{"id":{"repo_id":"clemson","oai_identifier":"oai:open.clemson.edu:all_theses-1864"},"canonical_url":"https://search.ndltd.org/etd/clemson/oai:open.clemson.edu:all_theses-1864","repository":{"repo_id":"clemson","name":"Clemson University","base_url":"https://open.clemson.edu/do/oai/"},"display":{"title":"INVESTIGATING PRE-BREAKDOWN CURRENTS IN POLYMER TANTALUM CAPACITORS","abstract":"Poly(3,4-ethylenedioxythiophene) (PEDOT), a conducting polymer, has been used since the 1990s for the cathode of tantalum capacitors, which have a tantalum anode, and a layer of tantalum pentoxide as the dielectric. Such capacitors are referred to as Polymer Ta capacitors. The first method, an in situ polymerization technique, used to deposit the polymer resulted in capacitors with a significant leakage current and breakdown voltages near 50 V. The second method, a pre-polymerization (pre-poly) technique, resulted in capacitors that have a much lower leakage current and a higher breakdown voltage than the in situ capacitors. In this thesis, an accurate measurement technique for dielectric leakage current, also referred to as the pre-breakdown current, was established for capacitors. Current versus time measurements at constant voltage were performed at several voltages and the results were compiled to obtain the current-voltage (I-V) characteristics of both in situ and pre-poly types of capacitors. These characteristics were then modeled and analyzed, which led to the conclusion that the pre-breakdown current is controlled by the Poole-Frenkel mechanism in the in situ capacitors and by both the Poole-Frenkel and Schottky mechanisms in the pre-poly capacitors. Current versus time measurements were also performed at various temperatures to obtain the activation energy for the current in the capacitors and to verify the leakage mechanisms. Results suggest the presence of shallow 0.15 eV traps in the dielectric of the in situ capacitor and deeper 0.75 eV traps in that of the pre-poly capacitor. Additionally, pre-poly capacitors also have a 0.54 eV Schottky barrier that limits the electrons from being emitted into the dielectric from the electrode. Both the deep trap levels and the Schottky barrier explain the lower leakage current and higher breakdown voltage observed in the pre-poly capacitors as compared to the in situ capacitors.","abstract_html":"Poly(3,4-ethylenedioxythiophene) (PEDOT), a conducting polymer, has been used since the 1990s for the cathode of tantalum capacitors, which have a tantalum anode, and a layer of tantalum pentoxide as the dielectric. Such capacitors are referred to as Polymer Ta capacitors. The first method, an in situ polymerization technique, used to deposit the polymer resulted in capacitors with a significant leakage current and breakdown voltages near 50 V. The second method, a pre-polymerization (pre-poly) technique, resulted in capacitors that have a much lower leakage current and a higher breakdown voltage than the in situ capacitors. In this thesis, an accurate measurement technique for dielectric leakage current, also referred to as the pre-breakdown current, was established for capacitors. Current versus time measurements at constant voltage were performed at several voltages and the results were compiled to obtain the current-voltage (I-V) characteristics of both in situ and pre-poly types of capacitors. These characteristics were then modeled and analyzed, which led to the conclusion that the pre-breakdown current is controlled by the Poole-Frenkel mechanism in the in situ capacitors and by both the Poole-Frenkel and Schottky mechanisms in the pre-poly capacitors. Current versus time measurements were also performed at various temperatures to obtain the activation energy for the current in the capacitors and to verify the leakage mechanisms. Results suggest the presence of shallow 0.15 eV traps in the dielectric of the in situ capacitor and deeper 0.75 eV traps in that of the pre-poly capacitor. Additionally, pre-poly capacitors also have a 0.54 eV Schottky barrier that limits the electrons from being emitted into the dielectric from the electrode. Both the deep trap levels and the Schottky barrier explain the lower leakage current and higher breakdown voltage observed in the pre-poly capacitors as compared to the in situ capacitors.","abstract_has_math":false,"creators":["Alapatt, Githin"],"institution":null,"degree_name":"Master of Science (MS)","degree_level":"Thesis","degree_discipline":"Electrical Engineering","degree_department":null,"school":null,"contributors":["Harrell, William R.","Poole , Kelvin F.","Freeman , Yuri","Greenstein , Joel"],"advisors":[],"committee_chairs":[],"committee_members":[],"year":null,"date_issued":"","date_published":null,"updated_at":"2026-11-19T07:07:33Z","subjects":["Capacitor Breakdown","Capacitor Fabrication","Conductive Polymer","PEDOT","Dielectric Breakdown","Polymer Tantalum Capacitor","Tantalum Pentoxide","Electrical and Computer Engineering"],"languages":[],"rights":[],"rights_urls":[],"identifier_entries":[],"person_identifier_entries":[]},"links":{"outbound_url":"https://open.clemson.edu/all_theses/864","outbound_label":"Repository record","outbound_source":"dc:identifier","record_url":"https://open.clemson.edu/all_theses/864","record_label":"Repository record","record_kind":"record","record_source":"dc:identifier","download_url":null,"download_label":null,"download_source":null,"access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://open.clemson.edu/do/oai/?verb=GetRecord&metadataPrefix=oai_etdms&identifier=oai%3Aopen.clemson.edu%3Aall_theses-1864","prefix":"oai_etdms"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor","label":"Contributor","values":["Harrell, William R.","Poole , Kelvin F.","Freeman , Yuri","Greenstein , Joel"]},{"key":"dc:creator","label":"Author","values":["Alapatt, Githin"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.available","label":"Dc Date Available","values":["2015-09-30T07:00:00Z"]},{"key":"dc:date.created","label":"Dc Date Created","values":["2010-08-01T07:00:00Z"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Electrical Engineering"]},{"key":"thesis:degree_level","label":"Degree Level","values":["Thesis"]},{"key":"thesis:degree_name","label":"Degree Name","values":["Master of Science (MS)"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["Capacitor Breakdown","Capacitor Fabrication","Conductive Polymer","PEDOT","Dielectric Breakdown","Polymer Tantalum Capacitor","Tantalum Pentoxide","Electrical and Computer Engineering"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier","label":"Identifier","values":["https://open.clemson.edu/all_theses/864"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["Poly(3,4-ethylenedioxythiophene) (PEDOT), a conducting polymer, has been used since the 1990s for the cathode of tantalum capacitors, which have a tantalum anode, and a layer of tantalum pentoxide as the dielectric. Such capacitors are referred to as Polymer Ta capacitors. The first method, an in situ polymerization technique, used to deposit the polymer resulted in capacitors with a significant leakage current and breakdown voltages near 50 V. The second method, a pre-polymerization (pre-poly) technique, resulted in capacitors that have a much lower leakage current and a higher breakdown voltage than the in situ capacitors. In this thesis, an accurate measurement technique for dielectric leakage current, also referred to as the pre-breakdown current, was established for capacitors. Current versus time measurements at constant voltage were performed at several voltages and the results were compiled to obtain the current-voltage (I-V) characteristics of both in situ and pre-poly types of capacitors. These characteristics were then modeled and analyzed, which led to the conclusion that the pre-breakdown current is controlled by the Poole-Frenkel mechanism in the in situ capacitors and by both the Poole-Frenkel and Schottky mechanisms in the pre-poly capacitors. Current versus time measurements were also performed at various temperatures to obtain the activation energy for the current in the capacitors and to verify the leakage mechanisms. Results suggest the presence of shallow 0.15 eV traps in the dielectric of the in situ capacitor and deeper 0.75 eV traps in that of the pre-poly capacitor. Additionally, pre-poly capacitors also have a 0.54 eV Schottky barrier that limits the electrons from being emitted into the dielectric from the electrode. Both the deep trap levels and the Schottky barrier explain the lower leakage current and higher breakdown voltage observed in the pre-poly capacitors as compared to the in situ capacitors."]},{"key":"dc:title","label":"Title","values":["INVESTIGATING PRE-BREAKDOWN CURRENTS IN POLYMER TANTALUM CAPACITORS"]}]}],"canonical_facts":{"dc:contributor":["Harrell, William R.","Poole , Kelvin F.","Freeman , Yuri","Greenstein , Joel"],"dc:creator":["Alapatt, Githin"],"dc:date.available":["2015-09-30T07:00:00Z"],"dc:date.created":["2010-08-01T07:00:00Z"],"dc:description.abstract":["Poly(3,4-ethylenedioxythiophene) (PEDOT), a conducting polymer, has been used since the 1990s for the cathode of tantalum capacitors, which have a tantalum anode, and a layer of tantalum pentoxide as the dielectric. Such capacitors are referred to as Polymer Ta capacitors. The first method, an in situ polymerization technique, used to deposit the polymer resulted in capacitors with a significant leakage current and breakdown voltages near 50 V. The second method, a pre-polymerization (pre-poly) technique, resulted in capacitors that have a much lower leakage current and a higher breakdown voltage than the in situ capacitors. In this thesis, an accurate measurement technique for dielectric leakage current, also referred to as the pre-breakdown current, was established for capacitors. Current versus time measurements at constant voltage were performed at several voltages and the results were compiled to obtain the current-voltage (I-V) characteristics of both in situ and pre-poly types of capacitors. These characteristics were then modeled and analyzed, which led to the conclusion that the pre-breakdown current is controlled by the Poole-Frenkel mechanism in the in situ capacitors and by both the Poole-Frenkel and Schottky mechanisms in the pre-poly capacitors. Current versus time measurements were also performed at various temperatures to obtain the activation energy for the current in the capacitors and to verify the leakage mechanisms. Results suggest the presence of shallow 0.15 eV traps in the dielectric of the in situ capacitor and deeper 0.75 eV traps in that of the pre-poly capacitor. Additionally, pre-poly capacitors also have a 0.54 eV Schottky barrier that limits the electrons from being emitted into the dielectric from the electrode. Both the deep trap levels and the Schottky barrier explain the lower leakage current and higher breakdown voltage observed in the pre-poly capacitors as compared to the in situ capacitors."],"dc:identifier":["https://open.clemson.edu/all_theses/864"],"dc:subject":["Capacitor Breakdown","Capacitor Fabrication","Conductive Polymer","PEDOT","Dielectric Breakdown","Polymer Tantalum Capacitor","Tantalum Pentoxide","Electrical and Computer Engineering"],"dc:title":["INVESTIGATING PRE-BREAKDOWN CURRENTS IN POLYMER TANTALUM CAPACITORS"],"thesis:degree_discipline":["Electrical Engineering"],"thesis:degree_level":["Thesis"],"thesis:degree_name":["Master of Science (MS)"]},"updated_at":"2026-11-19T07:07:33Z"}