{"id":{"repo_id":"birmingham","oai_identifier":"oai:etheses.bham.ac.uk:7139"},"canonical_url":"https://search.ndltd.org/etd/birmingham/oai:etheses.bham.ac.uk:7139","repository":{"repo_id":"birmingham","name":"University of Birmingham","base_url":"https://etheses.bham.ac.uk/cgi/oai2"},"display":{"title":"Effect of surface treatment and recycling on the mechanical properties of e-glass","abstract":"The primary focus of this study was to investigate the effect of removing the binder, by specified method, on the tensile strength of E-glass fibre bundle and composites. The methods investigated for removing the binder from E-glass fibres were: (i) fibre spreading; (ii) acetone-based treatment; and (iii) heat treatment in air and in a vacuum. In the first phase of the research, the effect of the above mentioned binder removal methods were investigated using the single-bundle tensile test. Binder removal via fibre spreading did not cause any reduction in the properties of E-glass fibre bundles. However, binder removal by acetone extraction led to a decrease of 37% in the tensile strength. The most detrimental effect on the tensile strength was found to be when E-glass was exposed to temperatures in excess of 450 °C. The percentage reduction in tensile strength for E-glass fibre bundle for 450 °C, 550 °C and 650 °C were 60%, 66% and 90% respectively. In the second phase of the research, E-glass bundles that were subjected to the above-mentioned treatments were used to fabricate single bundle composites. The procedure for manufacturing these composites was developed. It was established that the reduction in the strengths of the E-glass composites after specified treatment could be correlated to the reduction in properties experience by the fibre bundles. Attempts were made to analyse the treated fibres using a range of analytical techniques such as X-ray diffraction, thermographic analysis, differential scanning calorimetry and infrared spectroscopy analysis. Heat treating E-glass fibres in the absence of air was shown to bring about a reduction in the tensile strength by 58% as compared to 78% when the fibres were previously heated in air at 650 °C.","abstract_html":"The primary focus of this study was to investigate the effect of removing the binder, by specified method, on the tensile strength of E-glass fibre bundle and composites. The methods investigated for removing the binder from E-glass fibres were: (i) fibre spreading; (ii) acetone-based treatment; and (iii) heat treatment in air and in a vacuum. In the first phase of the research, the effect of the above mentioned binder removal methods were investigated using the single-bundle tensile test. Binder removal via fibre spreading did not cause any reduction in the properties of E-glass fibre bundles. However, binder removal by acetone extraction led to a decrease of 37% in the tensile strength. The most detrimental effect on the tensile strength was found to be when E-glass was exposed to temperatures in excess of 450 °C. The percentage reduction in tensile strength for E-glass fibre bundle for 450 °C, 550 °C and 650 °C were 60%, 66% and 90% respectively. In the second phase of the research, E-glass bundles that were subjected to the above-mentioned treatments were used to fabricate single bundle composites. The procedure for manufacturing these composites was developed. It was established that the reduction in the strengths of the E-glass composites after specified treatment could be correlated to the reduction in properties experience by the fibre bundles. Attempts were made to analyse the treated fibres using a range of analytical techniques such as X-ray diffraction, thermographic analysis, differential scanning calorimetry and infrared spectroscopy analysis. Heat treating E-glass fibres in the absence of air was shown to bring about a reduction in the tensile strength by 58% as compared to 78% when the fibres were previously heated in air at 650 °C.","abstract_has_math":false,"creators":["Ojo, Samuel Olukunle"],"institution":"University of Birmingham","degree_name":"d_ph","degree_level":"d_ph","degree_discipline":null,"degree_department":null,"school":null,"contributors":[],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2017,"date_issued":"2017-07","date_published":"2017-07","updated_at":"2026-11-19T09:29:11Z","subjects":["TJ Mechanical engineering and machinery","TN Mining engineering. Metallurgy"],"languages":["eng"],"rights":[],"rights_urls":[],"identifier_entries":[],"person_identifier_entries":[]},"links":{"outbound_url":null,"outbound_label":null,"outbound_source":null,"record_url":null,"record_label":null,"record_kind":null,"record_source":null,"download_url":"http://etheses.bham.ac.uk//id/eprint/7139/1/Ojo16PhD.pdf","download_label":"Download PDF","download_source":"dc:identifier.uri","access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://etheses.bham.ac.uk/cgi/oai2?verb=GetRecord&metadataPrefix=uketd_dc&identifier=oai%3Aetheses.bham.ac.uk%3A7139","prefix":"uketd_dc"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.sponsor","label":"Sponsor","values":["epsrc","other"]},{"key":"dc:creator","label":"Author","values":["Ojo, Samuel Olukunle"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2017-07"]},{"key":"dc:date.issued","label":"Date","values":["2017-07"]},{"key":"dc:publisher.department","label":"Dc Publisher Department","values":["College of Engineering & Physical Sciences","School of Metallurgy and Materials"]},{"key":"dc:publisher.institution","label":"Dc Publisher Institution","values":["University of Birmingham"]},{"key":"dc:relation.isreferencedby","label":"Dc Relation Isreferencedby","values":["http://etheses.bham.ac.uk//id/eprint/7139/"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"dc:type.qualificationlevel","label":"Dc Type Qualificationlevel","values":["d_ph"]},{"key":"dc:type.qualificationname","label":"Dc Type Qualificationname","values":["d_ph"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["TJ Mechanical engineering and machinery","TN Mining engineering. Metallurgy"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.dcterms_iso639_2","label":"Language (ISO 639-2)","values":["eng"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://etheses.bham.ac.uk//id/eprint/7139/1/Ojo16PhD.pdf","http://etheses.bham.ac.uk//id/eprint/7139/2/Decl_IS_Ojo16PhD.pdf"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["The primary focus of this study was to investigate the effect of removing the binder, by specified method, on the tensile strength of E-glass fibre bundle and composites. The methods investigated for removing the binder from E-glass fibres were: (i) fibre spreading; (ii) acetone-based treatment; and (iii) heat treatment in air and in a vacuum. In the first phase of the research, the effect of the above mentioned binder removal methods were investigated using the single-bundle tensile test. Binder removal via fibre spreading did not cause any reduction in the properties of E-glass fibre bundles. However, binder removal by acetone extraction led to a decrease of 37% in the tensile strength. The most detrimental effect on the tensile strength was found to be when E-glass was exposed to temperatures in excess of 450 °C. The percentage reduction in tensile strength for E-glass fibre bundle for 450 °C, 550 °C and 650 °C were 60%, 66% and 90% respectively. In the second phase of the research, E-glass bundles that were subjected to the above-mentioned treatments were used to fabricate single bundle composites. The procedure for manufacturing these composites was developed. It was established that the reduction in the strengths of the E-glass composites after specified treatment could be correlated to the reduction in properties experience by the fibre bundles. Attempts were made to analyse the treated fibres using a range of analytical techniques such as X-ray diffraction, thermographic analysis, differential scanning calorimetry and infrared spectroscopy analysis. Heat treating E-glass fibres in the absence of air was shown to bring about a reduction in the tensile strength by 58% as compared to 78% when the fibres were previously heated in air at 650 °C."]},{"key":"dc:format","label":"Dc Format","values":["application/pdf"]},{"key":"dcterms:accessrights","label":"Dcterms Accessrights","values":["public","staffonly"]},{"key":"dc:title","label":"Title","values":["Effect of surface treatment and recycling on the mechanical properties of e-glass"]}]}],"canonical_facts":{"dc:contributor.sponsor":["epsrc","other"],"dc:creator":["Ojo, Samuel Olukunle"],"dc:date":["2017-07"],"dc:date.issued":["2017-07"],"dc:description.abstract":["The primary focus of this study was to investigate the effect of removing the binder, by specified method, on the tensile strength of E-glass fibre bundle and composites. The methods investigated for removing the binder from E-glass fibres were: (i) fibre spreading; (ii) acetone-based treatment; and (iii) heat treatment in air and in a vacuum. In the first phase of the research, the effect of the above mentioned binder removal methods were investigated using the single-bundle tensile test. Binder removal via fibre spreading did not cause any reduction in the properties of E-glass fibre bundles. However, binder removal by acetone extraction led to a decrease of 37% in the tensile strength. The most detrimental effect on the tensile strength was found to be when E-glass was exposed to temperatures in excess of 450 °C. The percentage reduction in tensile strength for E-glass fibre bundle for 450 °C, 550 °C and 650 °C were 60%, 66% and 90% respectively. In the second phase of the research, E-glass bundles that were subjected to the above-mentioned treatments were used to fabricate single bundle composites. The procedure for manufacturing these composites was developed. It was established that the reduction in the strengths of the E-glass composites after specified treatment could be correlated to the reduction in properties experience by the fibre bundles. Attempts were made to analyse the treated fibres using a range of analytical techniques such as X-ray diffraction, thermographic analysis, differential scanning calorimetry and infrared spectroscopy analysis. Heat treating E-glass fibres in the absence of air was shown to bring about a reduction in the tensile strength by 58% as compared to 78% when the fibres were previously heated in air at 650 °C."],"dc:format":["application/pdf"],"dc:identifier.uri":["http://etheses.bham.ac.uk//id/eprint/7139/1/Ojo16PhD.pdf","http://etheses.bham.ac.uk//id/eprint/7139/2/Decl_IS_Ojo16PhD.pdf"],"dc:language.dcterms_iso639_2":["eng"],"dc:publisher.department":["College of Engineering & Physical Sciences","School of Metallurgy and Materials"],"dc:publisher.institution":["University of Birmingham"],"dc:relation.isreferencedby":["http://etheses.bham.ac.uk//id/eprint/7139/"],"dc:subject":["TJ Mechanical engineering and machinery","TN Mining engineering. Metallurgy"],"dcterms:accessrights":["public","staffonly"],"dc:title":["Effect of surface treatment and recycling on the mechanical properties of e-glass"],"dc:type":["Thesis"],"dc:type.qualificationlevel":["d_ph"],"dc:type.qualificationname":["d_ph"]},"updated_at":"2026-11-19T09:29:11Z"}