{"id":{"repo_id":"bu","oai_identifier":"oai:open.bu.edu:2144/37067"},"canonical_url":"https://search.ndltd.org/etd/bu/oai:open.bu.edu:2144/37067","repository":{"repo_id":"bu","name":"Boston University","base_url":"https://open.bu.edu/oai/request"},"display":{"title":"Effect of firing cycle and etching condition on resin cement tensile bond strength of Li2O-SiO2 system glass ceramics","abstract":"OBJECTIVE: To evaluate if the firing cycles and etching conditions have an effect on the tensile bonding strength (TBS) of IPS e.max-CAD and CeltraDUO. METHODS: Lithium-disilicate (IPS e.max-CAD) ceramic blocks and zirconia reinforced lithium-disilicate (CeltraDUO) were sectioned into rectangular tiles. The tiles were randomly assigned to various treatment groups and heat treated (1, 5, or 9 firing cycles) or (0, 1 or 5 firing cycle) respectively. e.max-CAD and CeltraDUO tiles were etched for different times (20,160, 300 seconds) and (20, 50, 80 seconds) respectively with hydrofluoric-acid gel (9.6% or 5%). Titanium-pins were sand-blasted on the flat end and cemented on the etched tiles using self-adhesive resin cement (TheraCem). A vertical load of 12N was placed for 40 minutes. All the cemented specimens were stored in incubator at 37°C for 48 hours. A tensile test was performed using a mechanical testing machine (Instron-5566A). The load at failure was recorded and the TBS was calculated. The same procedure was followed on another set of 18 e.max-CAD (fired for 5 firing cycles) and 21 CeltraDUO tiles (fired for 1 firing cycle). The same cementation procedure was followed and TBS was calculated. RESULTS: The TBS of both CeltraDUO and e.max-CAD was significantly affected by etching duration and firing cycles (p<0.001), but not significantly affected by etchant concentration (p=0.31). The highest load to failure was observed around 50 and 60 seconds of etching respectively. CONCLUSION: The etching time and firing cycle directly affect the TBS of both materials whereas the etchant concentration does not.","abstract_html":"OBJECTIVE: To evaluate if the firing cycles and etching conditions have an effect on the tensile bonding strength (TBS) of IPS e.max-CAD and CeltraDUO. METHODS: Lithium-disilicate (IPS e.max-CAD) ceramic blocks and zirconia reinforced lithium-disilicate (CeltraDUO) were sectioned into rectangular tiles. The tiles were randomly assigned to various treatment groups and heat treated (1, 5, or 9 firing cycles) or (0, 1 or 5 firing cycle) respectively. e.max-CAD and CeltraDUO tiles were etched for different times (20,160, 300 seconds) and (20, 50, 80 seconds) respectively with hydrofluoric-acid gel (9.6% or 5%). Titanium-pins were sand-blasted on the flat end and cemented on the etched tiles using self-adhesive resin cement (TheraCem). A vertical load of 12N was placed for 40 minutes. All the cemented specimens were stored in incubator at 37°C for 48 hours. A tensile test was performed using a mechanical testing machine (Instron-5566A). The load at failure was recorded and the TBS was calculated. The same procedure was followed on another set of 18 e.max-CAD (fired for 5 firing cycles) and 21 CeltraDUO tiles (fired for 1 firing cycle). The same cementation procedure was followed and TBS was calculated. RESULTS: The TBS of both CeltraDUO and e.max-CAD was significantly affected by etching duration and firing cycles (p&lt;0.001), but not significantly affected by etchant concentration (p=0.31). The highest load to failure was observed around 50 and 60 seconds of etching respectively. CONCLUSION: The etching time and firing cycle directly affect the TBS of both materials whereas the etchant concentration does not.","abstract_has_math":false,"creators":["Ahmed, Mohammed Moeeduddin"],"institution":"Boston University","degree_name":"Master of Science in Design","degree_level":"masters","degree_discipline":"Restorative Sciences & Biomaterials","degree_department":null,"school":null,"contributors":[],"advisors":["Nathanson, Dan","Fan, Yuwei"],"committee_chairs":[],"committee_members":[],"year":2019,"date_issued":"2019","date_published":"2019","updated_at":"2026-11-19T02:41:09Z","subjects":["Dentistry","CeltraDuo","E.max CAD","Tensile bond strength"],"languages":["en_US"],"rights":[],"rights_urls":[],"identifier_entries":[],"person_identifier_entries":[]},"links":{"outbound_url":"https://hdl.handle.net/2144/37067","outbound_label":"Handle","outbound_source":"dc:identifier.uri","record_url":"https://hdl.handle.net/2144/37067","record_label":"Repository record","record_kind":"handle","record_source":"dc:identifier.uri","download_url":null,"download_label":null,"download_source":null,"access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://open.bu.edu/oai/request?verb=GetRecord&metadataPrefix=dim&identifier=oai%3Aopen.bu.edu%3A2144%2F37067","prefix":"dim"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.advisor","label":"Advisor","values":["Nathanson, Dan","Fan, Yuwei"]},{"key":"dc:creator","label":"Author","values":["Ahmed, Mohammed Moeeduddin"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.accessioned","label":"Dc Date Accessioned","values":["2019-08-12T15:42:35Z"]},{"key":"dc:date.embargo","label":"Dc Date Embargo","values":["2021-07-15T00:00:00Z"]},{"key":"dc:date.issued","label":"Date","values":["2019"]},{"key":"dc:date.updated","label":"Dc Date Updated","values":["2019-07-15T19:19:42Z"]},{"key":"dc:type","label":"Dc Type","values":["Thesis/Dissertation"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Restorative Sciences & Biomaterials"]},{"key":"thesis:degree_level","label":"Degree Level","values":["masters"]},{"key":"thesis:degree_name","label":"Degree Name","values":["Master of Science in Design"]},{"key":"thesis:institution_name","label":"Thesis Institution Name","values":["Boston University"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["Dentistry","CeltraDuo","E.max CAD","Tensile bond strength"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.iso","label":"Language (ISO)","values":["en_US"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["https://hdl.handle.net/2144/37067"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["OBJECTIVE: To evaluate if the firing cycles and etching conditions have an effect on the tensile bonding strength (TBS) of IPS e.max-CAD and CeltraDUO. METHODS: Lithium-disilicate (IPS e.max-CAD) ceramic blocks and zirconia reinforced lithium-disilicate (CeltraDUO) were sectioned into rectangular tiles. The tiles were randomly assigned to various treatment groups and heat treated (1, 5, or 9 firing cycles) or (0, 1 or 5 firing cycle) respectively. e.max-CAD and CeltraDUO tiles were etched for different times (20,160, 300 seconds) and (20, 50, 80 seconds) respectively with hydrofluoric-acid gel (9.6% or 5%). Titanium-pins were sand-blasted on the flat end and cemented on the etched tiles using self-adhesive resin cement (TheraCem). A vertical load of 12N was placed for 40 minutes. All the cemented specimens were stored in incubator at 37°C for 48 hours. A tensile test was performed using a mechanical testing machine (Instron-5566A). The load at failure was recorded and the TBS was calculated. The same procedure was followed on another set of 18 e.max-CAD (fired for 5 firing cycles) and 21 CeltraDUO tiles (fired for 1 firing cycle). The same cementation procedure was followed and TBS was calculated. RESULTS: The TBS of both CeltraDUO and e.max-CAD was significantly affected by etching duration and firing cycles (p<0.001), but not significantly affected by etchant concentration (p=0.31). The highest load to failure was observed around 50 and 60 seconds of etching respectively. CONCLUSION: The etching time and firing cycle directly affect the TBS of both materials whereas the etchant concentration does not."]},{"key":"dc:title","label":"Title","values":["Effect of firing cycle and etching condition on resin cement tensile bond strength of Li2O-SiO2 system glass ceramics"]}]}],"canonical_facts":{"dc:contributor.advisor":["Nathanson, Dan","Fan, Yuwei"],"dc:creator":["Ahmed, Mohammed Moeeduddin"],"dc:date.accessioned":["2019-08-12T15:42:35Z"],"dc:date.embargo":["2021-07-15T00:00:00Z"],"dc:date.issued":["2019"],"dc:date.updated":["2019-07-15T19:19:42Z"],"dc:description.abstract":["OBJECTIVE: To evaluate if the firing cycles and etching conditions have an effect on the tensile bonding strength (TBS) of IPS e.max-CAD and CeltraDUO. METHODS: Lithium-disilicate (IPS e.max-CAD) ceramic blocks and zirconia reinforced lithium-disilicate (CeltraDUO) were sectioned into rectangular tiles. The tiles were randomly assigned to various treatment groups and heat treated (1, 5, or 9 firing cycles) or (0, 1 or 5 firing cycle) respectively. e.max-CAD and CeltraDUO tiles were etched for different times (20,160, 300 seconds) and (20, 50, 80 seconds) respectively with hydrofluoric-acid gel (9.6% or 5%). Titanium-pins were sand-blasted on the flat end and cemented on the etched tiles using self-adhesive resin cement (TheraCem). A vertical load of 12N was placed for 40 minutes. All the cemented specimens were stored in incubator at 37°C for 48 hours. A tensile test was performed using a mechanical testing machine (Instron-5566A). The load at failure was recorded and the TBS was calculated. The same procedure was followed on another set of 18 e.max-CAD (fired for 5 firing cycles) and 21 CeltraDUO tiles (fired for 1 firing cycle). The same cementation procedure was followed and TBS was calculated. RESULTS: The TBS of both CeltraDUO and e.max-CAD was significantly affected by etching duration and firing cycles (p<0.001), but not significantly affected by etchant concentration (p=0.31). The highest load to failure was observed around 50 and 60 seconds of etching respectively. CONCLUSION: The etching time and firing cycle directly affect the TBS of both materials whereas the etchant concentration does not."],"dc:identifier.uri":["https://hdl.handle.net/2144/37067"],"dc:language.iso":["en_US"],"dc:subject":["Dentistry","CeltraDuo","E.max CAD","Tensile bond strength"],"dc:title":["Effect of firing cycle and etching condition on resin cement tensile bond strength of Li2O-SiO2 system glass ceramics"],"dc:type":["Thesis/Dissertation"],"thesis:degree_discipline":["Restorative Sciences & Biomaterials"],"thesis:degree_level":["masters"],"thesis:degree_name":["Master of Science in Design"],"thesis:institution_name":["Boston University"]},"updated_at":"2026-11-19T02:41:09Z"}