{"id":{"repo_id":"bu","oai_identifier":"oai:open.bu.edu:2144/48893"},"canonical_url":"https://search.ndltd.org/etd/bu/oai:open.bu.edu:2144/48893","repository":{"repo_id":"bu","name":"Boston University","base_url":"https://open.bu.edu/oai/request"},"display":{"title":"Residual stress hole drilling of elastic anisotropic commercially pure titanium","abstract":"Residual stress measurement methods have commonly been used to characterize states of stress in various elastic isotropic materials. In order to investigate the effects of elastic anisotropy on residual stress measurements, commercially pure grade 2 titanium (CP Ti Gr 2) was selected to study a strong texture, or preferred grain orientation. Warm rolled and air-cooled CP titanium is well known to have a texture from the factory. This texture and resulting elastic anisotropy were confirmed using two material characterization methods, resonant ultrasound spectroscopy (RUS) and electron backscatter diffraction (EBSD). The texture was further developed using a rolling mill to cold roll the titanium. A vacuum furnace set to a temperature of 550 C for one hour was used to stress relieve the titanium without reducing the texture. RUS and EBSD methods were used again to confirm the texture achieved by cold rolling. Well-characterized residual stresses were introduced with a shrink-fit ring and plug. The residual stress hole drilling method was used to characterize stresses in the rolling and transverse directions of the ring and plug assemblies. Stress profiles from hole drilling indicated some possible elastic anisotropic effects in two assemblies and are presented. However, more assemblies are needed to confirm the results. A stress determination technique with higher sensitivity may be necessary to substantiate assembly stress profile results.","abstract_html":"Residual stress measurement methods have commonly been used to characterize states of stress in various elastic isotropic materials. In order to investigate the effects of elastic anisotropy on residual stress measurements, commercially pure grade 2 titanium (CP Ti Gr 2) was selected to study a strong texture, or preferred grain orientation. Warm rolled and air-cooled CP titanium is well known to have a texture from the factory. This texture and resulting elastic anisotropy were confirmed using two material characterization methods, resonant ultrasound spectroscopy (RUS) and electron backscatter diffraction (EBSD). The texture was further developed using a rolling mill to cold roll the titanium. A vacuum furnace set to a temperature of 550 C for one hour was used to stress relieve the titanium without reducing the texture. RUS and EBSD methods were used again to confirm the texture achieved by cold rolling. Well-characterized residual stresses were introduced with a shrink-fit ring and plug. The residual stress hole drilling method was used to characterize stresses in the rolling and transverse directions of the ring and plug assemblies. Stress profiles from hole drilling indicated some possible elastic anisotropic effects in two assemblies and are presented. However, more assemblies are needed to confirm the results. A stress determination technique with higher sensitivity may be necessary to substantiate assembly stress profile results.","abstract_has_math":false,"creators":["Sanchez Archuleta, Zachary J."],"institution":"Boston University","degree_name":"Master of Science","degree_level":"masters","degree_discipline":"Mechanical Engineering","degree_department":null,"school":null,"contributors":[],"advisors":["Holmes, Douglas P."],"committee_chairs":[],"committee_members":[],"year":2024,"date_issued":"2024","date_published":"2024","updated_at":"2026-11-18T19:48:56Z","subjects":["Engineering","Cold rolling","Electron backscatter diffraction","Hole drilling","Residual stress","Resonant ultrasound spectroscopy","Texture"],"languages":["en_US"],"rights":[],"rights_urls":[],"identifier_entries":[],"person_identifier_entries":[{"key":"dc:identifier.orcid","label":"ORCID","values":["0009-0002-7250-4788"],"render_values":[{"text":"0009-0002-7250-4788","href":"https://orcid.org/0009-0002-7250-4788","code":true}]}]},"links":{"outbound_url":"https://hdl.handle.net/2144/48893","outbound_label":"Handle","outbound_source":"dc:identifier.uri","record_url":"https://hdl.handle.net/2144/48893","record_label":"Repository record","record_kind":"handle","record_source":"dc:identifier.uri","download_url":null,"download_label":null,"download_source":null,"access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://open.bu.edu/oai/request?verb=GetRecord&metadataPrefix=dim&identifier=oai%3Aopen.bu.edu%3A2144%2F48893","prefix":"dim"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.advisor","label":"Advisor","values":["Holmes, Douglas P."]},{"key":"dc:creator","label":"Author","values":["Sanchez Archuleta, Zachary J."]},{"key":"dc:identifier.orcid","label":"ORCID","values":["0009-0002-7250-4788"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.accessioned","label":"Dc Date Accessioned","values":["2024-05-29T15:42:07Z"]},{"key":"dc:date.available","label":"Dc Date Available","values":["2024-05-29T15:42:07Z"]},{"key":"dc:date.issued","label":"Date","values":["2024"]},{"key":"dc:date.updated","label":"Dc Date Updated","values":["2024-05-28T22:12:36Z"]},{"key":"dc:type","label":"Dc Type","values":["Thesis/Dissertation"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Mechanical Engineering"]},{"key":"thesis:degree_level","label":"Degree Level","values":["masters"]},{"key":"thesis:degree_name","label":"Degree Name","values":["Master of Science"]},{"key":"thesis:institution_name","label":"Thesis Institution Name","values":["Boston University"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["Engineering","Cold rolling","Electron backscatter diffraction","Hole drilling","Residual stress","Resonant ultrasound spectroscopy","Texture"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.iso","label":"Language (ISO)","values":["en_US"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["https://hdl.handle.net/2144/48893"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["Residual stress measurement methods have commonly been used to characterize states of stress in various elastic isotropic materials. In order to investigate the effects of elastic anisotropy on residual stress measurements, commercially pure grade 2 titanium (CP Ti Gr 2) was selected to study a strong texture, or preferred grain orientation. Warm rolled and air-cooled CP titanium is well known to have a texture from the factory. This texture and resulting elastic anisotropy were confirmed using two material characterization methods, resonant ultrasound spectroscopy (RUS) and electron backscatter diffraction (EBSD). The texture was further developed using a rolling mill to cold roll the titanium. A vacuum furnace set to a temperature of 550 C for one hour was used to stress relieve the titanium without reducing the texture. RUS and EBSD methods were used again to confirm the texture achieved by cold rolling. Well-characterized residual stresses were introduced with a shrink-fit ring and plug. The residual stress hole drilling method was used to characterize stresses in the rolling and transverse directions of the ring and plug assemblies. Stress profiles from hole drilling indicated some possible elastic anisotropic effects in two assemblies and are presented. However, more assemblies are needed to confirm the results. A stress determination technique with higher sensitivity may be necessary to substantiate assembly stress profile results."]},{"key":"dc:title","label":"Title","values":["Residual stress hole drilling of elastic anisotropic commercially pure titanium"]}]}],"canonical_facts":{"dc:contributor.advisor":["Holmes, Douglas P."],"dc:creator":["Sanchez Archuleta, Zachary J."],"dc:date.accessioned":["2024-05-29T15:42:07Z"],"dc:date.available":["2024-05-29T15:42:07Z"],"dc:date.issued":["2024"],"dc:date.updated":["2024-05-28T22:12:36Z"],"dc:description.abstract":["Residual stress measurement methods have commonly been used to characterize states of stress in various elastic isotropic materials. In order to investigate the effects of elastic anisotropy on residual stress measurements, commercially pure grade 2 titanium (CP Ti Gr 2) was selected to study a strong texture, or preferred grain orientation. Warm rolled and air-cooled CP titanium is well known to have a texture from the factory. This texture and resulting elastic anisotropy were confirmed using two material characterization methods, resonant ultrasound spectroscopy (RUS) and electron backscatter diffraction (EBSD). The texture was further developed using a rolling mill to cold roll the titanium. A vacuum furnace set to a temperature of 550 C for one hour was used to stress relieve the titanium without reducing the texture. RUS and EBSD methods were used again to confirm the texture achieved by cold rolling. Well-characterized residual stresses were introduced with a shrink-fit ring and plug. The residual stress hole drilling method was used to characterize stresses in the rolling and transverse directions of the ring and plug assemblies. Stress profiles from hole drilling indicated some possible elastic anisotropic effects in two assemblies and are presented. However, more assemblies are needed to confirm the results. A stress determination technique with higher sensitivity may be necessary to substantiate assembly stress profile results."],"dc:identifier.orcid":["0009-0002-7250-4788"],"dc:identifier.uri":["https://hdl.handle.net/2144/48893"],"dc:language.iso":["en_US"],"dc:subject":["Engineering","Cold rolling","Electron backscatter diffraction","Hole drilling","Residual stress","Resonant ultrasound spectroscopy","Texture"],"dc:title":["Residual stress hole drilling of elastic anisotropic commercially pure titanium"],"dc:type":["Thesis/Dissertation"],"thesis:degree_discipline":["Mechanical Engineering"],"thesis:degree_level":["masters"],"thesis:degree_name":["Master of Science"],"thesis:institution_name":["Boston University"]},"updated_at":"2026-11-18T19:48:56Z"}