{"id":{"repo_id":"bu","oai_identifier":"oai:open.bu.edu:2144/53320"},"canonical_url":"https://search.ndltd.org/etd/bu/oai:open.bu.edu:2144/53320","repository":{"repo_id":"bu","name":"Boston University","base_url":"https://open.bu.edu/oai/request"},"display":{"title":"Biomechanics of short implants in the posterior mandible: titanium versus one- and two-piece zirconia implants","abstract":"The present study investigated the biomechanical behavior of 1-piece and 2-piece zirconia implant systems in comparison with a conventional titanium implant configuration in the posterior mandible, with particular emphasis on implant–abutment interface mechanics, peri-implant bone loading, and stress propagation toward the inferior alveolar nerve (IAN). 3D finite element models were developed using a previously validated dentate mandibular model combined with high fidelity geometries of commercially available implant systems (obtained via μCT). Interface contact areas and internal gap volumes were quantified prior to biomechanical analysis, while progressive quasi-static occlusal loading was applied under physiological contact conditions. Stress distributions within the restorative components, surrounding bone, and IAN were evaluated using von Mises and maximum principal stress criteria according to the mechanical behavior of each material. The 2-piece zirconia system demonstrated approximately 70% lower implant–abutment contact area together with a 2.8-fold greater proportion of interfacial discontinuity compared with the titanium configuration, resulting in the highest internal stress concentrations, particularly at the implant–abutment interface. In contrast, the 1-piece zirconia configuration exhibited the most homogeneous stress distribution and the closest biomechanical response to the healthy dentition model within the peri-implant cancellous bone. Although all implant systems restored physiological bone-loading patterns to clinically acceptable levels, implant-supported restorations transmitted substantially greater residual stresses toward the IAN compared with natural dentition, with continuous elevated stress observed over clinically relevant implant-to-nerve distances. Within the limitations of the present finite element analysis, elimination of inter-component gaps through 1-piece zirconia configurations resulted in more favorable stress transfer behavior and reduced stress accumulation compared with 2-piece zirconia assemblies.","abstract_html":"The present study investigated the biomechanical behavior of 1-piece and 2-piece zirconia implant systems in comparison with a conventional titanium implant configuration in the posterior mandible, with particular emphasis on implant–abutment interface mechanics, peri-implant bone loading, and stress propagation toward the inferior alveolar nerve (IAN). 3D finite element models were developed using a previously validated dentate mandibular model combined with high fidelity geometries of commercially available implant systems (obtained via μCT). Interface contact areas and internal gap volumes were quantified prior to biomechanical analysis, while progressive quasi-static occlusal loading was applied under physiological contact conditions. Stress distributions within the restorative components, surrounding bone, and IAN were evaluated using von Mises and maximum principal stress criteria according to the mechanical behavior of each material. The 2-piece zirconia system demonstrated approximately 70% lower implant–abutment contact area together with a 2.8-fold greater proportion of interfacial discontinuity compared with the titanium configuration, resulting in the highest internal stress concentrations, particularly at the implant–abutment interface. In contrast, the 1-piece zirconia configuration exhibited the most homogeneous stress distribution and the closest biomechanical response to the healthy dentition model within the peri-implant cancellous bone. Although all implant systems restored physiological bone-loading patterns to clinically acceptable levels, implant-supported restorations transmitted substantially greater residual stresses toward the IAN compared with natural dentition, with continuous elevated stress observed over clinically relevant implant-to-nerve distances. Within the limitations of the present finite element analysis, elimination of inter-component gaps through 1-piece zirconia configurations resulted in more favorable stress transfer behavior and reduced stress accumulation compared with 2-piece zirconia assemblies.","abstract_has_math":false,"creators":["Alamro, Nawaf"],"institution":"Boston University","degree_name":"Master of Science in Design","degree_level":"masters","degree_discipline":"Restorative Sciences & Biomaterials","degree_department":null,"school":null,"contributors":[],"advisors":["Tsouknidas, Alexandros","Michalakis, Konstantinos"],"committee_chairs":[],"committee_members":[],"year":2026,"date_issued":"2026","date_published":"2026","updated_at":"2026-11-18T19:53:16Z","subjects":["Dentistry","Biomechanics","Implants","Inferior alveolar nerve","Titanium","Zirconia"],"languages":["en_US"],"rights":["Attribution-NonCommercial-NoDerivatives 4.0 International"],"rights_urls":["http://creativecommons.org/licenses/by-nc-nd/4.0/"],"identifier_entries":[],"person_identifier_entries":[{"key":"dc:identifier.orcid","label":"ORCID","values":["0000-0001-8567-9574"],"render_values":[{"text":"0000-0001-8567-9574","href":"https://orcid.org/0000-0001-8567-9574","code":true}]}]},"links":{"outbound_url":"https://hdl.handle.net/2144/53320","outbound_label":"Handle","outbound_source":"dc:identifier.uri","record_url":"https://hdl.handle.net/2144/53320","record_label":"Repository record","record_kind":"handle","record_source":"dc:identifier.uri","download_url":null,"download_label":null,"download_source":null,"access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://open.bu.edu/oai/request?verb=GetRecord&metadataPrefix=dim&identifier=oai%3Aopen.bu.edu%3A2144%2F53320","prefix":"dim"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.advisor","label":"Advisor","values":["Tsouknidas, Alexandros","Michalakis, Konstantinos"]},{"key":"dc:creator","label":"Author","values":["Alamro, Nawaf"]},{"key":"dc:identifier.orcid","label":"ORCID","values":["0000-0001-8567-9574"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.accessioned","label":"Dc Date Accessioned","values":["2026-07-14T18:26:42Z"]},{"key":"dc:date.available","label":"Dc Date Available","values":["2026-07-14T18:26:42Z"]},{"key":"dc:date.issued","label":"Date","values":["2026"]},{"key":"dc:date.updated","label":"Dc Date Updated","values":["2026-07-14T16:15:37Z"]},{"key":"dc:type","label":"Dc Type","values":["Thesis/Dissertation"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Restorative Sciences & Biomaterials"]},{"key":"thesis:degree_level","label":"Degree Level","values":["masters"]},{"key":"thesis:degree_name","label":"Degree Name","values":["Master of Science in Design"]},{"key":"thesis:institution_name","label":"Thesis Institution Name","values":["Boston University"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["Dentistry","Biomechanics","Implants","Inferior alveolar nerve","Titanium","Zirconia"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.iso","label":"Language (ISO)","values":["en_US"]},{"key":"dc:rights","label":"Dc Rights","values":["Attribution-NonCommercial-NoDerivatives 4.0 International"]},{"key":"dc:rights.uri","label":"Rights URI","values":["http://creativecommons.org/licenses/by-nc-nd/4.0/"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["https://hdl.handle.net/2144/53320"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description","label":"Description","values":["2026"]},{"key":"dc:description.abstract","label":"Abstract","values":["The present study investigated the biomechanical behavior of 1-piece and 2-piece zirconia implant systems in comparison with a conventional titanium implant configuration in the posterior mandible, with particular emphasis on implant–abutment interface mechanics, peri-implant bone loading, and stress propagation toward the inferior alveolar nerve (IAN). 3D finite element models were developed using a previously validated dentate mandibular model combined with high fidelity geometries of commercially available implant systems (obtained via μCT). Interface contact areas and internal gap volumes were quantified prior to biomechanical analysis, while progressive quasi-static occlusal loading was applied under physiological contact conditions. Stress distributions within the restorative components, surrounding bone, and IAN were evaluated using von Mises and maximum principal stress criteria according to the mechanical behavior of each material. The 2-piece zirconia system demonstrated approximately 70% lower implant–abutment contact area together with a 2.8-fold greater proportion of interfacial discontinuity compared with the titanium configuration, resulting in the highest internal stress concentrations, particularly at the implant–abutment interface. In contrast, the 1-piece zirconia configuration exhibited the most homogeneous stress distribution and the closest biomechanical response to the healthy dentition model within the peri-implant cancellous bone. Although all implant systems restored physiological bone-loading patterns to clinically acceptable levels, implant-supported restorations transmitted substantially greater residual stresses toward the IAN compared with natural dentition, with continuous elevated stress observed over clinically relevant implant-to-nerve distances. Within the limitations of the present finite element analysis, elimination of inter-component gaps through 1-piece zirconia configurations resulted in more favorable stress transfer behavior and reduced stress accumulation compared with 2-piece zirconia assemblies."]},{"key":"dc:title","label":"Title","values":["Biomechanics of short implants in the posterior mandible: titanium versus one- and two-piece zirconia implants"]}]}],"canonical_facts":{"dc:contributor.advisor":["Tsouknidas, Alexandros","Michalakis, Konstantinos"],"dc:creator":["Alamro, Nawaf"],"dc:date.accessioned":["2026-07-14T18:26:42Z"],"dc:date.available":["2026-07-14T18:26:42Z"],"dc:date.issued":["2026"],"dc:date.updated":["2026-07-14T16:15:37Z"],"dc:description":["2026"],"dc:description.abstract":["The present study investigated the biomechanical behavior of 1-piece and 2-piece zirconia implant systems in comparison with a conventional titanium implant configuration in the posterior mandible, with particular emphasis on implant–abutment interface mechanics, peri-implant bone loading, and stress propagation toward the inferior alveolar nerve (IAN). 3D finite element models were developed using a previously validated dentate mandibular model combined with high fidelity geometries of commercially available implant systems (obtained via μCT). Interface contact areas and internal gap volumes were quantified prior to biomechanical analysis, while progressive quasi-static occlusal loading was applied under physiological contact conditions. Stress distributions within the restorative components, surrounding bone, and IAN were evaluated using von Mises and maximum principal stress criteria according to the mechanical behavior of each material. The 2-piece zirconia system demonstrated approximately 70% lower implant–abutment contact area together with a 2.8-fold greater proportion of interfacial discontinuity compared with the titanium configuration, resulting in the highest internal stress concentrations, particularly at the implant–abutment interface. In contrast, the 1-piece zirconia configuration exhibited the most homogeneous stress distribution and the closest biomechanical response to the healthy dentition model within the peri-implant cancellous bone. Although all implant systems restored physiological bone-loading patterns to clinically acceptable levels, implant-supported restorations transmitted substantially greater residual stresses toward the IAN compared with natural dentition, with continuous elevated stress observed over clinically relevant implant-to-nerve distances. Within the limitations of the present finite element analysis, elimination of inter-component gaps through 1-piece zirconia configurations resulted in more favorable stress transfer behavior and reduced stress accumulation compared with 2-piece zirconia assemblies."],"dc:identifier.orcid":["0000-0001-8567-9574"],"dc:identifier.uri":["https://hdl.handle.net/2144/53320"],"dc:language.iso":["en_US"],"dc:rights":["Attribution-NonCommercial-NoDerivatives 4.0 International"],"dc:rights.uri":["http://creativecommons.org/licenses/by-nc-nd/4.0/"],"dc:subject":["Dentistry","Biomechanics","Implants","Inferior alveolar nerve","Titanium","Zirconia"],"dc:title":["Biomechanics of short implants in the posterior mandible: titanium versus one- and two-piece zirconia implants"],"dc:type":["Thesis/Dissertation"],"thesis:degree_discipline":["Restorative Sciences & Biomaterials"],"thesis:degree_level":["masters"],"thesis:degree_name":["Master of Science in Design"],"thesis:institution_name":["Boston University"]},"updated_at":"2026-11-18T19:53:16Z"}