{"id":{"repo_id":"calpoly","oai_identifier":"oai:digitalcommons.calpoly.edu:theses-2390"},"canonical_url":"https://search.ndltd.org/etd/calpoly/oai:digitalcommons.calpoly.edu:theses-2390","repository":{"repo_id":"calpoly","name":"Cal Poly","base_url":"https://digitalcommons.calpoly.edu/do/oai/"},"display":{"title":"Experimental Study of Delay of Separation on a NACA 0015 Wing Model Using Synthetic Jet Actuators","abstract":"An experimental study has been conducted in the Cal Poly ME 0.61 m x 0.61 m (2 ft x 2 ft) subsonic wind tunnel of the effect of a piezoelectric synthetic jet actuator at 10% chord on a NACA 0015 finite wing up to α = 20° at ReC = 100,000. It was observed that the actuation is able to delay the separation over the NACA 0015 finite wing model up to α = 20°. For all the Cμ values tested, the synthetic jet excitation is effective at F+ = 1, 2.8, and 13.9 at α = 16°, but only at F+ = 13.9 at α = 20°. At α = 16°, the Cp suction peak under the synthetic jet excitation at F+ = 1, 2.8, and 13.9 all gradually reduce from Cp ≅ -4 at in the inboard area to about Cp ≅ -3 near the wingtip, about 25% reduction. The situation is similar for F+ = 13.9 at α = 20° except at 2y/b = 0.30, the most inboard testing position, where the excitation shows almost no effect. The surprising result is that slit is not the only actuation influencing the flow. For F+ from 1 to 2.8, the synthetic jet is indeed the most effective configuration and is successful in causing flow attachment as seen in previous experiments. For F+= 13.9, however, the flow is successfully attached with the model vibration caused by the actuators alone without the slit at 16°. At 20°, this configuration was not successful in delaying separation.","abstract_html":"An experimental study has been conducted in the Cal Poly ME 0.61 m x 0.61 m (2 ft x 2 ft) subsonic wind tunnel of the effect of a piezoelectric synthetic jet actuator at 10% chord on a NACA 0015 finite wing up to α = 20° at ReC = 100,000. It was observed that the actuation is able to delay the separation over the NACA 0015 finite wing model up to α = 20°. For all the Cμ values tested, the synthetic jet excitation is effective at F+ = 1, 2.8, and 13.9 at α = 16°, but only at F+ = 13.9 at α = 20°. At α = 16°, the Cp suction peak under the synthetic jet excitation at F+ = 1, 2.8, and 13.9 all gradually reduce from Cp ≅ -4 at in the inboard area to about Cp ≅ -3 near the wingtip, about 25% reduction. The situation is similar for F+ = 13.9 at α = 20° except at 2y/b = 0.30, the most inboard testing position, where the excitation shows almost no effect. The surprising result is that slit is not the only actuation influencing the flow. For F+ from 1 to 2.8, the synthetic jet is indeed the most effective configuration and is successful in causing flow attachment as seen in previous experiments. For F+= 13.9, however, the flow is successfully attached with the model vibration caused by the actuators alone without the slit at 16°. At 20°, this configuration was not successful in delaying separation.","abstract_has_math":false,"creators":["L'esperance, Alan M"],"institution":null,"degree_name":"MS in Aerospace Engineering","degree_level":null,"degree_discipline":"Aerospace Engineering","degree_department":null,"school":null,"contributors":["Jin Tso"],"advisors":[],"committee_chairs":[],"committee_members":[],"year":null,"date_issued":"","date_published":null,"updated_at":"2026-11-19T07:11:19Z","subjects":[],"languages":[],"rights":[],"rights_urls":[],"identifier_entries":[{"key":"dc:identifier","label":"Identifier","values":["10.15368/theses.2014.139"],"render_values":[{"text":"10.15368/theses.2014.139","href":"https://doi.org/10.15368/theses.2014.139","code":true}]}],"person_identifier_entries":[]},"links":{"outbound_url":"https://digitalcommons.calpoly.edu/theses/1287","outbound_label":"Repository record","outbound_source":"dc:identifier","record_url":"https://digitalcommons.calpoly.edu/theses/1287","record_label":"Repository record","record_kind":"record","record_source":"dc:identifier","download_url":null,"download_label":null,"download_source":null,"access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://digitalcommons.calpoly.edu/do/oai/?verb=GetRecord&metadataPrefix=oai_etdms&identifier=oai%3Adigitalcommons.calpoly.edu%3Atheses-2390","prefix":"oai_etdms"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor","label":"Contributor","values":["Jin Tso"]},{"key":"dc:creator","label":"Author","values":["L'esperance, Alan M"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.available","label":"Dc Date Available","values":["2014-08-21T07:00:00Z"]},{"key":"dc:date.created","label":"Dc Date Created","values":["2014-08-01T07:00:00Z"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Aerospace Engineering"]},{"key":"thesis:degree_name","label":"Degree Name","values":["MS in Aerospace Engineering"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier","label":"Identifier","values":["https://digitalcommons.calpoly.edu/theses/1287","10.15368/theses.2014.139"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["An experimental study has been conducted in the Cal Poly ME 0.61 m x 0.61 m (2 ft x 2 ft) subsonic wind tunnel of the effect of a piezoelectric synthetic jet actuator at 10% chord on a NACA 0015 finite wing up to α = 20° at ReC = 100,000. It was observed that the actuation is able to delay the separation over the NACA 0015 finite wing model up to α = 20°. For all the Cμ values tested, the synthetic jet excitation is effective at F+ = 1, 2.8, and 13.9 at α = 16°, but only at F+ = 13.9 at α = 20°. At α = 16°, the Cp suction peak under the synthetic jet excitation at F+ = 1, 2.8, and 13.9 all gradually reduce from Cp ≅ -4 at in the inboard area to about Cp ≅ -3 near the wingtip, about 25% reduction. The situation is similar for F+ = 13.9 at α = 20° except at 2y/b = 0.30, the most inboard testing position, where the excitation shows almost no effect. The surprising result is that slit is not the only actuation influencing the flow. For F+ from 1 to 2.8, the synthetic jet is indeed the most effective configuration and is successful in causing flow attachment as seen in previous experiments. For F+= 13.9, however, the flow is successfully attached with the model vibration caused by the actuators alone without the slit at 16°. At 20°, this configuration was not successful in delaying separation."]},{"key":"dc:title","label":"Title","values":["Experimental Study of Delay of Separation on a NACA 0015 Wing Model Using Synthetic Jet Actuators"]}]}],"canonical_facts":{"dc:contributor":["Jin Tso"],"dc:creator":["L'esperance, Alan M"],"dc:date.available":["2014-08-21T07:00:00Z"],"dc:date.created":["2014-08-01T07:00:00Z"],"dc:description.abstract":["An experimental study has been conducted in the Cal Poly ME 0.61 m x 0.61 m (2 ft x 2 ft) subsonic wind tunnel of the effect of a piezoelectric synthetic jet actuator at 10% chord on a NACA 0015 finite wing up to α = 20° at ReC = 100,000. It was observed that the actuation is able to delay the separation over the NACA 0015 finite wing model up to α = 20°. For all the Cμ values tested, the synthetic jet excitation is effective at F+ = 1, 2.8, and 13.9 at α = 16°, but only at F+ = 13.9 at α = 20°. At α = 16°, the Cp suction peak under the synthetic jet excitation at F+ = 1, 2.8, and 13.9 all gradually reduce from Cp ≅ -4 at in the inboard area to about Cp ≅ -3 near the wingtip, about 25% reduction. The situation is similar for F+ = 13.9 at α = 20° except at 2y/b = 0.30, the most inboard testing position, where the excitation shows almost no effect. The surprising result is that slit is not the only actuation influencing the flow. For F+ from 1 to 2.8, the synthetic jet is indeed the most effective configuration and is successful in causing flow attachment as seen in previous experiments. For F+= 13.9, however, the flow is successfully attached with the model vibration caused by the actuators alone without the slit at 16°. At 20°, this configuration was not successful in delaying separation."],"dc:identifier":["https://digitalcommons.calpoly.edu/theses/1287","10.15368/theses.2014.139"],"dc:title":["Experimental Study of Delay of Separation on a NACA 0015 Wing Model Using Synthetic Jet Actuators"],"thesis:degree_discipline":["Aerospace Engineering"],"thesis:degree_name":["MS in Aerospace Engineering"]},"updated_at":"2026-11-19T07:11:19Z"}