{"id":{"repo_id":"birmingham","oai_identifier":"oai:etheses.bham.ac.uk:8356"},"canonical_url":"https://search.ndltd.org/etd/birmingham/oai:etheses.bham.ac.uk:8356","repository":{"repo_id":"birmingham","name":"University of Birmingham","base_url":"https://etheses.bham.ac.uk/cgi/oai2"},"display":{"title":"Extraction and modification of lignin to support enhanced utilisation using critical fluids","abstract":"Lignin is abundant naturally occurring biopolymer currently produced as a by-product from the pulping and paper industry, where the process generates lignin in the form of lignosulphonates. While there are many applications for lignin there are all low value and attempts to add value to lignin are hindered by its complex physico-chemical nature and the presence of sulphur. Adopting the biorefining concept the study evaluates the impact of direct (DE) and sequential extraction (SE) of Miscanthus x giganteus using sub-critical water with associated modifiers on the physical and chemical properties of the extracted lignin. Even though higher delignification was achieved by DE (81.5%) than SE (58.0%), the lignin recovered from the SE process showed significantly higher purity (91.5%). Fourier Transform Infrared Spectroscopy (FTIR) analysis also revealed the abundance of free hydroxyl groups (OH) within the lignin derived from SE. Further it was demonstrated that lignin agglomerates, which are widely known to form post extraction, could be de-agglomerated by simply reducing the ethanol concentration from 50% to 1% and therefore intramolecular forces. Although the finding does not offer an adequate explanation regards to the driving forces of lignin aggregates at different ethanol concentration, the esterification reaction to attach C12 fatty acids to lignin derived from SE at 50% ethanol concentration (5 mg/mL) demonstrated that the amount of hydroxyl groups available increased the level of fatty acid incorporated onto the lignin macromolecule with 81.2% esterification conversion. A modified lignin produced has the potential to be used as a precursor for added value bio-based materials.","abstract_html":"Lignin is abundant naturally occurring biopolymer currently produced as a by-product from the pulping and paper industry, where the process generates lignin in the form of lignosulphonates. While there are many applications for lignin there are all low value and attempts to add value to lignin are hindered by its complex physico-chemical nature and the presence of sulphur. Adopting the biorefining concept the study evaluates the impact of direct (DE) and sequential extraction (SE) of Miscanthus x giganteus using sub-critical water with associated modifiers on the physical and chemical properties of the extracted lignin. Even though higher delignification was achieved by DE (81.5%) than SE (58.0%), the lignin recovered from the SE process showed significantly higher purity (91.5%). Fourier Transform Infrared Spectroscopy (FTIR) analysis also revealed the abundance of free hydroxyl groups (OH) within the lignin derived from SE. Further it was demonstrated that lignin agglomerates, which are widely known to form post extraction, could be de-agglomerated by simply reducing the ethanol concentration from 50% to 1% and therefore intramolecular forces. Although the finding does not offer an adequate explanation regards to the driving forces of lignin aggregates at different ethanol concentration, the esterification reaction to attach C12 fatty acids to lignin derived from SE at 50% ethanol concentration (5 mg/mL) demonstrated that the amount of hydroxyl groups available increased the level of fatty acid incorporated onto the lignin macromolecule with 81.2% esterification conversion. A modified lignin produced has the potential to be used as a precursor for added value bio-based materials.","abstract_has_math":false,"creators":["Hamzah, Muhammad Hazwan Bin"],"institution":"University of Birmingham","degree_name":"d_ph","degree_level":"d_ph","degree_discipline":null,"degree_department":null,"school":null,"contributors":[],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2018,"date_issued":"2018-07","date_published":"2018-07","updated_at":"2026-11-19T09:30:10Z","subjects":["TP Chemical technology"],"languages":["eng"],"rights":[],"rights_urls":[],"identifier_entries":[],"person_identifier_entries":[]},"links":{"outbound_url":null,"outbound_label":null,"outbound_source":null,"record_url":null,"record_label":null,"record_kind":null,"record_source":null,"download_url":"http://etheses.bham.ac.uk//id/eprint/8356/1/Hamzah18PhD.pdf","download_label":"Download PDF","download_source":"dc:identifier.uri","access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://etheses.bham.ac.uk/cgi/oai2?verb=GetRecord&metadataPrefix=uketd_dc&identifier=oai%3Aetheses.bham.ac.uk%3A8356","prefix":"uketd_dc"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.sponsor","label":"Sponsor","values":["other"]},{"key":"dc:creator","label":"Author","values":["Hamzah, Muhammad Hazwan Bin"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2018-07"]},{"key":"dc:date.issued","label":"Date","values":["2018-07"]},{"key":"dc:publisher.department","label":"Dc Publisher Department","values":["College of Engineering & Physical Sciences","School of Chemical Engineering"]},{"key":"dc:publisher.institution","label":"Dc Publisher Institution","values":["University of Birmingham"]},{"key":"dc:relation.isreferencedby","label":"Dc Relation Isreferencedby","values":["http://etheses.bham.ac.uk//id/eprint/8356/"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"dc:type.qualificationlevel","label":"Dc Type Qualificationlevel","values":["d_ph"]},{"key":"dc:type.qualificationname","label":"Dc Type Qualificationname","values":["d_ph"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["TP Chemical technology"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.dcterms_iso639_2","label":"Language (ISO 639-2)","values":["eng"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://etheses.bham.ac.uk//id/eprint/8356/1/Hamzah18PhD.pdf","http://etheses.bham.ac.uk//id/eprint/8356/2/Decl_IS_Hamzah18PhD.pdf"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["Lignin is abundant naturally occurring biopolymer currently produced as a by-product from the pulping and paper industry, where the process generates lignin in the form of lignosulphonates. While there are many applications for lignin there are all low value and attempts to add value to lignin are hindered by its complex physico-chemical nature and the presence of sulphur. Adopting the biorefining concept the study evaluates the impact of direct (DE) and sequential extraction (SE) of Miscanthus x giganteus using sub-critical water with associated modifiers on the physical and chemical properties of the extracted lignin. Even though higher delignification was achieved by DE (81.5%) than SE (58.0%), the lignin recovered from the SE process showed significantly higher purity (91.5%). Fourier Transform Infrared Spectroscopy (FTIR) analysis also revealed the abundance of free hydroxyl groups (OH) within the lignin derived from SE. Further it was demonstrated that lignin agglomerates, which are widely known to form post extraction, could be de-agglomerated by simply reducing the ethanol concentration from 50% to 1% and therefore intramolecular forces. Although the finding does not offer an adequate explanation regards to the driving forces of lignin aggregates at different ethanol concentration, the esterification reaction to attach C12 fatty acids to lignin derived from SE at 50% ethanol concentration (5 mg/mL) demonstrated that the amount of hydroxyl groups available increased the level of fatty acid incorporated onto the lignin macromolecule with 81.2% esterification conversion. A modified lignin produced has the potential to be used as a precursor for added value bio-based materials."]},{"key":"dc:format","label":"Dc Format","values":["application/pdf"]},{"key":"dcterms:accessrights","label":"Dcterms Accessrights","values":["public","staffonly"]},{"key":"dc:title","label":"Title","values":["Extraction and modification of lignin to support enhanced utilisation using critical fluids"]}]}],"canonical_facts":{"dc:contributor.sponsor":["other"],"dc:creator":["Hamzah, Muhammad Hazwan Bin"],"dc:date":["2018-07"],"dc:date.issued":["2018-07"],"dc:description.abstract":["Lignin is abundant naturally occurring biopolymer currently produced as a by-product from the pulping and paper industry, where the process generates lignin in the form of lignosulphonates. While there are many applications for lignin there are all low value and attempts to add value to lignin are hindered by its complex physico-chemical nature and the presence of sulphur. Adopting the biorefining concept the study evaluates the impact of direct (DE) and sequential extraction (SE) of Miscanthus x giganteus using sub-critical water with associated modifiers on the physical and chemical properties of the extracted lignin. Even though higher delignification was achieved by DE (81.5%) than SE (58.0%), the lignin recovered from the SE process showed significantly higher purity (91.5%). Fourier Transform Infrared Spectroscopy (FTIR) analysis also revealed the abundance of free hydroxyl groups (OH) within the lignin derived from SE. Further it was demonstrated that lignin agglomerates, which are widely known to form post extraction, could be de-agglomerated by simply reducing the ethanol concentration from 50% to 1% and therefore intramolecular forces. Although the finding does not offer an adequate explanation regards to the driving forces of lignin aggregates at different ethanol concentration, the esterification reaction to attach C12 fatty acids to lignin derived from SE at 50% ethanol concentration (5 mg/mL) demonstrated that the amount of hydroxyl groups available increased the level of fatty acid incorporated onto the lignin macromolecule with 81.2% esterification conversion. A modified lignin produced has the potential to be used as a precursor for added value bio-based materials."],"dc:format":["application/pdf"],"dc:identifier.uri":["http://etheses.bham.ac.uk//id/eprint/8356/1/Hamzah18PhD.pdf","http://etheses.bham.ac.uk//id/eprint/8356/2/Decl_IS_Hamzah18PhD.pdf"],"dc:language.dcterms_iso639_2":["eng"],"dc:publisher.department":["College of Engineering & Physical Sciences","School of Chemical Engineering"],"dc:publisher.institution":["University of Birmingham"],"dc:relation.isreferencedby":["http://etheses.bham.ac.uk//id/eprint/8356/"],"dc:subject":["TP Chemical technology"],"dcterms:accessrights":["public","staffonly"],"dc:title":["Extraction and modification of lignin to support enhanced utilisation using critical fluids"],"dc:type":["Thesis"],"dc:type.qualificationlevel":["d_ph"],"dc:type.qualificationname":["d_ph"]},"updated_at":"2026-11-19T09:30:10Z"}