{"id":{"repo_id":"calpoly","oai_identifier":"oai:digitalcommons.calpoly.edu:theses-3422"},"canonical_url":"https://search.ndltd.org/etd/calpoly/oai:digitalcommons.calpoly.edu:theses-3422","repository":{"repo_id":"calpoly","name":"Cal Poly","base_url":"https://digitalcommons.calpoly.edu/do/oai/"},"display":{"title":"Study of Paper Microbial Fuel Cells for Use in On-Site Wastewater Testing","abstract":"This study demonstrated a technique for fabricating simple, low-cost Paper Microbial fuel cells (PMFC’s) in the model of a previous study to, for the first time, produce voltage from wastewater effluent. The PMFC’s were created by stacking and gluing the main components of an MFC together: reservoir layer; anode; cation exchange membrane (CEM); air cathode. A wax printer was used to create the hydrophobic borders of the PMFC’s on filter paper, and graphite paint was applied to the paper to create the anode. The CEM’s considered were filter paper, wax, and Nafion, with Nafion being the most efficient. Finally, the air cathode was made using carbon veil, and leads (or resistors) were placed in both anode and cathode layers for voltage measurement. Confirming previous studies’ results, the PMFC’s had a rapid startup time and sustained voltage for at least 10 minutes. The study also found that: Nafion was the best CEM; painting one side of the anode had the highest voltage; higher surface area increased voltage; increased time from sampling decreased voltage. Thus, this study proved that the small, low-cost PMFC devices described in previous studies can produce a voltage using primary effluent, and showed that the surface area of the PMFC could be optimized to increase voltage.","abstract_html":"This study demonstrated a technique for fabricating simple, low-cost Paper Microbial fuel cells (PMFC’s) in the model of a previous study to, for the first time, produce voltage from wastewater effluent. The PMFC’s were created by stacking and gluing the main components of an MFC together: reservoir layer; anode; cation exchange membrane (CEM); air cathode. A wax printer was used to create the hydrophobic borders of the PMFC’s on filter paper, and graphite paint was applied to the paper to create the anode. The CEM’s considered were filter paper, wax, and Nafion, with Nafion being the most efficient. Finally, the air cathode was made using carbon veil, and leads (or resistors) were placed in both anode and cathode layers for voltage measurement. Confirming previous studies’ results, the PMFC’s had a rapid startup time and sustained voltage for at least 10 minutes. The study also found that: Nafion was the best CEM; painting one side of the anode had the highest voltage; higher surface area increased voltage; increased time from sampling decreased voltage. Thus, this study proved that the small, low-cost PMFC devices described in previous studies can produce a voltage using primary effluent, and showed that the surface area of the PMFC could be optimized to increase voltage.","abstract_has_math":false,"creators":["Tolmasoff, William A"],"institution":null,"degree_name":"MS in Biomedical Engineering","degree_level":null,"degree_discipline":"Biomedical and General Engineering","degree_department":null,"school":null,"contributors":["David Clague"],"advisors":[],"committee_chairs":[],"committee_members":[],"year":null,"date_issued":"","date_published":null,"updated_at":"2026-11-19T07:11:08Z","subjects":["Paper Microbial Fuel Cells","Wastewater Quality Testing","Developing Nations","Biochemistry, Biophysics, and Structural Biology","Biomedical Engineering and Bioengineering","Biotechnology","Microbiology"],"languages":[],"rights":[],"rights_urls":[],"identifier_entries":[{"key":"dc:identifier","label":"Identifier","values":["10.15368/theses.2019.35"],"render_values":[{"text":"10.15368/theses.2019.35","href":"https://doi.org/10.15368/theses.2019.35","code":true}]}],"person_identifier_entries":[]},"links":{"outbound_url":"https://digitalcommons.calpoly.edu/theses/2037","outbound_label":"Repository record","outbound_source":"dc:identifier","record_url":"https://digitalcommons.calpoly.edu/theses/2037","record_label":"Repository record","record_kind":"record","record_source":"dc:identifier","download_url":null,"download_label":null,"download_source":null,"access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://digitalcommons.calpoly.edu/do/oai/?verb=GetRecord&metadataPrefix=oai_etdms&identifier=oai%3Adigitalcommons.calpoly.edu%3Atheses-3422","prefix":"oai_etdms"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor","label":"Contributor","values":["David Clague"]},{"key":"dc:creator","label":"Author","values":["Tolmasoff, William A"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.available","label":"Dc Date Available","values":["2019-06-11T07:00:00Z"]},{"key":"dc:date.created","label":"Dc Date Created","values":["2019-06-01T07:00:00Z"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Biomedical and General Engineering"]},{"key":"thesis:degree_name","label":"Degree Name","values":["MS in Biomedical Engineering"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["Paper Microbial Fuel Cells","Wastewater Quality Testing","Developing Nations","Biochemistry, Biophysics, and Structural Biology","Biomedical Engineering and Bioengineering","Biotechnology","Microbiology"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier","label":"Identifier","values":["https://digitalcommons.calpoly.edu/theses/2037","10.15368/theses.2019.35"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["This study demonstrated a technique for fabricating simple, low-cost Paper Microbial fuel cells (PMFC’s) in the model of a previous study to, for the first time, produce voltage from wastewater effluent. The PMFC’s were created by stacking and gluing the main components of an MFC together: reservoir layer; anode; cation exchange membrane (CEM); air cathode. A wax printer was used to create the hydrophobic borders of the PMFC’s on filter paper, and graphite paint was applied to the paper to create the anode. The CEM’s considered were filter paper, wax, and Nafion, with Nafion being the most efficient. Finally, the air cathode was made using carbon veil, and leads (or resistors) were placed in both anode and cathode layers for voltage measurement. Confirming previous studies’ results, the PMFC’s had a rapid startup time and sustained voltage for at least 10 minutes. The study also found that: Nafion was the best CEM; painting one side of the anode had the highest voltage; higher surface area increased voltage; increased time from sampling decreased voltage. Thus, this study proved that the small, low-cost PMFC devices described in previous studies can produce a voltage using primary effluent, and showed that the surface area of the PMFC could be optimized to increase voltage."]},{"key":"dc:title","label":"Title","values":["Study of Paper Microbial Fuel Cells for Use in On-Site Wastewater Testing"]}]}],"canonical_facts":{"dc:contributor":["David Clague"],"dc:creator":["Tolmasoff, William A"],"dc:date.available":["2019-06-11T07:00:00Z"],"dc:date.created":["2019-06-01T07:00:00Z"],"dc:description.abstract":["This study demonstrated a technique for fabricating simple, low-cost Paper Microbial fuel cells (PMFC’s) in the model of a previous study to, for the first time, produce voltage from wastewater effluent. The PMFC’s were created by stacking and gluing the main components of an MFC together: reservoir layer; anode; cation exchange membrane (CEM); air cathode. A wax printer was used to create the hydrophobic borders of the PMFC’s on filter paper, and graphite paint was applied to the paper to create the anode. The CEM’s considered were filter paper, wax, and Nafion, with Nafion being the most efficient. Finally, the air cathode was made using carbon veil, and leads (or resistors) were placed in both anode and cathode layers for voltage measurement. Confirming previous studies’ results, the PMFC’s had a rapid startup time and sustained voltage for at least 10 minutes. The study also found that: Nafion was the best CEM; painting one side of the anode had the highest voltage; higher surface area increased voltage; increased time from sampling decreased voltage. Thus, this study proved that the small, low-cost PMFC devices described in previous studies can produce a voltage using primary effluent, and showed that the surface area of the PMFC could be optimized to increase voltage."],"dc:identifier":["https://digitalcommons.calpoly.edu/theses/2037","10.15368/theses.2019.35"],"dc:subject":["Paper Microbial Fuel Cells","Wastewater Quality Testing","Developing Nations","Biochemistry, Biophysics, and Structural Biology","Biomedical Engineering and Bioengineering","Biotechnology","Microbiology"],"dc:title":["Study of Paper Microbial Fuel Cells for Use in On-Site Wastewater Testing"],"thesis:degree_discipline":["Biomedical and General Engineering"],"thesis:degree_name":["MS in Biomedical Engineering"]},"updated_at":"2026-11-19T07:11:08Z"}