{"id":{"repo_id":"birmingham","oai_identifier":"oai:etheses.bham.ac.uk:7299"},"canonical_url":"https://search.ndltd.org/etd/birmingham/oai:etheses.bham.ac.uk:7299","repository":{"repo_id":"birmingham","name":"University of Birmingham","base_url":"https://etheses.bham.ac.uk/cgi/oai2"},"display":{"title":"Characterisation of crystallisation and melting in thermoplastic polymers using chip calorimetry","abstract":"Fast scanning chip-calorimetry was used to explore the crystallisation and melting of three semi-crystalline polymers. The heating and cooling rates required to prevent crystallisation on cooling (from above Tm) and on re-heating (from below T\\(_g\\)) were determined as: 3,000 and 8,000˚C/s respectively in PCL, 75 and 250˚C/s respectively in PEEK and 10 and 100˚C/s respectively in PLA. The effect of the thermal lag was considered using indium as a standard and corrections of >5˚C were required at rates in excess of 5,000˚C/s. As readily observed in conventional DSC (CDSC), PEEK exhibited a double melting endotherm and this was attributed to a melting-recrystallisation-melting process. The absence of recrystallisation above 250˚C allowed a Hoffman-Weeks analysis to be carried out over a broader temperature range than is general possible in CDSC. The interplay between thermal lag and re-crystallisation was analysed using heating rates covering 5 orders of magnitude. At an optimum heating rate of 1,500 ˚C/s, an equilibrium melting temperature of 359˚C was determined. The consideration of thermal lag led to the measurement of diffusivity using the technique of laser flash apparatus (LFA). The high measurement speed in the LFA allowed a time and temperature resolved study of diffusivity in PLA. LFA, chip-calorimetry and CDSC were used in parallel to explore the cold-crystallisation kinetics of PLA and the development of the relatively unstable α’ crystals. A good correlation between chip-calorimetry and LFA was found, showing an Avrami exponent of 2 and nucleation constant of 6.58 x10\\(^5\\) and 6.87 x10\\(^5\\) respectively, corresponding to regime III.","abstract_html":"Fast scanning chip-calorimetry was used to explore the crystallisation and melting of three semi-crystalline polymers. The heating and cooling rates required to prevent crystallisation on cooling (from above Tm) and on re-heating (from below T<span class=\"etd-inline-math\"><sub>g</sub></span>) were determined as: 3,000 and 8,000˚C/s respectively in PCL, 75 and 250˚C/s respectively in PEEK and 10 and 100˚C/s respectively in PLA. The effect of the thermal lag was considered using indium as a standard and corrections of &gt;5˚C were required at rates in excess of 5,000˚C/s. As readily observed in conventional DSC (CDSC), PEEK exhibited a double melting endotherm and this was attributed to a melting-recrystallisation-melting process. The absence of recrystallisation above 250˚C allowed a Hoffman-Weeks analysis to be carried out over a broader temperature range than is general possible in CDSC. The interplay between thermal lag and re-crystallisation was analysed using heating rates covering 5 orders of magnitude. At an optimum heating rate of 1,500 ˚C/s, an equilibrium melting temperature of 359˚C was determined. The consideration of thermal lag led to the measurement of diffusivity using the technique of laser flash apparatus (LFA). The high measurement speed in the LFA allowed a time and temperature resolved study of diffusivity in PLA. LFA, chip-calorimetry and CDSC were used in parallel to explore the cold-crystallisation kinetics of PLA and the development of the relatively unstable α’ crystals. A good correlation between chip-calorimetry and LFA was found, showing an Avrami exponent of 2 and nucleation constant of 6.58 x10<span class=\"etd-inline-math\"><sup>5</sup></span> and 6.87 x10<span class=\"etd-inline-math\"><sup>5</sup></span> respectively, corresponding to regime III.","abstract_has_math":true,"creators":["Marsh, Joseph Jack"],"institution":"University of Birmingham","degree_name":"d_ph","degree_level":"d_ph","degree_discipline":null,"degree_department":null,"school":null,"contributors":[],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2017,"date_issued":"2017-07","date_published":"2017-07","updated_at":"2026-11-19T09:29:17Z","subjects":["TN Mining engineering. Metallurgy"],"languages":["eng"],"rights":[],"rights_urls":[],"identifier_entries":[],"person_identifier_entries":[]},"links":{"outbound_url":null,"outbound_label":null,"outbound_source":null,"record_url":null,"record_label":null,"record_kind":null,"record_source":null,"download_url":"http://etheses.bham.ac.uk//id/eprint/7299/1/Marsh17PhD.pdf","download_label":"Download PDF","download_source":"dc:identifier.uri","access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://etheses.bham.ac.uk/cgi/oai2?verb=GetRecord&metadataPrefix=uketd_dc&identifier=oai%3Aetheses.bham.ac.uk%3A7299","prefix":"uketd_dc"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.sponsor","label":"Sponsor","values":["na"]},{"key":"dc:creator","label":"Author","values":["Marsh, Joseph Jack"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2017-07"]},{"key":"dc:date.issued","label":"Date","values":["2017-07"]},{"key":"dc:publisher.department","label":"Dc Publisher Department","values":["College of Engineering & Physical Sciences","School of Metallurgy and Materials"]},{"key":"dc:publisher.institution","label":"Dc Publisher Institution","values":["University of Birmingham"]},{"key":"dc:relation.isreferencedby","label":"Dc Relation Isreferencedby","values":["http://etheses.bham.ac.uk//id/eprint/7299/"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"dc:type.qualificationlevel","label":"Dc Type Qualificationlevel","values":["d_ph"]},{"key":"dc:type.qualificationname","label":"Dc Type Qualificationname","values":["d_ph"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["TN Mining engineering. Metallurgy"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.dcterms_iso639_2","label":"Language (ISO 639-2)","values":["eng"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://etheses.bham.ac.uk//id/eprint/7299/1/Marsh17PhD.pdf","http://etheses.bham.ac.uk//id/eprint/7299/2/Decl_IS_Marsh17PhD.pdf"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["Fast scanning chip-calorimetry was used to explore the crystallisation and melting of three semi-crystalline polymers. The heating and cooling rates required to prevent crystallisation on cooling (from above Tm) and on re-heating (from below T\\(_g\\)) were determined as: 3,000 and 8,000˚C/s respectively in PCL, 75 and 250˚C/s respectively in PEEK and 10 and 100˚C/s respectively in PLA. The effect of the thermal lag was considered using indium as a standard and corrections of >5˚C were required at rates in excess of 5,000˚C/s. As readily observed in conventional DSC (CDSC), PEEK exhibited a double melting endotherm and this was attributed to a melting-recrystallisation-melting process. The absence of recrystallisation above 250˚C allowed a Hoffman-Weeks analysis to be carried out over a broader temperature range than is general possible in CDSC. The interplay between thermal lag and re-crystallisation was analysed using heating rates covering 5 orders of magnitude. At an optimum heating rate of 1,500 ˚C/s, an equilibrium melting temperature of 359˚C was determined. The consideration of thermal lag led to the measurement of diffusivity using the technique of laser flash apparatus (LFA). The high measurement speed in the LFA allowed a time and temperature resolved study of diffusivity in PLA. LFA, chip-calorimetry and CDSC were used in parallel to explore the cold-crystallisation kinetics of PLA and the development of the relatively unstable α’ crystals. A good correlation between chip-calorimetry and LFA was found, showing an Avrami exponent of 2 and nucleation constant of 6.58 x10\\(^5\\) and 6.87 x10\\(^5\\) respectively, corresponding to regime III."]},{"key":"dc:format","label":"Dc Format","values":["application/pdf"]},{"key":"dcterms:accessrights","label":"Dcterms Accessrights","values":["public","staffonly"]},{"key":"dc:title","label":"Title","values":["Characterisation of crystallisation and melting in thermoplastic polymers using chip calorimetry"]}]}],"canonical_facts":{"dc:contributor.sponsor":["na"],"dc:creator":["Marsh, Joseph Jack"],"dc:date":["2017-07"],"dc:date.issued":["2017-07"],"dc:description.abstract":["Fast scanning chip-calorimetry was used to explore the crystallisation and melting of three semi-crystalline polymers. The heating and cooling rates required to prevent crystallisation on cooling (from above Tm) and on re-heating (from below T\\(_g\\)) were determined as: 3,000 and 8,000˚C/s respectively in PCL, 75 and 250˚C/s respectively in PEEK and 10 and 100˚C/s respectively in PLA. The effect of the thermal lag was considered using indium as a standard and corrections of >5˚C were required at rates in excess of 5,000˚C/s. As readily observed in conventional DSC (CDSC), PEEK exhibited a double melting endotherm and this was attributed to a melting-recrystallisation-melting process. The absence of recrystallisation above 250˚C allowed a Hoffman-Weeks analysis to be carried out over a broader temperature range than is general possible in CDSC. The interplay between thermal lag and re-crystallisation was analysed using heating rates covering 5 orders of magnitude. At an optimum heating rate of 1,500 ˚C/s, an equilibrium melting temperature of 359˚C was determined. The consideration of thermal lag led to the measurement of diffusivity using the technique of laser flash apparatus (LFA). The high measurement speed in the LFA allowed a time and temperature resolved study of diffusivity in PLA. LFA, chip-calorimetry and CDSC were used in parallel to explore the cold-crystallisation kinetics of PLA and the development of the relatively unstable α’ crystals. A good correlation between chip-calorimetry and LFA was found, showing an Avrami exponent of 2 and nucleation constant of 6.58 x10\\(^5\\) and 6.87 x10\\(^5\\) respectively, corresponding to regime III."],"dc:format":["application/pdf"],"dc:identifier.uri":["http://etheses.bham.ac.uk//id/eprint/7299/1/Marsh17PhD.pdf","http://etheses.bham.ac.uk//id/eprint/7299/2/Decl_IS_Marsh17PhD.pdf"],"dc:language.dcterms_iso639_2":["eng"],"dc:publisher.department":["College of Engineering & Physical Sciences","School of Metallurgy and Materials"],"dc:publisher.institution":["University of Birmingham"],"dc:relation.isreferencedby":["http://etheses.bham.ac.uk//id/eprint/7299/"],"dc:subject":["TN Mining engineering. Metallurgy"],"dcterms:accessrights":["public","staffonly"],"dc:title":["Characterisation of crystallisation and melting in thermoplastic polymers using chip calorimetry"],"dc:type":["Thesis"],"dc:type.qualificationlevel":["d_ph"],"dc:type.qualificationname":["d_ph"]},"updated_at":"2026-11-19T09:29:17Z"}