{"id":{"repo_id":"birmingham","oai_identifier":"oai:etheses.bham.ac.uk:7782"},"canonical_url":"https://search.ndltd.org/etd/birmingham/oai:etheses.bham.ac.uk:7782","repository":{"repo_id":"birmingham","name":"University of Birmingham","base_url":"https://etheses.bham.ac.uk/cgi/oai2"},"display":{"title":"Fabrication and characterisation of graphene-based multi-functional coatings","abstract":"This research was aimed at exploring different surface engineering techniques towards cost-effective and scalable fabrication of graphene-based coatings on metallic surfaces. Graphene oxide (GO) was employed as the coating precursor, and various coating routes, including electrophoretic deposition (EPD), self-assembly, electroplating and electro-brush plating were investigated in the project. The results have showed that both EPD and self-assembly are capable for depositing thin and uniform GO coatings on steel. The tribological and corrosion tests on EPD-GO coatings have showed promising properties of the GO coatings. It has also been found that pre-modification of the steel surface with a self-assembled monolayer of silane can also enhance the bonding of the GO sheets to the steel surface, thus improving the wear performance of the ultra-thin GO coating. The electro-brush plated Ni-GO nano-composite coatings have exhibited significantly improved compactness and homogeneity. A grain refinement and improvement in mechanical properties were observed. More importantly, the GO-containing nano-composite coatings have exhibited enhanced thermal stability after annealing at elevated temperatures up to 600 ℃. Meanwhile, the Ni-GO composite coatings showed clearly improved tribological and anti-corrosion performance. The findings indicate that electro-brush plating is a very promising technique to produce novel nano-composite coatings.","abstract_html":"This research was aimed at exploring different surface engineering techniques towards cost-effective and scalable fabrication of graphene-based coatings on metallic surfaces. Graphene oxide (GO) was employed as the coating precursor, and various coating routes, including electrophoretic deposition (EPD), self-assembly, electroplating and electro-brush plating were investigated in the project. The results have showed that both EPD and self-assembly are capable for depositing thin and uniform GO coatings on steel. The tribological and corrosion tests on EPD-GO coatings have showed promising properties of the GO coatings. It has also been found that pre-modification of the steel surface with a self-assembled monolayer of silane can also enhance the bonding of the GO sheets to the steel surface, thus improving the wear performance of the ultra-thin GO coating. The electro-brush plated Ni-GO nano-composite coatings have exhibited significantly improved compactness and homogeneity. A grain refinement and improvement in mechanical properties were observed. More importantly, the GO-containing nano-composite coatings have exhibited enhanced thermal stability after annealing at elevated temperatures up to 600 ℃. Meanwhile, the Ni-GO composite coatings showed clearly improved tribological and anti-corrosion performance. The findings indicate that electro-brush plating is a very promising technique to produce novel nano-composite coatings.","abstract_has_math":false,"creators":["Qi, Shaojun"],"institution":"University of Birmingham","degree_name":"d_ph","degree_level":"d_ph","degree_discipline":null,"degree_department":null,"school":null,"contributors":[],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2017,"date_issued":"2017-12","date_published":"2017-12","updated_at":"2026-11-19T09:29:38Z","subjects":["TN Mining engineering. Metallurgy"],"languages":["eng"],"rights":[],"rights_urls":[],"identifier_entries":[],"person_identifier_entries":[]},"links":{"outbound_url":null,"outbound_label":null,"outbound_source":null,"record_url":null,"record_label":null,"record_kind":null,"record_source":null,"download_url":"http://etheses.bham.ac.uk//id/eprint/7782/1/Qi17PhD.pdf","download_label":"Download PDF","download_source":"dc:identifier.uri","access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://etheses.bham.ac.uk/cgi/oai2?verb=GetRecord&metadataPrefix=uketd_dc&identifier=oai%3Aetheses.bham.ac.uk%3A7782","prefix":"uketd_dc"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.sponsor","label":"Sponsor","values":["other"]},{"key":"dc:creator","label":"Author","values":["Qi, Shaojun"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2017-12"]},{"key":"dc:date.issued","label":"Date","values":["2017-12"]},{"key":"dc:publisher.department","label":"Dc Publisher Department","values":["College of Engineering & Physical Sciences","School of Metallurgy and Materials"]},{"key":"dc:publisher.institution","label":"Dc Publisher Institution","values":["University of Birmingham"]},{"key":"dc:relation.isreferencedby","label":"Dc Relation Isreferencedby","values":["http://etheses.bham.ac.uk//id/eprint/7782/"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"dc:type.qualificationlevel","label":"Dc Type Qualificationlevel","values":["d_ph"]},{"key":"dc:type.qualificationname","label":"Dc Type Qualificationname","values":["d_ph"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["TN Mining engineering. Metallurgy"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.dcterms_iso639_2","label":"Language (ISO 639-2)","values":["eng"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://etheses.bham.ac.uk//id/eprint/7782/1/Qi17PhD.pdf","http://etheses.bham.ac.uk//id/eprint/7782/2/Decl_IS_Qi17PhD.pdf"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["This research was aimed at exploring different surface engineering techniques towards cost-effective and scalable fabrication of graphene-based coatings on metallic surfaces. Graphene oxide (GO) was employed as the coating precursor, and various coating routes, including electrophoretic deposition (EPD), self-assembly, electroplating and electro-brush plating were investigated in the project. The results have showed that both EPD and self-assembly are capable for depositing thin and uniform GO coatings on steel. The tribological and corrosion tests on EPD-GO coatings have showed promising properties of the GO coatings. It has also been found that pre-modification of the steel surface with a self-assembled monolayer of silane can also enhance the bonding of the GO sheets to the steel surface, thus improving the wear performance of the ultra-thin GO coating. The electro-brush plated Ni-GO nano-composite coatings have exhibited significantly improved compactness and homogeneity. A grain refinement and improvement in mechanical properties were observed. More importantly, the GO-containing nano-composite coatings have exhibited enhanced thermal stability after annealing at elevated temperatures up to 600 ℃. Meanwhile, the Ni-GO composite coatings showed clearly improved tribological and anti-corrosion performance. The findings indicate that electro-brush plating is a very promising technique to produce novel nano-composite coatings."]},{"key":"dc:format","label":"Dc Format","values":["application/pdf"]},{"key":"dcterms:accessrights","label":"Dcterms Accessrights","values":["public","staffonly"]},{"key":"dc:title","label":"Title","values":["Fabrication and characterisation of graphene-based multi-functional coatings"]}]}],"canonical_facts":{"dc:contributor.sponsor":["other"],"dc:creator":["Qi, Shaojun"],"dc:date":["2017-12"],"dc:date.issued":["2017-12"],"dc:description.abstract":["This research was aimed at exploring different surface engineering techniques towards cost-effective and scalable fabrication of graphene-based coatings on metallic surfaces. Graphene oxide (GO) was employed as the coating precursor, and various coating routes, including electrophoretic deposition (EPD), self-assembly, electroplating and electro-brush plating were investigated in the project. The results have showed that both EPD and self-assembly are capable for depositing thin and uniform GO coatings on steel. The tribological and corrosion tests on EPD-GO coatings have showed promising properties of the GO coatings. It has also been found that pre-modification of the steel surface with a self-assembled monolayer of silane can also enhance the bonding of the GO sheets to the steel surface, thus improving the wear performance of the ultra-thin GO coating. The electro-brush plated Ni-GO nano-composite coatings have exhibited significantly improved compactness and homogeneity. A grain refinement and improvement in mechanical properties were observed. More importantly, the GO-containing nano-composite coatings have exhibited enhanced thermal stability after annealing at elevated temperatures up to 600 ℃. Meanwhile, the Ni-GO composite coatings showed clearly improved tribological and anti-corrosion performance. The findings indicate that electro-brush plating is a very promising technique to produce novel nano-composite coatings."],"dc:format":["application/pdf"],"dc:identifier.uri":["http://etheses.bham.ac.uk//id/eprint/7782/1/Qi17PhD.pdf","http://etheses.bham.ac.uk//id/eprint/7782/2/Decl_IS_Qi17PhD.pdf"],"dc:language.dcterms_iso639_2":["eng"],"dc:publisher.department":["College of Engineering & Physical Sciences","School of Metallurgy and Materials"],"dc:publisher.institution":["University of Birmingham"],"dc:relation.isreferencedby":["http://etheses.bham.ac.uk//id/eprint/7782/"],"dc:subject":["TN Mining engineering. Metallurgy"],"dcterms:accessrights":["public","staffonly"],"dc:title":["Fabrication and characterisation of graphene-based multi-functional coatings"],"dc:type":["Thesis"],"dc:type.qualificationlevel":["d_ph"],"dc:type.qualificationname":["d_ph"]},"updated_at":"2026-11-19T09:29:38Z"}