{"id":{"repo_id":"birmingham","oai_identifier":"oai:etheses.bham.ac.uk:7234"},"canonical_url":"https://search.ndltd.org/etd/birmingham/oai:etheses.bham.ac.uk:7234","repository":{"repo_id":"birmingham","name":"University of Birmingham","base_url":"https://etheses.bham.ac.uk/cgi/oai2"},"display":{"title":"The manufacture and testing of anode supported Ni-10Sc1CeSZ SOFCs for intermediate temperature operation","abstract":"Developing solid oxide fuel cell (SOFC) systems that operate in lower temperature regimes improves system stability, widens materials selection and lowers performance degradation issues previously observed with higher temperature cells. In this work, the development of an intermediate temperature SOFC (IT-SOFC) based on a Ce-doped Scandia-stabilised Zirconia (ScSZ) structure manufactured via screen-printing is outlined. In this thesis we report on the successful manufacture of anode supported 8YSZ baseline cells and cells containing Ni-10Sc1CeSZ anodes supporting 10Sc1CeSZ electrolytes both prepared via die pressing, screen-printing and co-sintering. Commercial 8YSZ and 10Sc1CeSZ reference cells were also tested. This research aims to demonstrate the viability of 10Sc1CeSZ within an IT-SOFC cell structure and examine the effectiveness of 10Sc1CeSZ on lowering the cell operating temperature. Results for the tested cells on H\\(_2\\) at 800\\(^o\\)C show the lab grade and commercial grade YSZ cells obtained OCV values of 1.06V and 1.04V and maximum power density values of 392 mW cm\\(^-\\)\\(^2\\) and 466 mW cm\\(^-\\)\\(^2\\) respectively. The commercial 10Sc1CeSZ cells exhibited the highest OCVs > 1.10V of all tested cells with the lowest area specific resistance of 0.496 Ω cm\\(^2\\) obtained for the lab grade 10Sc1CeSZ cells. Peak power densities of 68.24 mW cm\\(^-\\)\\(^2\\) and 9.12 mW cm\\(^-\\)\\(^2\\) at 800\\(^o\\)C were achieved for the biogas fuelled lab grade YSZ and 10Sc1CeSZ cells respectively.","abstract_html":"Developing solid oxide fuel cell (SOFC) systems that operate in lower temperature regimes improves system stability, widens materials selection and lowers performance degradation issues previously observed with higher temperature cells. In this work, the development of an intermediate temperature SOFC (IT-SOFC) based on a Ce-doped Scandia-stabilised Zirconia (ScSZ) structure manufactured via screen-printing is outlined. In this thesis we report on the successful manufacture of anode supported 8YSZ baseline cells and cells containing Ni-10Sc1CeSZ anodes supporting 10Sc1CeSZ electrolytes both prepared via die pressing, screen-printing and co-sintering. Commercial 8YSZ and 10Sc1CeSZ reference cells were also tested. This research aims to demonstrate the viability of 10Sc1CeSZ within an IT-SOFC cell structure and examine the effectiveness of 10Sc1CeSZ on lowering the cell operating temperature. Results for the tested cells on H<span class=\"etd-inline-math\"><sub>2</sub></span> at 800<span class=\"etd-inline-math\"><sup>o</sup></span>C show the lab grade and commercial grade YSZ cells obtained OCV values of 1.06V and 1.04V and maximum power density values of 392 mW cm<span class=\"etd-inline-math\"><sup>-</sup></span><span class=\"etd-inline-math\"><sup>2</sup></span> and 466 mW cm<span class=\"etd-inline-math\"><sup>-</sup></span><span class=\"etd-inline-math\"><sup>2</sup></span> respectively. The commercial 10Sc1CeSZ cells exhibited the highest OCVs &gt; 1.10V of all tested cells with the lowest area specific resistance of 0.496 Ω cm<span class=\"etd-inline-math\"><sup>2</sup></span> obtained for the lab grade 10Sc1CeSZ cells. Peak power densities of 68.24 mW cm<span class=\"etd-inline-math\"><sup>-</sup></span><span class=\"etd-inline-math\"><sup>2</sup></span> and 9.12 mW cm<span class=\"etd-inline-math\"><sup>-</sup></span><span class=\"etd-inline-math\"><sup>2</sup></span> at 800<span class=\"etd-inline-math\"><sup>o</sup></span>C were achieved for the biogas fuelled lab grade YSZ and 10Sc1CeSZ cells respectively.","abstract_has_math":true,"creators":["McDonald, Nikkia M."],"institution":"University of Birmingham","degree_name":"d_ph","degree_level":"d_ph","degree_discipline":null,"degree_department":null,"school":null,"contributors":[],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2017,"date_issued":"2017-07","date_published":"2017-07","updated_at":"2026-11-19T09:29:14Z","subjects":["TP Chemical technology"],"languages":["eng"],"rights":[],"rights_urls":[],"identifier_entries":[],"person_identifier_entries":[]},"links":{"outbound_url":null,"outbound_label":null,"outbound_source":null,"record_url":null,"record_label":null,"record_kind":null,"record_source":null,"download_url":"http://etheses.bham.ac.uk//id/eprint/7234/9/McDonald17PhD.pdf","download_label":"Download PDF","download_source":"dc:identifier.uri","access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://etheses.bham.ac.uk/cgi/oai2?verb=GetRecord&metadataPrefix=uketd_dc&identifier=oai%3Aetheses.bham.ac.uk%3A7234","prefix":"uketd_dc"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.sponsor","label":"Sponsor","values":["epsrc"]},{"key":"dc:creator","label":"Author","values":["McDonald, Nikkia M."]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2017-07"]},{"key":"dc:date.issued","label":"Date","values":["2017-07"]},{"key":"dc:publisher.department","label":"Dc Publisher Department","values":["College of Engineering & Physical Sciences","School of Chemical Engineering"]},{"key":"dc:publisher.institution","label":"Dc Publisher Institution","values":["University of Birmingham"]},{"key":"dc:relation.isreferencedby","label":"Dc Relation Isreferencedby","values":["http://etheses.bham.ac.uk//id/eprint/7234/"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"dc:type.qualificationlevel","label":"Dc Type Qualificationlevel","values":["d_ph"]},{"key":"dc:type.qualificationname","label":"Dc Type Qualificationname","values":["d_ph"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["TP Chemical technology"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.dcterms_iso639_2","label":"Language (ISO 639-2)","values":["eng"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://etheses.bham.ac.uk//id/eprint/7234/9/McDonald17PhD.pdf","http://etheses.bham.ac.uk//id/eprint/7234/5/Decl_IS_McDonald17PhD.pdf"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["Developing solid oxide fuel cell (SOFC) systems that operate in lower temperature regimes improves system stability, widens materials selection and lowers performance degradation issues previously observed with higher temperature cells. In this work, the development of an intermediate temperature SOFC (IT-SOFC) based on a Ce-doped Scandia-stabilised Zirconia (ScSZ) structure manufactured via screen-printing is outlined. In this thesis we report on the successful manufacture of anode supported 8YSZ baseline cells and cells containing Ni-10Sc1CeSZ anodes supporting 10Sc1CeSZ electrolytes both prepared via die pressing, screen-printing and co-sintering. Commercial 8YSZ and 10Sc1CeSZ reference cells were also tested. This research aims to demonstrate the viability of 10Sc1CeSZ within an IT-SOFC cell structure and examine the effectiveness of 10Sc1CeSZ on lowering the cell operating temperature. Results for the tested cells on H\\(_2\\) at 800\\(^o\\)C show the lab grade and commercial grade YSZ cells obtained OCV values of 1.06V and 1.04V and maximum power density values of 392 mW cm\\(^-\\)\\(^2\\) and 466 mW cm\\(^-\\)\\(^2\\) respectively. The commercial 10Sc1CeSZ cells exhibited the highest OCVs > 1.10V of all tested cells with the lowest area specific resistance of 0.496 Ω cm\\(^2\\) obtained for the lab grade 10Sc1CeSZ cells. Peak power densities of 68.24 mW cm\\(^-\\)\\(^2\\) and 9.12 mW cm\\(^-\\)\\(^2\\) at 800\\(^o\\)C were achieved for the biogas fuelled lab grade YSZ and 10Sc1CeSZ cells respectively."]},{"key":"dc:format","label":"Dc Format","values":["application/pdf"]},{"key":"dcterms:accessrights","label":"Dcterms Accessrights","values":["public","staffonly"]},{"key":"dc:title","label":"Title","values":["The manufacture and testing of anode supported Ni-10Sc1CeSZ SOFCs for intermediate temperature operation"]}]}],"canonical_facts":{"dc:contributor.sponsor":["epsrc"],"dc:creator":["McDonald, Nikkia M."],"dc:date":["2017-07"],"dc:date.issued":["2017-07"],"dc:description.abstract":["Developing solid oxide fuel cell (SOFC) systems that operate in lower temperature regimes improves system stability, widens materials selection and lowers performance degradation issues previously observed with higher temperature cells. In this work, the development of an intermediate temperature SOFC (IT-SOFC) based on a Ce-doped Scandia-stabilised Zirconia (ScSZ) structure manufactured via screen-printing is outlined. In this thesis we report on the successful manufacture of anode supported 8YSZ baseline cells and cells containing Ni-10Sc1CeSZ anodes supporting 10Sc1CeSZ electrolytes both prepared via die pressing, screen-printing and co-sintering. Commercial 8YSZ and 10Sc1CeSZ reference cells were also tested. This research aims to demonstrate the viability of 10Sc1CeSZ within an IT-SOFC cell structure and examine the effectiveness of 10Sc1CeSZ on lowering the cell operating temperature. Results for the tested cells on H\\(_2\\) at 800\\(^o\\)C show the lab grade and commercial grade YSZ cells obtained OCV values of 1.06V and 1.04V and maximum power density values of 392 mW cm\\(^-\\)\\(^2\\) and 466 mW cm\\(^-\\)\\(^2\\) respectively. The commercial 10Sc1CeSZ cells exhibited the highest OCVs > 1.10V of all tested cells with the lowest area specific resistance of 0.496 Ω cm\\(^2\\) obtained for the lab grade 10Sc1CeSZ cells. Peak power densities of 68.24 mW cm\\(^-\\)\\(^2\\) and 9.12 mW cm\\(^-\\)\\(^2\\) at 800\\(^o\\)C were achieved for the biogas fuelled lab grade YSZ and 10Sc1CeSZ cells respectively."],"dc:format":["application/pdf"],"dc:identifier.uri":["http://etheses.bham.ac.uk//id/eprint/7234/9/McDonald17PhD.pdf","http://etheses.bham.ac.uk//id/eprint/7234/5/Decl_IS_McDonald17PhD.pdf"],"dc:language.dcterms_iso639_2":["eng"],"dc:publisher.department":["College of Engineering & Physical Sciences","School of Chemical Engineering"],"dc:publisher.institution":["University of Birmingham"],"dc:relation.isreferencedby":["http://etheses.bham.ac.uk//id/eprint/7234/"],"dc:subject":["TP Chemical technology"],"dcterms:accessrights":["public","staffonly"],"dc:title":["The manufacture and testing of anode supported Ni-10Sc1CeSZ SOFCs for intermediate temperature operation"],"dc:type":["Thesis"],"dc:type.qualificationlevel":["d_ph"],"dc:type.qualificationname":["d_ph"]},"updated_at":"2026-11-19T09:29:14Z"}