{"id":{"repo_id":"birmingham","oai_identifier":"oai:etheses.bham.ac.uk:7390"},"canonical_url":"https://search.ndltd.org/etd/birmingham/oai:etheses.bham.ac.uk:7390","repository":{"repo_id":"birmingham","name":"University of Birmingham","base_url":"https://etheses.bham.ac.uk/cgi/oai2"},"display":{"title":"Atmospheric corrosion of austenitic stainless steels","abstract":"Atmospheric corrosion was investigated using electrochemical and droplet studies. The effects of changes in bulk solution concentration and local pit chemistry on pit propagation and repassivation of 304L and 316L stainless steels were investigated using \\(in\\) \\(situ\\) synchrotron X-radiation and electrochemical techniques. Radiography and zig-zag electrochemical sweeps showed that in dilute chloride solutions, partial passivation was observed to initiate locally and propagate across the corroding surface. This caused repassivation gradually rather than as a uniform event. In concentrated chloride solutions, repassivation did not show a sudden drop in current but rather a gradual decrease as potential swept down. Pitting behaviour was also affected by solution concentration. Dilute solutions showed metastable pitting followed by a sharp breakdown (pitting) potential. Concentrated solutions however showed no metastability and a gradual increase in current when pitting. To determine the cause of current oscillations in 304L artificial pits in NaCl:NaNO\\(_3\\) solutions near the repassivation potential, the salt layers were scanned \\(in\\) \\(situ\\) using XRD. The salt layer was confirmed to be FeCl\\(_2\\).4H\\(_2\\)O and no nitrate salt was found. A mechanism was suggested to explain the current oscillations in terms of partial passivation being undercut by the advancing corrosion front.","abstract_html":"Atmospheric corrosion was investigated using electrochemical and droplet studies. The effects of changes in bulk solution concentration and local pit chemistry on pit propagation and repassivation of 304L and 316L stainless steels were investigated using \\(in\\) \\(situ\\) synchrotron X-radiation and electrochemical techniques. Radiography and zig-zag electrochemical sweeps showed that in dilute chloride solutions, partial passivation was observed to initiate locally and propagate across the corroding surface. This caused repassivation gradually rather than as a uniform event. In concentrated chloride solutions, repassivation did not show a sudden drop in current but rather a gradual decrease as potential swept down. Pitting behaviour was also affected by solution concentration. Dilute solutions showed metastable pitting followed by a sharp breakdown (pitting) potential. Concentrated solutions however showed no metastability and a gradual increase in current when pitting. To determine the cause of current oscillations in 304L artificial pits in NaCl:NaNO<span class=\"etd-inline-math\"><sub>3</sub></span> solutions near the repassivation potential, the salt layers were scanned \\(in\\) \\(situ\\) using XRD. The salt layer was confirmed to be FeCl<span class=\"etd-inline-math\"><sub>2</sub></span>.4H<span class=\"etd-inline-math\"><sub>2</sub></span>O and no nitrate salt was found. A mechanism was suggested to explain the current oscillations in terms of partial passivation being undercut by the advancing corrosion front.","abstract_has_math":true,"creators":["Street, Steven Richard"],"institution":"University of Birmingham","degree_name":"d_ph","degree_level":"d_ph","degree_discipline":null,"degree_department":null,"school":null,"contributors":[],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2017,"date_issued":"2017-07","date_published":"2017-07","updated_at":"2026-11-19T09:29:25Z","subjects":["TN Mining engineering. Metallurgy"],"languages":["eng"],"rights":[],"rights_urls":[],"identifier_entries":[],"person_identifier_entries":[]},"links":{"outbound_url":null,"outbound_label":null,"outbound_source":null,"record_url":null,"record_label":null,"record_kind":null,"record_source":null,"download_url":"http://etheses.bham.ac.uk//id/eprint/7390/1/Street17PhD.pdf","download_label":"Download PDF","download_source":"dc:identifier.uri","access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://etheses.bham.ac.uk/cgi/oai2?verb=GetRecord&metadataPrefix=uketd_dc&identifier=oai%3Aetheses.bham.ac.uk%3A7390","prefix":"uketd_dc"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.sponsor","label":"Sponsor","values":["na"]},{"key":"dc:creator","label":"Author","values":["Street, Steven Richard"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2017-07"]},{"key":"dc:date.issued","label":"Date","values":["2017-07"]},{"key":"dc:publisher.department","label":"Dc Publisher Department","values":["College of Engineering & Physical Sciences","School of Metallurgy and Materials"]},{"key":"dc:publisher.institution","label":"Dc Publisher Institution","values":["University of Birmingham"]},{"key":"dc:relation.isreferencedby","label":"Dc Relation Isreferencedby","values":["http://etheses.bham.ac.uk//id/eprint/7390/"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"dc:type.qualificationlevel","label":"Dc Type Qualificationlevel","values":["d_ph"]},{"key":"dc:type.qualificationname","label":"Dc Type Qualificationname","values":["d_ph"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["TN Mining engineering. Metallurgy"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.dcterms_iso639_2","label":"Language (ISO 639-2)","values":["eng"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://etheses.bham.ac.uk//id/eprint/7390/1/Street17PhD.pdf","http://etheses.bham.ac.uk//id/eprint/7390/2/Decl_IS_Street17PhD.pdf"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["Atmospheric corrosion was investigated using electrochemical and droplet studies. The effects of changes in bulk solution concentration and local pit chemistry on pit propagation and repassivation of 304L and 316L stainless steels were investigated using \\(in\\) \\(situ\\) synchrotron X-radiation and electrochemical techniques. Radiography and zig-zag electrochemical sweeps showed that in dilute chloride solutions, partial passivation was observed to initiate locally and propagate across the corroding surface. This caused repassivation gradually rather than as a uniform event. In concentrated chloride solutions, repassivation did not show a sudden drop in current but rather a gradual decrease as potential swept down. Pitting behaviour was also affected by solution concentration. Dilute solutions showed metastable pitting followed by a sharp breakdown (pitting) potential. Concentrated solutions however showed no metastability and a gradual increase in current when pitting. To determine the cause of current oscillations in 304L artificial pits in NaCl:NaNO\\(_3\\) solutions near the repassivation potential, the salt layers were scanned \\(in\\) \\(situ\\) using XRD. The salt layer was confirmed to be FeCl\\(_2\\).4H\\(_2\\)O and no nitrate salt was found. A mechanism was suggested to explain the current oscillations in terms of partial passivation being undercut by the advancing corrosion front."]},{"key":"dc:format","label":"Dc Format","values":["application/pdf"]},{"key":"dcterms:accessrights","label":"Dcterms Accessrights","values":["public","staffonly"]},{"key":"dc:title","label":"Title","values":["Atmospheric corrosion of austenitic stainless steels"]}]}],"canonical_facts":{"dc:contributor.sponsor":["na"],"dc:creator":["Street, Steven Richard"],"dc:date":["2017-07"],"dc:date.issued":["2017-07"],"dc:description.abstract":["Atmospheric corrosion was investigated using electrochemical and droplet studies. The effects of changes in bulk solution concentration and local pit chemistry on pit propagation and repassivation of 304L and 316L stainless steels were investigated using \\(in\\) \\(situ\\) synchrotron X-radiation and electrochemical techniques. Radiography and zig-zag electrochemical sweeps showed that in dilute chloride solutions, partial passivation was observed to initiate locally and propagate across the corroding surface. This caused repassivation gradually rather than as a uniform event. In concentrated chloride solutions, repassivation did not show a sudden drop in current but rather a gradual decrease as potential swept down. Pitting behaviour was also affected by solution concentration. Dilute solutions showed metastable pitting followed by a sharp breakdown (pitting) potential. Concentrated solutions however showed no metastability and a gradual increase in current when pitting. To determine the cause of current oscillations in 304L artificial pits in NaCl:NaNO\\(_3\\) solutions near the repassivation potential, the salt layers were scanned \\(in\\) \\(situ\\) using XRD. The salt layer was confirmed to be FeCl\\(_2\\).4H\\(_2\\)O and no nitrate salt was found. A mechanism was suggested to explain the current oscillations in terms of partial passivation being undercut by the advancing corrosion front."],"dc:format":["application/pdf"],"dc:identifier.uri":["http://etheses.bham.ac.uk//id/eprint/7390/1/Street17PhD.pdf","http://etheses.bham.ac.uk//id/eprint/7390/2/Decl_IS_Street17PhD.pdf"],"dc:language.dcterms_iso639_2":["eng"],"dc:publisher.department":["College of Engineering & Physical Sciences","School of Metallurgy and Materials"],"dc:publisher.institution":["University of Birmingham"],"dc:relation.isreferencedby":["http://etheses.bham.ac.uk//id/eprint/7390/"],"dc:subject":["TN Mining engineering. Metallurgy"],"dcterms:accessrights":["public","staffonly"],"dc:title":["Atmospheric corrosion of austenitic stainless steels"],"dc:type":["Thesis"],"dc:type.qualificationlevel":["d_ph"],"dc:type.qualificationname":["d_ph"]},"updated_at":"2026-11-19T09:29:25Z"}