{"id":{"repo_id":"cornell","oai_identifier":"oai:ecommons.cornell.edu:1813/116366"},"canonical_url":"https://search.ndltd.org/etd/cornell/oai:ecommons.cornell.edu:1813/116366","repository":{"repo_id":"cornell","name":"Cornell University","base_url":"https://ecommons.cornell.edu/server/oai/request"},"display":{"title":"LAYERED-BY-LAYERED POLYIMIDE COATED SEPARATOR VIA ELECTRPSPRAY AND ELECTROSPINNING METHODS FOR LITHIUM-ION BATTERIES","abstract":"In order to improve the safety of lithium-ion batteries, polyimide (PI) are introduced to be coated on polyethylene (PE) separator to enhance its thermal and mechanical properties simultaneously via electrospray as well as electrospinning methods. Layer- by-layered structure separators were prepared with a layer of E-spray coating firstly and E-spinning coating secondly. Specifically, spray coating is responsible for heat resistance due to its uniformity and high molten point. Meanwhile, fibers produced by electrospinning play an very important role in increasement of mechanical strength. All electrospray conditions were optimized in order to get the best quality of coating and the morphology of the coating surface prepared under different conditions were compared by scanning electron microscope (SEM). At the same time, heat shrinkage test and dynamic mechanical analysis (DMA) test were also conducted to see if PE separator’s thermal as well as properties achieved our goals. What’s more, Fourier- transform infrared spectroscopy (FT-IR) was also applied in my project to make sure there is no structural changes after plasma treatment that is beneficial to combination between spray and fiber coatings. Finally, electrochemical characterization of cells with prepared separators were conducted in order to prove the practicability of lithium-ion batteries.","abstract_html":"In order to improve the safety of lithium-ion batteries, polyimide (PI) are introduced to be coated on polyethylene (PE) separator to enhance its thermal and mechanical properties simultaneously via electrospray as well as electrospinning methods. Layer- by-layered structure separators were prepared with a layer of E-spray coating firstly and E-spinning coating secondly. Specifically, spray coating is responsible for heat resistance due to its uniformity and high molten point. Meanwhile, fibers produced by electrospinning play an very important role in increasement of mechanical strength. All electrospray conditions were optimized in order to get the best quality of coating and the morphology of the coating surface prepared under different conditions were compared by scanning electron microscope (SEM). At the same time, heat shrinkage test and dynamic mechanical analysis (DMA) test were also conducted to see if PE separator’s thermal as well as properties achieved our goals. What’s more, Fourier- transform infrared spectroscopy (FT-IR) was also applied in my project to make sure there is no structural changes after plasma treatment that is beneficial to combination between spray and fiber coatings. Finally, electrochemical characterization of cells with prepared separators were conducted in order to prove the practicability of lithium-ion batteries.","abstract_has_math":false,"creators":["Zhang, Chunyi"],"institution":"Cornell University","degree_name":"M.S., Chemical Engineering","degree_level":"Master of Science","degree_discipline":"Chemical Engineering","degree_department":null,"school":null,"contributors":[],"advisors":[],"committee_chairs":["Joo, Yong"],"committee_members":["Uyar, Tamer"],"year":2024,"date_issued":"2024-08","date_published":"2024-08","updated_at":"2026-11-19T03:11:32Z","subjects":["Electrospinning","Electrospray","Lithium Ion Battery","Separator"],"languages":["en"],"rights":[],"rights_urls":[],"identifier_entries":[{"key":"dc:identifier.doi","label":"DOI","values":["https://doi.org/10.7298/f5yb-3s58"],"render_values":[{"text":"https://doi.org/10.7298/f5yb-3s58","href":"https://doi.org/10.7298/f5yb-3s58","code":true}]},{"key":"dc:identifier.bibid","label":"Dc Identifier Bibid","values":["16611901"],"render_values":[{"text":"16611901","href":null,"code":true}]},{"key":"dc:identifier.other","label":"Dc Identifier Other","values":["ProQuest Submission ID: 12257","ProQuest Publication ID: 31489087"],"render_values":[{"text":"ProQuest Submission ID: 12257","href":null,"code":true},{"text":"ProQuest Publication ID: 31489087","href":null,"code":true}]}],"person_identifier_entries":[]},"links":{"outbound_url":"https://hdl.handle.net/1813/116366","outbound_label":"Handle","outbound_source":"dc:identifier.uri","record_url":"https://hdl.handle.net/1813/116366","record_label":"Repository record","record_kind":"handle","record_source":"dc:identifier.uri","download_url":null,"download_label":null,"download_source":null,"access_status":"embargoed","embargo_until":"2026-09-03","access_note":null},"source_record":{"url":"https://ecommons.cornell.edu/server/oai/request?verb=GetRecord&metadataPrefix=dim&identifier=oai%3Aecommons.cornell.edu%3A1813%2F116366","prefix":"dim"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.chair","label":"Chair","values":["Joo, Yong"]},{"key":"dc:contributor.committeemember","label":"Committee Member","values":["Uyar, Tamer"]},{"key":"dc:creator","label":"Author","values":["Zhang, Chunyi"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.accessioned","label":"Dc Date Accessioned","values":["2025-01-14T19:40:11Z"]},{"key":"dc:date.embargo","label":"Dc Date Embargo","values":["2026-09-03"]},{"key":"dc:date.issued","label":"Date","values":["2024-08"]},{"key":"dc:relation.uri","label":"Dc Relation URI","values":["https://newcatalog.library.cornell.edu/catalog/16611901"]},{"key":"dc:type","label":"Dc Type","values":["dissertation or thesis"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Chemical Engineering"]},{"key":"thesis:degree_level","label":"Degree Level","values":["Master of Science"]},{"key":"thesis:degree_name","label":"Degree Name","values":["M.S., Chemical Engineering"]},{"key":"thesis:institution_name","label":"Thesis Institution Name","values":["Cornell University"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["Electrospinning","Electrospray","Lithium Ion Battery","Separator"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.iso","label":"Language (ISO)","values":["en"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.bibid","label":"Dc Identifier Bibid","values":["16611901"]},{"key":"dc:identifier.doi","label":"DOI","values":["https://doi.org/10.7298/f5yb-3s58"]},{"key":"dc:identifier.other","label":"Dc Identifier Other","values":["ProQuest Submission ID: 12257","ProQuest Publication ID: 31489087"]},{"key":"dc:identifier.uri","label":"Identifier URI","values":["https://hdl.handle.net/1813/116366"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"cerif:openaire","label":"Cerif Openaire","values":["<Publication xmlns=\"https://www.openaire.eu/cerif-profile/1.1/\" id=\"9291689b-5d00-4ef3-b1f3-df1d45e7075f\"> <Type xmlns=\"https://www.openaire.eu/cerif-profile/vocab/COAR_Publication_Types\">http://purl.org/coar/resource_type/c_1843</Type> <Language>en</Language> <Title>LAYERED-BY-LAYERED POLYIMIDE COATED SEPARATOR VIA ELECTRPSPRAY AND ELECTROSPINNING METHODS FOR LITHIUM-ION BATTERIES</Title> <PublishedIn> <Publication> </Publication> </PublishedIn> <PublicationDate>2024-08</PublicationDate> <DOI>https://doi.org/10.7298/f5yb-3s58</DOI> <Authors> <Author> <DisplayName>Zhang, Chunyi</DisplayName> <Affiliation> <OrgUnit> </OrgUnit> </Affiliation> </Author> </Authors> <Editors> </Editors> <Publishers> <Publisher> <OrgUnit /> </Publisher> </Publishers> <Keyword>Electrospinning</Keyword> <Keyword>Electrospray</Keyword> <Keyword>Lithium Ion Battery</Keyword> <Keyword>Separator</Keyword> <Abstract>In order to improve the safety of lithium-ion batteries, polyimide (PI) are introduced to be coated on polyethylene (PE) separator to enhance its thermal and mechanical properties simultaneously via electrospray as well as electrospinning methods. Layer- by-layered structure separators were prepared with a layer of E-spray coating firstly and E-spinning coating secondly. Specifically, spray coating is responsible for heat resistance due to its uniformity and high molten point. Meanwhile, fibers produced by electrospinning play an very important role in increasement of mechanical strength. All electrospray conditions were optimized in order to get the best quality of coating and the morphology of the coating surface prepared under different conditions were compared by scanning electron microscope (SEM). At the same time, heat shrinkage test and dynamic mechanical analysis (DMA) test were also conducted to see if PE separator’s thermal as well as properties achieved our goals. What’s more, Fourier- transform infrared spectroscopy (FT-IR) was also applied in my project to make sure there is no structural changes after plasma treatment that is beneficial to combination between spray and fiber coatings. Finally, electrochemical characterization of cells with prepared separators were conducted in order to prove the practicability of lithium-ion batteries.</Abstract> <Access xmlns=\"http://purl.org/coar/access_right\" > </Access> </Publication>"]},{"key":"cris:virtual.author","label":"Cris Virtual Author","values":["Zhang, Chunyi"]},{"key":"cris:virtualsource.collection","label":"Cris Virtualsource Collection","values":["5893a6ea-7af3-41d7-abc6-04bcd26ab5df"]},{"key":"dc:description","label":"Description","values":["49 pages"]},{"key":"dc:description.abstract","label":"Abstract","values":["In order to improve the safety of lithium-ion batteries, polyimide (PI) are introduced to be coated on polyethylene (PE) separator to enhance its thermal and mechanical properties simultaneously via electrospray as well as electrospinning methods. Layer- by-layered structure separators were prepared with a layer of E-spray coating firstly and E-spinning coating secondly. Specifically, spray coating is responsible for heat resistance due to its uniformity and high molten point. Meanwhile, fibers produced by electrospinning play an very important role in increasement of mechanical strength. All electrospray conditions were optimized in order to get the best quality of coating and the morphology of the coating surface prepared under different conditions were compared by scanning electron microscope (SEM). At the same time, heat shrinkage test and dynamic mechanical analysis (DMA) test were also conducted to see if PE separator’s thermal as well as properties achieved our goals. What’s more, Fourier- transform infrared spectroscopy (FT-IR) was also applied in my project to make sure there is no structural changes after plasma treatment that is beneficial to combination between spray and fiber coatings. Finally, electrochemical characterization of cells with prepared separators were conducted in order to prove the practicability of lithium-ion batteries."]},{"key":"dc:description.collection","label":"Dc Description Collection","values":["Cornell Theses and Dissertations"]},{"key":"dc:format.mimetype","label":"Dc Format Mimetype","values":["application/pdf"]},{"key":"dcterms:license","label":"Dcterms License","values":["https://hdl.handle.net/1813/59810.2"]},{"key":"dc:title","label":"Title","values":["LAYERED-BY-LAYERED POLYIMIDE COATED SEPARATOR VIA ELECTRPSPRAY AND ELECTROSPINNING METHODS FOR LITHIUM-ION BATTERIES"]},{"key":"dspace:entity.type","label":"Dspace Entity Type","values":["Publication"]},{"key":"others:access_status","label":"Others Access Status","values":["embargo"]}]}],"canonical_facts":{"cerif:openaire":["<Publication xmlns=\"https://www.openaire.eu/cerif-profile/1.1/\" id=\"9291689b-5d00-4ef3-b1f3-df1d45e7075f\"> <Type xmlns=\"https://www.openaire.eu/cerif-profile/vocab/COAR_Publication_Types\">http://purl.org/coar/resource_type/c_1843</Type> <Language>en</Language> <Title>LAYERED-BY-LAYERED POLYIMIDE COATED SEPARATOR VIA ELECTRPSPRAY AND ELECTROSPINNING METHODS FOR LITHIUM-ION BATTERIES</Title> <PublishedIn> <Publication> </Publication> </PublishedIn> <PublicationDate>2024-08</PublicationDate> <DOI>https://doi.org/10.7298/f5yb-3s58</DOI> <Authors> <Author> <DisplayName>Zhang, Chunyi</DisplayName> <Affiliation> <OrgUnit> </OrgUnit> </Affiliation> </Author> </Authors> <Editors> </Editors> <Publishers> <Publisher> <OrgUnit /> </Publisher> </Publishers> <Keyword>Electrospinning</Keyword> <Keyword>Electrospray</Keyword> <Keyword>Lithium Ion Battery</Keyword> <Keyword>Separator</Keyword> <Abstract>In order to improve the safety of lithium-ion batteries, polyimide (PI) are introduced to be coated on polyethylene (PE) separator to enhance its thermal and mechanical properties simultaneously via electrospray as well as electrospinning methods. Layer- by-layered structure separators were prepared with a layer of E-spray coating firstly and E-spinning coating secondly. Specifically, spray coating is responsible for heat resistance due to its uniformity and high molten point. Meanwhile, fibers produced by electrospinning play an very important role in increasement of mechanical strength. All electrospray conditions were optimized in order to get the best quality of coating and the morphology of the coating surface prepared under different conditions were compared by scanning electron microscope (SEM). At the same time, heat shrinkage test and dynamic mechanical analysis (DMA) test were also conducted to see if PE separator’s thermal as well as properties achieved our goals. What’s more, Fourier- transform infrared spectroscopy (FT-IR) was also applied in my project to make sure there is no structural changes after plasma treatment that is beneficial to combination between spray and fiber coatings. Finally, electrochemical characterization of cells with prepared separators were conducted in order to prove the practicability of lithium-ion batteries.</Abstract> <Access xmlns=\"http://purl.org/coar/access_right\" > </Access> </Publication>"],"cris:virtual.author":["Zhang, Chunyi"],"cris:virtualsource.collection":["5893a6ea-7af3-41d7-abc6-04bcd26ab5df"],"dc:contributor.chair":["Joo, Yong"],"dc:contributor.committeemember":["Uyar, Tamer"],"dc:creator":["Zhang, Chunyi"],"dc:date.accessioned":["2025-01-14T19:40:11Z"],"dc:date.embargo":["2026-09-03"],"dc:date.issued":["2024-08"],"dc:description":["49 pages"],"dc:description.abstract":["In order to improve the safety of lithium-ion batteries, polyimide (PI) are introduced to be coated on polyethylene (PE) separator to enhance its thermal and mechanical properties simultaneously via electrospray as well as electrospinning methods. Layer- by-layered structure separators were prepared with a layer of E-spray coating firstly and E-spinning coating secondly. Specifically, spray coating is responsible for heat resistance due to its uniformity and high molten point. Meanwhile, fibers produced by electrospinning play an very important role in increasement of mechanical strength. All electrospray conditions were optimized in order to get the best quality of coating and the morphology of the coating surface prepared under different conditions were compared by scanning electron microscope (SEM). At the same time, heat shrinkage test and dynamic mechanical analysis (DMA) test were also conducted to see if PE separator’s thermal as well as properties achieved our goals. What’s more, Fourier- transform infrared spectroscopy (FT-IR) was also applied in my project to make sure there is no structural changes after plasma treatment that is beneficial to combination between spray and fiber coatings. Finally, electrochemical characterization of cells with prepared separators were conducted in order to prove the practicability of lithium-ion batteries."],"dc:description.collection":["Cornell Theses and Dissertations"],"dc:format.mimetype":["application/pdf"],"dc:identifier.bibid":["16611901"],"dc:identifier.doi":["https://doi.org/10.7298/f5yb-3s58"],"dc:identifier.other":["ProQuest Submission ID: 12257","ProQuest Publication ID: 31489087"],"dc:identifier.uri":["https://hdl.handle.net/1813/116366"],"dc:language.iso":["en"],"dc:relation.uri":["https://newcatalog.library.cornell.edu/catalog/16611901"],"dc:subject":["Electrospinning","Electrospray","Lithium Ion Battery","Separator"],"dcterms:license":["https://hdl.handle.net/1813/59810.2"],"dc:title":["LAYERED-BY-LAYERED POLYIMIDE COATED SEPARATOR VIA ELECTRPSPRAY AND ELECTROSPINNING METHODS FOR LITHIUM-ION BATTERIES"],"dc:type":["dissertation or thesis"],"dspace:entity.type":["Publication"],"others:access_status":["embargo"],"thesis:degree_discipline":["Chemical Engineering"],"thesis:degree_level":["Master of Science"],"thesis:degree_name":["M.S., Chemical Engineering"],"thesis:institution_name":["Cornell University"]},"updated_at":"2026-11-19T03:11:32Z"}