{"id":{"repo_id":"birmingham","oai_identifier":"oai:etheses.bham.ac.uk:8075"},"canonical_url":"https://search.ndltd.org/etd/birmingham/oai:etheses.bham.ac.uk:8075","repository":{"repo_id":"birmingham","name":"University of Birmingham","base_url":"https://etheses.bham.ac.uk/cgi/oai2"},"display":{"title":"Design and evaluation of an encapsulated artificial disc","abstract":"Artificial discs have been developed to replace and restore motion to degenerated intervertebral discs. The most common configuration for these devices include ball and socket articulation surfaces that can induce high frictional torques and wear rates. When these particles interact with the surrounding tissues they can induce inflammations leading to osteolysis, subsidence of the implant and then revision surgery. A new device has been developed to reduce friction and eliminate wear migration that incorporates an elastomer sheath to encapsulate the disc, retaining debris and an optimised bio-lubricant. The artificial disc has been assessed with an experimental programme that compared the resistive torques of the artificial discs both with and without encapsulation, for a range of motions. Durability tests were also conducted to 2M cycles and gravimetric wear rate was measured in accordance with BS 18192-1: 2011. Encapsulating the articulating surfaces reduced resistive torques and completely eliminated debris migration. Wear rates within the sheath ranged from 10.1 to 11.3 mg/million cycles, well within acceptable levels for this type of device. The encapsulated discs successfully contained all wear debris and displayed durability in excess of 2M accelerated life cycles. The concept of an encapsulated artificial disc has been shown to be feasible and could replace current technologies.","abstract_html":"Artificial discs have been developed to replace and restore motion to degenerated intervertebral discs. The most common configuration for these devices include ball and socket articulation surfaces that can induce high frictional torques and wear rates. When these particles interact with the surrounding tissues they can induce inflammations leading to osteolysis, subsidence of the implant and then revision surgery. A new device has been developed to reduce friction and eliminate wear migration that incorporates an elastomer sheath to encapsulate the disc, retaining debris and an optimised bio-lubricant. The artificial disc has been assessed with an experimental programme that compared the resistive torques of the artificial discs both with and without encapsulation, for a range of motions. Durability tests were also conducted to 2M cycles and gravimetric wear rate was measured in accordance with BS 18192-1: 2011. Encapsulating the articulating surfaces reduced resistive torques and completely eliminated debris migration. Wear rates within the sheath ranged from 10.1 to 11.3 mg/million cycles, well within acceptable levels for this type of device. The encapsulated discs successfully contained all wear debris and displayed durability in excess of 2M accelerated life cycles. The concept of an encapsulated artificial disc has been shown to be feasible and could replace current technologies.","abstract_has_math":false,"creators":["Alnaimat, Feras Adnan Mohammad"],"institution":"University of Birmingham","degree_name":"d_ph","degree_level":"d_ph","degree_discipline":null,"degree_department":null,"school":null,"contributors":[],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2018,"date_issued":"2018-07","date_published":"2018-07","updated_at":"2026-11-19T09:29:44Z","subjects":["RD Surgery","TJ Mechanical engineering and machinery","TS Manufactures"],"languages":["eng"],"rights":[],"rights_urls":[],"identifier_entries":[],"person_identifier_entries":[]},"links":{"outbound_url":null,"outbound_label":null,"outbound_source":null,"record_url":null,"record_label":null,"record_kind":null,"record_source":null,"download_url":"http://etheses.bham.ac.uk//id/eprint/8075/1/Alnaimat18PhD.pdf","download_label":"Download PDF","download_source":"dc:identifier.uri","access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://etheses.bham.ac.uk/cgi/oai2?verb=GetRecord&metadataPrefix=uketd_dc&identifier=oai%3Aetheses.bham.ac.uk%3A8075","prefix":"uketd_dc"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.sponsor","label":"Sponsor","values":["na"]},{"key":"dc:creator","label":"Author","values":["Alnaimat, Feras Adnan Mohammad"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2018-07"]},{"key":"dc:date.issued","label":"Date","values":["2018-07"]},{"key":"dc:publisher.department","label":"Dc Publisher Department","values":["College of Engineering & Physical Sciences","School of Engineering, Department of Mechanical Engineering"]},{"key":"dc:publisher.institution","label":"Dc Publisher Institution","values":["University of Birmingham"]},{"key":"dc:relation.isreferencedby","label":"Dc Relation Isreferencedby","values":["http://etheses.bham.ac.uk//id/eprint/8075/"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"dc:type.qualificationlevel","label":"Dc Type Qualificationlevel","values":["d_ph"]},{"key":"dc:type.qualificationname","label":"Dc Type Qualificationname","values":["d_ph"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["RD Surgery","TJ Mechanical engineering and machinery","TS Manufactures"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.dcterms_iso639_2","label":"Language (ISO 639-2)","values":["eng"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://etheses.bham.ac.uk//id/eprint/8075/1/Alnaimat18PhD.pdf","http://etheses.bham.ac.uk//id/eprint/8075/2/Decl_IS_Alnaimat18PhD.pdf"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["Artificial discs have been developed to replace and restore motion to degenerated intervertebral discs. The most common configuration for these devices include ball and socket articulation surfaces that can induce high frictional torques and wear rates. When these particles interact with the surrounding tissues they can induce inflammations leading to osteolysis, subsidence of the implant and then revision surgery. A new device has been developed to reduce friction and eliminate wear migration that incorporates an elastomer sheath to encapsulate the disc, retaining debris and an optimised bio-lubricant. The artificial disc has been assessed with an experimental programme that compared the resistive torques of the artificial discs both with and without encapsulation, for a range of motions. Durability tests were also conducted to 2M cycles and gravimetric wear rate was measured in accordance with BS 18192-1: 2011. Encapsulating the articulating surfaces reduced resistive torques and completely eliminated debris migration. Wear rates within the sheath ranged from 10.1 to 11.3 mg/million cycles, well within acceptable levels for this type of device. The encapsulated discs successfully contained all wear debris and displayed durability in excess of 2M accelerated life cycles. The concept of an encapsulated artificial disc has been shown to be feasible and could replace current technologies."]},{"key":"dc:format","label":"Dc Format","values":["application/pdf"]},{"key":"dcterms:accessrights","label":"Dcterms Accessrights","values":["public","staffonly"]},{"key":"dc:title","label":"Title","values":["Design and evaluation of an encapsulated artificial disc"]}]}],"canonical_facts":{"dc:contributor.sponsor":["na"],"dc:creator":["Alnaimat, Feras Adnan Mohammad"],"dc:date":["2018-07"],"dc:date.issued":["2018-07"],"dc:description.abstract":["Artificial discs have been developed to replace and restore motion to degenerated intervertebral discs. The most common configuration for these devices include ball and socket articulation surfaces that can induce high frictional torques and wear rates. When these particles interact with the surrounding tissues they can induce inflammations leading to osteolysis, subsidence of the implant and then revision surgery. A new device has been developed to reduce friction and eliminate wear migration that incorporates an elastomer sheath to encapsulate the disc, retaining debris and an optimised bio-lubricant. The artificial disc has been assessed with an experimental programme that compared the resistive torques of the artificial discs both with and without encapsulation, for a range of motions. Durability tests were also conducted to 2M cycles and gravimetric wear rate was measured in accordance with BS 18192-1: 2011. Encapsulating the articulating surfaces reduced resistive torques and completely eliminated debris migration. Wear rates within the sheath ranged from 10.1 to 11.3 mg/million cycles, well within acceptable levels for this type of device. The encapsulated discs successfully contained all wear debris and displayed durability in excess of 2M accelerated life cycles. The concept of an encapsulated artificial disc has been shown to be feasible and could replace current technologies."],"dc:format":["application/pdf"],"dc:identifier.uri":["http://etheses.bham.ac.uk//id/eprint/8075/1/Alnaimat18PhD.pdf","http://etheses.bham.ac.uk//id/eprint/8075/2/Decl_IS_Alnaimat18PhD.pdf"],"dc:language.dcterms_iso639_2":["eng"],"dc:publisher.department":["College of Engineering & Physical Sciences","School of Engineering, Department of Mechanical Engineering"],"dc:publisher.institution":["University of Birmingham"],"dc:relation.isreferencedby":["http://etheses.bham.ac.uk//id/eprint/8075/"],"dc:subject":["RD Surgery","TJ Mechanical engineering and machinery","TS Manufactures"],"dcterms:accessrights":["public","staffonly"],"dc:title":["Design and evaluation of an encapsulated artificial disc"],"dc:type":["Thesis"],"dc:type.qualificationlevel":["d_ph"],"dc:type.qualificationname":["d_ph"]},"updated_at":"2026-11-19T09:29:44Z"}