{"id":{"repo_id":"bu","oai_identifier":"oai:open.bu.edu:2144/26403"},"canonical_url":"https://search.ndltd.org/etd/bu/oai:open.bu.edu:2144/26403","repository":{"repo_id":"bu","name":"Boston University","base_url":"https://open.bu.edu/oai/request"},"display":{"title":"Failure load of CAD/CAM-generated all ceramic posterior endocrowns","abstract":"PURPOSE: To evaluate and compare the failure load of milled and bonded IPS e.max CAD and VITA ENAMIC endocrowns used in the restoration of endodontically molar teeth. MATERIALS AND METHODS: Typodont tooth # 30 was prepared with a central cavity to support the endocrowns. Fifty-eight epoxy resin dies were made from a physical impression of the prepared tooth and scanned with an intra oral scanner (Cerec AC, Dentsply-Sirona). The designed restorations were milled from two different materials: VITA ENAMIC (n=30) and IPS e.max CAD (n=28). Following adhesive cementation, half of the endocrowns of each group were subjected to thermal aging, each specimen was obliquely loaded until failure. Four groups were tested: group 1 (Enamic endocrowns without thermocycling), group 2 (Enamic endocrowns + thermocycling), group 3 (e.max endocrowns without thermocycling) and group 4 (e.max endocrowns + thermocycling). The fracture mode characteristics were identified. RESULTS: There was a significant difference in the mean failure loads between group 4 and group 3 at P ≤ 0.05; also between group 4 and group 1 at P ≤ 0.05. Group 1 had the highest value of 2301 N. A visual inspection of all tested endocrowns revealed four different failure modes; 1-Adhesive failure, 2-Cohesive failure, 3-Mixed failure and 4-Fracture Initiation In Crown Propagating Through Die. CONCLUSION: Thermocycling decreased the load to failure significantly for IPS e.max CAD endocrowns. Mode of failure 4 and 1 were the dominant failure modes for VITA ENAMIC and IPS e.max CAD respectively.","abstract_html":"PURPOSE: To evaluate and compare the failure load of milled and bonded IPS e.max CAD and VITA ENAMIC endocrowns used in the restoration of endodontically molar teeth. MATERIALS AND METHODS: Typodont tooth # 30 was prepared with a central cavity to support the endocrowns. Fifty-eight epoxy resin dies were made from a physical impression of the prepared tooth and scanned with an intra oral scanner (Cerec AC, Dentsply-Sirona). The designed restorations were milled from two different materials: VITA ENAMIC (n=30) and IPS e.max CAD (n=28). Following adhesive cementation, half of the endocrowns of each group were subjected to thermal aging, each specimen was obliquely loaded until failure. Four groups were tested: group 1 (Enamic endocrowns without thermocycling), group 2 (Enamic endocrowns + thermocycling), group 3 (e.max endocrowns without thermocycling) and group 4 (e.max endocrowns + thermocycling). The fracture mode characteristics were identified. RESULTS: There was a significant difference in the mean failure loads between group 4 and group 3 at P ≤ 0.05; also between group 4 and group 1 at P ≤ 0.05. Group 1 had the highest value of 2301 N. A visual inspection of all tested endocrowns revealed four different failure modes; 1-Adhesive failure, 2-Cohesive failure, 3-Mixed failure and 4-Fracture Initiation In Crown Propagating Through Die. CONCLUSION: Thermocycling decreased the load to failure significantly for IPS e.max CAD endocrowns. Mode of failure 4 and 1 were the dominant failure modes for VITA ENAMIC and IPS e.max CAD respectively.","abstract_has_math":false,"creators":["Salah, Fadhela"],"institution":"Boston University","degree_name":"Master of Science in Design","degree_level":"masters","degree_discipline":"Endodontics","degree_department":null,"school":null,"contributors":[],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2017,"date_issued":"2017","date_published":"2017","updated_at":"2026-11-19T02:40:14Z","subjects":["Dentistry"],"languages":["en_US"],"rights":[],"rights_urls":[],"identifier_entries":[],"person_identifier_entries":[]},"links":{"outbound_url":"https://hdl.handle.net/2144/26403","outbound_label":"Handle","outbound_source":"dc:identifier.uri","record_url":"https://hdl.handle.net/2144/26403","record_label":"Repository record","record_kind":"handle","record_source":"dc:identifier.uri","download_url":null,"download_label":null,"download_source":null,"access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://open.bu.edu/oai/request?verb=GetRecord&metadataPrefix=dim&identifier=oai%3Aopen.bu.edu%3A2144%2F26403","prefix":"dim"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:creator","label":"Author","values":["Salah, Fadhela"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.accessioned","label":"Dc Date Accessioned","values":["2018-01-25T16:03:55Z"]},{"key":"dc:date.embargo","label":"Dc Date Embargo","values":["2019-10-27T00:00:00Z"]},{"key":"dc:date.issued","label":"Date","values":["2017"]},{"key":"dc:date.updated","label":"Dc Date Updated","values":["2017-10-27T19:20:46Z"]},{"key":"dc:type","label":"Dc Type","values":["Thesis/Dissertation"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Endodontics"]},{"key":"thesis:degree_level","label":"Degree Level","values":["masters"]},{"key":"thesis:degree_name","label":"Degree Name","values":["Master of Science in Design"]},{"key":"thesis:institution_name","label":"Thesis Institution Name","values":["Boston University"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["Dentistry"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.iso","label":"Language (ISO)","values":["en_US"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["https://hdl.handle.net/2144/26403"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["PURPOSE: To evaluate and compare the failure load of milled and bonded IPS e.max CAD and VITA ENAMIC endocrowns used in the restoration of endodontically molar teeth. MATERIALS AND METHODS: Typodont tooth # 30 was prepared with a central cavity to support the endocrowns. Fifty-eight epoxy resin dies were made from a physical impression of the prepared tooth and scanned with an intra oral scanner (Cerec AC, Dentsply-Sirona). The designed restorations were milled from two different materials: VITA ENAMIC (n=30) and IPS e.max CAD (n=28). Following adhesive cementation, half of the endocrowns of each group were subjected to thermal aging, each specimen was obliquely loaded until failure. Four groups were tested: group 1 (Enamic endocrowns without thermocycling), group 2 (Enamic endocrowns + thermocycling), group 3 (e.max endocrowns without thermocycling) and group 4 (e.max endocrowns + thermocycling). The fracture mode characteristics were identified. RESULTS: There was a significant difference in the mean failure loads between group 4 and group 3 at P ≤ 0.05; also between group 4 and group 1 at P ≤ 0.05. Group 1 had the highest value of 2301 N. A visual inspection of all tested endocrowns revealed four different failure modes; 1-Adhesive failure, 2-Cohesive failure, 3-Mixed failure and 4-Fracture Initiation In Crown Propagating Through Die. CONCLUSION: Thermocycling decreased the load to failure significantly for IPS e.max CAD endocrowns. Mode of failure 4 and 1 were the dominant failure modes for VITA ENAMIC and IPS e.max CAD respectively."]},{"key":"dc:title","label":"Title","values":["Failure load of CAD/CAM-generated all ceramic posterior endocrowns"]}]}],"canonical_facts":{"dc:creator":["Salah, Fadhela"],"dc:date.accessioned":["2018-01-25T16:03:55Z"],"dc:date.embargo":["2019-10-27T00:00:00Z"],"dc:date.issued":["2017"],"dc:date.updated":["2017-10-27T19:20:46Z"],"dc:description.abstract":["PURPOSE: To evaluate and compare the failure load of milled and bonded IPS e.max CAD and VITA ENAMIC endocrowns used in the restoration of endodontically molar teeth. MATERIALS AND METHODS: Typodont tooth # 30 was prepared with a central cavity to support the endocrowns. Fifty-eight epoxy resin dies were made from a physical impression of the prepared tooth and scanned with an intra oral scanner (Cerec AC, Dentsply-Sirona). The designed restorations were milled from two different materials: VITA ENAMIC (n=30) and IPS e.max CAD (n=28). Following adhesive cementation, half of the endocrowns of each group were subjected to thermal aging, each specimen was obliquely loaded until failure. Four groups were tested: group 1 (Enamic endocrowns without thermocycling), group 2 (Enamic endocrowns + thermocycling), group 3 (e.max endocrowns without thermocycling) and group 4 (e.max endocrowns + thermocycling). The fracture mode characteristics were identified. RESULTS: There was a significant difference in the mean failure loads between group 4 and group 3 at P ≤ 0.05; also between group 4 and group 1 at P ≤ 0.05. Group 1 had the highest value of 2301 N. A visual inspection of all tested endocrowns revealed four different failure modes; 1-Adhesive failure, 2-Cohesive failure, 3-Mixed failure and 4-Fracture Initiation In Crown Propagating Through Die. CONCLUSION: Thermocycling decreased the load to failure significantly for IPS e.max CAD endocrowns. Mode of failure 4 and 1 were the dominant failure modes for VITA ENAMIC and IPS e.max CAD respectively."],"dc:identifier.uri":["https://hdl.handle.net/2144/26403"],"dc:language.iso":["en_US"],"dc:subject":["Dentistry"],"dc:title":["Failure load of CAD/CAM-generated all ceramic posterior endocrowns"],"dc:type":["Thesis/Dissertation"],"thesis:degree_discipline":["Endodontics"],"thesis:degree_level":["masters"],"thesis:degree_name":["Master of Science in Design"],"thesis:institution_name":["Boston University"]},"updated_at":"2026-11-19T02:40:14Z"}