{"id":{"repo_id":"birmingham","oai_identifier":"oai:etheses.bham.ac.uk:8205"},"canonical_url":"https://search.ndltd.org/etd/birmingham/oai:etheses.bham.ac.uk:8205","repository":{"repo_id":"birmingham","name":"University of Birmingham","base_url":"https://etheses.bham.ac.uk/cgi/oai2"},"display":{"title":"Cyclic steam oxidation of a steel for biomass power plant application","abstract":"Austenitic stainless steels are commonly used as heat exchanger tubing in power plants. As a result, this class of steels have been optimised to withstand high temperatures and pressures. However, under these conditions, the alloy will experience oxidation which greatly affects the lifetime of the materials. The increased likelihood of more cyclic operating conditions means a greater level of understanding of the oxidation and spallation behaviour of these alloys is required. High temperature oxidation studies available in the literature principally emphasise isothermal oxidation of flat plates rather than curved surfaces representative of boiler tubing. The isothermal and cyclic steam oxidation and spallation behaviour of TP347H FG was studied in this thesis. Electron microscopy and elemental characterisation showed the oxide encompasses an inner Fe-Cr-Ni spinel and an outer magnetite layer. A haematite layer forms during initial stages of oxidation in air-saturated steam conditions similar to the oxides formed in plant. The use of a novel technique, termed STORME, made it possible to identify the chemistry of the spalled oxide and also allowed calculations of the interfacial fracture energy to be made and the spallation mechanism to be identified. Modelling of the spallation observed enables predictions of spallation behaviour to be made.","abstract_html":"Austenitic stainless steels are commonly used as heat exchanger tubing in power plants. As a result, this class of steels have been optimised to withstand high temperatures and pressures. However, under these conditions, the alloy will experience oxidation which greatly affects the lifetime of the materials. The increased likelihood of more cyclic operating conditions means a greater level of understanding of the oxidation and spallation behaviour of these alloys is required. High temperature oxidation studies available in the literature principally emphasise isothermal oxidation of flat plates rather than curved surfaces representative of boiler tubing. The isothermal and cyclic steam oxidation and spallation behaviour of TP347H FG was studied in this thesis. Electron microscopy and elemental characterisation showed the oxide encompasses an inner Fe-Cr-Ni spinel and an outer magnetite layer. A haematite layer forms during initial stages of oxidation in air-saturated steam conditions similar to the oxides formed in plant. The use of a novel technique, termed STORME, made it possible to identify the chemistry of the spalled oxide and also allowed calculations of the interfacial fracture energy to be made and the spallation mechanism to be identified. Modelling of the spallation observed enables predictions of spallation behaviour to be made.","abstract_has_math":false,"creators":["Mobbs, Rebecca-Louise"],"institution":"University of Birmingham","degree_name":"d_en","degree_level":"d_en","degree_discipline":null,"degree_department":null,"school":null,"contributors":[],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2018,"date_issued":"2018-07","date_published":"2018-07","updated_at":"2026-11-19T09:30:03Z","subjects":["TN Mining engineering. Metallurgy"],"languages":["eng"],"rights":[],"rights_urls":[],"identifier_entries":[],"person_identifier_entries":[]},"links":{"outbound_url":null,"outbound_label":null,"outbound_source":null,"record_url":null,"record_label":null,"record_kind":null,"record_source":null,"download_url":"http://etheses.bham.ac.uk//id/eprint/8205/2/Mobbs18EngD.pdf","download_label":"Download PDF","download_source":"dc:identifier.uri","access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://etheses.bham.ac.uk/cgi/oai2?verb=GetRecord&metadataPrefix=uketd_dc&identifier=oai%3Aetheses.bham.ac.uk%3A8205","prefix":"uketd_dc"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.sponsor","label":"Sponsor","values":["na"]},{"key":"dc:creator","label":"Author","values":["Mobbs, Rebecca-Louise"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2018-07"]},{"key":"dc:date.issued","label":"Date","values":["2018-07"]},{"key":"dc:publisher.department","label":"Dc Publisher Department","values":["College of Engineering & Physical Sciences","School of Metallurgy and Materials"]},{"key":"dc:publisher.institution","label":"Dc Publisher Institution","values":["University of Birmingham"]},{"key":"dc:relation.isreferencedby","label":"Dc Relation Isreferencedby","values":["http://etheses.bham.ac.uk//id/eprint/8205/"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"dc:type.qualificationlevel","label":"Dc Type Qualificationlevel","values":["d_en"]},{"key":"dc:type.qualificationname","label":"Dc Type Qualificationname","values":["d_en"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["TN Mining engineering. Metallurgy"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.dcterms_iso639_2","label":"Language (ISO 639-2)","values":["eng"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://etheses.bham.ac.uk//id/eprint/8205/2/Mobbs18EngD.pdf","http://etheses.bham.ac.uk//id/eprint/8205/1/Decl_IS_Mobbs18EngD.pdf"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["Austenitic stainless steels are commonly used as heat exchanger tubing in power plants. As a result, this class of steels have been optimised to withstand high temperatures and pressures. However, under these conditions, the alloy will experience oxidation which greatly affects the lifetime of the materials. The increased likelihood of more cyclic operating conditions means a greater level of understanding of the oxidation and spallation behaviour of these alloys is required. High temperature oxidation studies available in the literature principally emphasise isothermal oxidation of flat plates rather than curved surfaces representative of boiler tubing. The isothermal and cyclic steam oxidation and spallation behaviour of TP347H FG was studied in this thesis. Electron microscopy and elemental characterisation showed the oxide encompasses an inner Fe-Cr-Ni spinel and an outer magnetite layer. A haematite layer forms during initial stages of oxidation in air-saturated steam conditions similar to the oxides formed in plant. The use of a novel technique, termed STORME, made it possible to identify the chemistry of the spalled oxide and also allowed calculations of the interfacial fracture energy to be made and the spallation mechanism to be identified. Modelling of the spallation observed enables predictions of spallation behaviour to be made."]},{"key":"dc:format","label":"Dc Format","values":["application/pdf"]},{"key":"dcterms:accessrights","label":"Dcterms Accessrights","values":["public","staffonly"]},{"key":"dc:title","label":"Title","values":["Cyclic steam oxidation of a steel for biomass power plant application"]}]}],"canonical_facts":{"dc:contributor.sponsor":["na"],"dc:creator":["Mobbs, Rebecca-Louise"],"dc:date":["2018-07"],"dc:date.issued":["2018-07"],"dc:description.abstract":["Austenitic stainless steels are commonly used as heat exchanger tubing in power plants. As a result, this class of steels have been optimised to withstand high temperatures and pressures. However, under these conditions, the alloy will experience oxidation which greatly affects the lifetime of the materials. The increased likelihood of more cyclic operating conditions means a greater level of understanding of the oxidation and spallation behaviour of these alloys is required. High temperature oxidation studies available in the literature principally emphasise isothermal oxidation of flat plates rather than curved surfaces representative of boiler tubing. The isothermal and cyclic steam oxidation and spallation behaviour of TP347H FG was studied in this thesis. Electron microscopy and elemental characterisation showed the oxide encompasses an inner Fe-Cr-Ni spinel and an outer magnetite layer. A haematite layer forms during initial stages of oxidation in air-saturated steam conditions similar to the oxides formed in plant. The use of a novel technique, termed STORME, made it possible to identify the chemistry of the spalled oxide and also allowed calculations of the interfacial fracture energy to be made and the spallation mechanism to be identified. Modelling of the spallation observed enables predictions of spallation behaviour to be made."],"dc:format":["application/pdf"],"dc:identifier.uri":["http://etheses.bham.ac.uk//id/eprint/8205/2/Mobbs18EngD.pdf","http://etheses.bham.ac.uk//id/eprint/8205/1/Decl_IS_Mobbs18EngD.pdf"],"dc:language.dcterms_iso639_2":["eng"],"dc:publisher.department":["College of Engineering & Physical Sciences","School of Metallurgy and Materials"],"dc:publisher.institution":["University of Birmingham"],"dc:relation.isreferencedby":["http://etheses.bham.ac.uk//id/eprint/8205/"],"dc:subject":["TN Mining engineering. Metallurgy"],"dcterms:accessrights":["public","staffonly"],"dc:title":["Cyclic steam oxidation of a steel for biomass power plant application"],"dc:type":["Thesis"],"dc:type.qualificationlevel":["d_en"],"dc:type.qualificationname":["d_en"]},"updated_at":"2026-11-19T09:30:03Z"}