{"id":{"repo_id":"birmingham","oai_identifier":"oai:etheses.bham.ac.uk:7537"},"canonical_url":"https://search.ndltd.org/etd/birmingham/oai:etheses.bham.ac.uk:7537","repository":{"repo_id":"birmingham","name":"University of Birmingham","base_url":"https://etheses.bham.ac.uk/cgi/oai2"},"display":{"title":"The behaviour of double oxide film defects in the processing of liquid Mg alloys","abstract":"The global demand for Mg alloys continually grew in the last 20 years, motivating a wide interest in the improvement of the mechanical properties of Mg-alloy castings. In addition, the existence of double oxide film defects, which were widely recognised as a major factor in the quality and reproducibility of the properties of light-alloy castings, has been demonstrated in Mg-alloy castings. Thus it became important to understand behaviour of double oxide film defects formed in Mg-alloys. In the work reported here, three different Mg alloys (commercial pure Mg, AZ91 alloy, and Mg-Y alloys) and two cover gases (SF6/air and SF6/CO2), were used, in order to involve different doubled oxide films which may have different behaviours. Direct and cross-sectional observations of the double oxide film defects formed the Mg-alloy castings protected by different cover gases were obtained via a Scanning Electron Microscopy (SEM), and the focus ion beam milling (FIB) technique. In addition, oxide films growing on the corresponding Mg-alloy melt surfaces were also investigated. Based on the observed film structures in conjunction with a thermochemical calculation, evolution processes of the different double oxide film defects were suggested. The quality of Mg-alloy castings was evaluated by the Weibull modulus, which is popularly used to discriminate “good” and “bad” castings. A shortcoming of the traditional Weibull estimation method (i.e. linear least square method) was demonstrated, and a new estimation method was therefore come up with. The Weibull modulus result revealed that air can confer an improvement in the quality of AZ91 castings, compared with CO2.","abstract_html":"The global demand for Mg alloys continually grew in the last 20 years, motivating a wide interest in the improvement of the mechanical properties of Mg-alloy castings. In addition, the existence of double oxide film defects, which were widely recognised as a major factor in the quality and reproducibility of the properties of light-alloy castings, has been demonstrated in Mg-alloy castings. Thus it became important to understand behaviour of double oxide film defects formed in Mg-alloys. In the work reported here, three different Mg alloys (commercial pure Mg, AZ91 alloy, and Mg-Y alloys) and two cover gases (SF6/air and SF6/CO2), were used, in order to involve different doubled oxide films which may have different behaviours. Direct and cross-sectional observations of the double oxide film defects formed the Mg-alloy castings protected by different cover gases were obtained via a Scanning Electron Microscopy (SEM), and the focus ion beam milling (FIB) technique. In addition, oxide films growing on the corresponding Mg-alloy melt surfaces were also investigated. Based on the observed film structures in conjunction with a thermochemical calculation, evolution processes of the different double oxide film defects were suggested. The quality of Mg-alloy castings was evaluated by the Weibull modulus, which is popularly used to discriminate “good” and “bad” castings. A shortcoming of the traditional Weibull estimation method (i.e. linear least square method) was demonstrated, and a new estimation method was therefore come up with. The Weibull modulus result revealed that air can confer an improvement in the quality of AZ91 castings, compared with CO2.","abstract_has_math":false,"creators":["Li, Tian"],"institution":"University of Birmingham","degree_name":"d_ph","degree_level":"d_ph","degree_discipline":null,"degree_department":null,"school":null,"contributors":[],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2017,"date_issued":"2017-07","date_published":"2017-07","updated_at":"2026-11-19T09:29:31Z","subjects":["TN Mining engineering. Metallurgy"],"languages":["eng"],"rights":[],"rights_urls":[],"identifier_entries":[],"person_identifier_entries":[]},"links":{"outbound_url":null,"outbound_label":null,"outbound_source":null,"record_url":null,"record_label":null,"record_kind":null,"record_source":null,"download_url":"http://etheses.bham.ac.uk//id/eprint/7537/1/Li17PhD.pdf","download_label":"Download PDF","download_source":"dc:identifier.uri","access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://etheses.bham.ac.uk/cgi/oai2?verb=GetRecord&metadataPrefix=uketd_dc&identifier=oai%3Aetheses.bham.ac.uk%3A7537","prefix":"uketd_dc"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.sponsor","label":"Sponsor","values":["na"]},{"key":"dc:creator","label":"Author","values":["Li, Tian"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2017-07"]},{"key":"dc:date.issued","label":"Date","values":["2017-07"]},{"key":"dc:publisher.department","label":"Dc Publisher Department","values":["College of Engineering & Physical Sciences","School of Metallurgy and Materials"]},{"key":"dc:publisher.institution","label":"Dc Publisher Institution","values":["University of Birmingham"]},{"key":"dc:relation.isreferencedby","label":"Dc Relation Isreferencedby","values":["http://etheses.bham.ac.uk//id/eprint/7537/"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"dc:type.qualificationlevel","label":"Dc Type Qualificationlevel","values":["d_ph"]},{"key":"dc:type.qualificationname","label":"Dc Type Qualificationname","values":["d_ph"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["TN Mining engineering. Metallurgy"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.dcterms_iso639_2","label":"Language (ISO 639-2)","values":["eng"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://etheses.bham.ac.uk//id/eprint/7537/1/Li17PhD.pdf","http://etheses.bham.ac.uk//id/eprint/7537/2/Decl_IS_Li17PhD.pdf"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["The global demand for Mg alloys continually grew in the last 20 years, motivating a wide interest in the improvement of the mechanical properties of Mg-alloy castings. In addition, the existence of double oxide film defects, which were widely recognised as a major factor in the quality and reproducibility of the properties of light-alloy castings, has been demonstrated in Mg-alloy castings. Thus it became important to understand behaviour of double oxide film defects formed in Mg-alloys. In the work reported here, three different Mg alloys (commercial pure Mg, AZ91 alloy, and Mg-Y alloys) and two cover gases (SF6/air and SF6/CO2), were used, in order to involve different doubled oxide films which may have different behaviours. Direct and cross-sectional observations of the double oxide film defects formed the Mg-alloy castings protected by different cover gases were obtained via a Scanning Electron Microscopy (SEM), and the focus ion beam milling (FIB) technique. In addition, oxide films growing on the corresponding Mg-alloy melt surfaces were also investigated. Based on the observed film structures in conjunction with a thermochemical calculation, evolution processes of the different double oxide film defects were suggested. The quality of Mg-alloy castings was evaluated by the Weibull modulus, which is popularly used to discriminate “good” and “bad” castings. A shortcoming of the traditional Weibull estimation method (i.e. linear least square method) was demonstrated, and a new estimation method was therefore come up with. The Weibull modulus result revealed that air can confer an improvement in the quality of AZ91 castings, compared with CO2."]},{"key":"dc:format","label":"Dc Format","values":["application/pdf"]},{"key":"dcterms:accessrights","label":"Dcterms Accessrights","values":["public","staffonly"]},{"key":"dc:title","label":"Title","values":["The behaviour of double oxide film defects in the processing of liquid Mg alloys"]}]}],"canonical_facts":{"dc:contributor.sponsor":["na"],"dc:creator":["Li, Tian"],"dc:date":["2017-07"],"dc:date.issued":["2017-07"],"dc:description.abstract":["The global demand for Mg alloys continually grew in the last 20 years, motivating a wide interest in the improvement of the mechanical properties of Mg-alloy castings. In addition, the existence of double oxide film defects, which were widely recognised as a major factor in the quality and reproducibility of the properties of light-alloy castings, has been demonstrated in Mg-alloy castings. Thus it became important to understand behaviour of double oxide film defects formed in Mg-alloys. In the work reported here, three different Mg alloys (commercial pure Mg, AZ91 alloy, and Mg-Y alloys) and two cover gases (SF6/air and SF6/CO2), were used, in order to involve different doubled oxide films which may have different behaviours. Direct and cross-sectional observations of the double oxide film defects formed the Mg-alloy castings protected by different cover gases were obtained via a Scanning Electron Microscopy (SEM), and the focus ion beam milling (FIB) technique. In addition, oxide films growing on the corresponding Mg-alloy melt surfaces were also investigated. Based on the observed film structures in conjunction with a thermochemical calculation, evolution processes of the different double oxide film defects were suggested. The quality of Mg-alloy castings was evaluated by the Weibull modulus, which is popularly used to discriminate “good” and “bad” castings. A shortcoming of the traditional Weibull estimation method (i.e. linear least square method) was demonstrated, and a new estimation method was therefore come up with. The Weibull modulus result revealed that air can confer an improvement in the quality of AZ91 castings, compared with CO2."],"dc:format":["application/pdf"],"dc:identifier.uri":["http://etheses.bham.ac.uk//id/eprint/7537/1/Li17PhD.pdf","http://etheses.bham.ac.uk//id/eprint/7537/2/Decl_IS_Li17PhD.pdf"],"dc:language.dcterms_iso639_2":["eng"],"dc:publisher.department":["College of Engineering & Physical Sciences","School of Metallurgy and Materials"],"dc:publisher.institution":["University of Birmingham"],"dc:relation.isreferencedby":["http://etheses.bham.ac.uk//id/eprint/7537/"],"dc:subject":["TN Mining engineering. Metallurgy"],"dcterms:accessrights":["public","staffonly"],"dc:title":["The behaviour of double oxide film defects in the processing of liquid Mg alloys"],"dc:type":["Thesis"],"dc:type.qualificationlevel":["d_ph"],"dc:type.qualificationname":["d_ph"]},"updated_at":"2026-11-19T09:29:31Z"}