{"id":{"repo_id":"cornell","oai_identifier":"oai:ecommons.cornell.edu:1813/126655"},"canonical_url":"https://search.ndltd.org/etd/cornell/oai:ecommons.cornell.edu:1813/126655","repository":{"repo_id":"cornell","name":"Cornell University","base_url":"https://ecommons.cornell.edu/server/oai/request"},"display":{"title":"ARCHITECTURES FOR SOFT-SWITCHING AND POWER SCALING OF POWER CONVERTERS","abstract":"Realizing compact power converters requires operation at high switching frequencies. However, this introduces challenges in maintaining soft switching over wide operating conditions and enabling scalable high-power operation without compromising efficiency. This thesis develops circuit architectures, control strategies, and design methodologies to address these challenges in high-frequency power converters, with applications in multi-MHz wireless power transfer (WPT) and wide-operating-range wired chargers. First, an auxiliary zero-voltage-switching (ZVS) inductor-based approach is developed for multi-MHz capacitive WPT systems. It achieves ZVS without requiring large inductive phase shifts from the resonant matching network, significantly reducing circulating currents. Experimental validation using a 6.78-MHz, 12-cm air-gap prototype demonstrates 5% higher efficiency and 32% higher power transfer compared to the conventional ZVS approach. Next, a low-loss multi-MHz magnetic-core toroidal inductor is developed to replace bulky air-core matching network inductors in capacitive WPT systems. Using NiZn ferrite, quasi-distributed air gaps, and interleaved foil windings, a 13.56-MHz, 5-μH prototype inductor operating at 20 A peak achieves a quality factor of ~1190 with a 4× reduction in volume compared to air-core counterparts. To address power scaling limitations in multi-MHz capacitive WPT systems, scalable power architectures are developed using passive power combining networks, along with device-level paralleling enabled by a highly symmetric PCB layout. These techniques are experimentally validated through multi-kilowatt prototypes, culminating in the highest-power capacitive WPT system demonstrated to date at 44.3 kW, achieving 85.2% peak dc-to-dc efficiency and 132.9 kW/m² power transfer density. For wired charging applications, a fully soft-switched impedance control network (ICN)-based single-stage ac–dc converter is developed. An auxiliary ZVS approach combined with phase-shift control enables soft-switching of all high-frequency transistors while achieving power factor correction (PFC) and output regulation. A reconfigurable active-bridge architecture further improves the ICN converter performance over wide operating ranges. A 2-kW universal-input ICN-based ac–dc prototype with a 200 V to 500 V output range is built and tested, achieving a power density of 104 W/in³ and a peak efficiency of 94.4%. The ICN architecture is further extended to multi-output single-stage ac–dc converters using a multi-winding transformer and a generalized phase-shift control strategy, enabling simultaneous regulation of multiple isolated outputs while maintaining soft-switching and PFC operation. A 3.3-kW universal-input dual-output prototype, with each output port supporting 24 V to 96 V and up to 1.65 kW, is built and tested, achieving a power density of 162 W/in³ and a peak efficiency of 94.8%. Finally, a modeling framework is developed to analyze soft-switching behavior in resonant converters operating under beat-frequency modulation, where multiple switching frequencies are simultaneously present.","abstract_html":"Realizing compact power converters requires operation at high switching frequencies. However, this introduces challenges in maintaining soft switching over wide operating conditions and enabling scalable high-power operation without compromising efficiency. This thesis develops circuit architectures, control strategies, and design methodologies to address these challenges in high-frequency power converters, with applications in multi-MHz wireless power transfer (WPT) and wide-operating-range wired chargers. First, an auxiliary zero-voltage-switching (ZVS) inductor-based approach is developed for multi-MHz capacitive WPT systems. It achieves ZVS without requiring large inductive phase shifts from the resonant matching network, significantly reducing circulating currents. Experimental validation using a 6.78-MHz, 12-cm air-gap prototype demonstrates 5% higher efficiency and 32% higher power transfer compared to the conventional ZVS approach. Next, a low-loss multi-MHz magnetic-core toroidal inductor is developed to replace bulky air-core matching network inductors in capacitive WPT systems. Using NiZn ferrite, quasi-distributed air gaps, and interleaved foil windings, a 13.56-MHz, 5-μH prototype inductor operating at 20 A peak achieves a quality factor of ~1190 with a 4× reduction in volume compared to air-core counterparts. To address power scaling limitations in multi-MHz capacitive WPT systems, scalable power architectures are developed using passive power combining networks, along with device-level paralleling enabled by a highly symmetric PCB layout. These techniques are experimentally validated through multi-kilowatt prototypes, culminating in the highest-power capacitive WPT system demonstrated to date at 44.3 kW, achieving 85.2% peak dc-to-dc efficiency and 132.9 kW/m² power transfer density. For wired charging applications, a fully soft-switched impedance control network (ICN)-based single-stage ac–dc converter is developed. An auxiliary ZVS approach combined with phase-shift control enables soft-switching of all high-frequency transistors while achieving power factor correction (PFC) and output regulation. A reconfigurable active-bridge architecture further improves the ICN converter performance over wide operating ranges. A 2-kW universal-input ICN-based ac–dc prototype with a 200 V to 500 V output range is built and tested, achieving a power density of 104 W/in³ and a peak efficiency of 94.4%. The ICN architecture is further extended to multi-output single-stage ac–dc converters using a multi-winding transformer and a generalized phase-shift control strategy, enabling simultaneous regulation of multiple isolated outputs while maintaining soft-switching and PFC operation. A 3.3-kW universal-input dual-output prototype, with each output port supporting 24 V to 96 V and up to 1.65 kW, is built and tested, achieving a power density of 162 W/in³ and a peak efficiency of 94.8%. Finally, a modeling framework is developed to analyze soft-switching behavior in resonant converters operating under beat-frequency modulation, where multiple switching frequencies are simultaneously present.","abstract_has_math":false,"creators":["Etta, Dheeraj"],"institution":"Cornell University","degree_name":"Ph. D., Electrical and Computer Engineering","degree_level":"Doctor of Philosophy","degree_discipline":"Electrical and Computer Engineering","degree_department":null,"school":null,"contributors":[],"advisors":[],"committee_chairs":["Afridi, Khurram"],"committee_members":["Monticone, Francesco","Molnar, Alyosha"],"year":2026,"date_issued":"2026-05","date_published":"2026-05","updated_at":"2026-11-19T03:13:28Z","subjects":["Chargers","Impedance Control Network","Multi-MHz","Power Scaling","Soft-Switching","Wireless Power Transfer"],"languages":["en"],"rights":[],"rights_urls":[],"identifier_entries":[{"key":"dc:identifier.doi","label":"DOI","values":["https://doi.org/10.7298/k122-3757"],"render_values":[{"text":"https://doi.org/10.7298/k122-3757","href":"https://doi.org/10.7298/k122-3757","code":true}]},{"key":"dc:identifier.other","label":"Dc Identifier Other","values":["Etta_cornellgrad_0058F_15539","https://www.proquest.com/LegacyDocView/DISSNUM/32674018"],"render_values":[{"text":"Etta_cornellgrad_0058F_15539","href":null,"code":true},{"text":"https://www.proquest.com/LegacyDocView/DISSNUM/32674018","href":"https://www.proquest.com/LegacyDocView/DISSNUM/32674018","code":true}]}],"person_identifier_entries":[]},"links":{"outbound_url":"https://hdl.handle.net/1813/126655","outbound_label":"Handle","outbound_source":"dc:identifier.uri","record_url":"https://hdl.handle.net/1813/126655","record_label":"Repository record","record_kind":"handle","record_source":"dc:identifier.uri","download_url":null,"download_label":null,"download_source":null,"access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://ecommons.cornell.edu/server/oai/request?verb=GetRecord&metadataPrefix=dim&identifier=oai%3Aecommons.cornell.edu%3A1813%2F126655","prefix":"dim"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.chair","label":"Chair","values":["Afridi, Khurram"]},{"key":"dc:contributor.committeemember","label":"Committee Member","values":["Monticone, Francesco","Molnar, Alyosha"]},{"key":"dc:creator","label":"Author","values":["Etta, Dheeraj"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.accessioned","label":"Dc Date Accessioned","values":["2026-08-26T19:53:04Z"]},{"key":"dc:date.available","label":"Dc Date Available","values":["2026-08-26T19:53:04Z"]},{"key":"dc:date.issued","label":"Date","values":["2026-05"]},{"key":"dc:type","label":"Dc Type","values":["dissertation or thesis"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Electrical and Computer Engineering"]},{"key":"thesis:degree_level","label":"Degree Level","values":["Doctor of Philosophy"]},{"key":"thesis:degree_name","label":"Degree Name","values":["Ph. D., Electrical and Computer Engineering"]},{"key":"thesis:institution_name","label":"Thesis Institution Name","values":["Cornell University"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["Chargers","Impedance Control Network","Multi-MHz","Power Scaling","Soft-Switching","Wireless Power Transfer"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.iso","label":"Language (ISO)","values":["en"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.doi","label":"DOI","values":["https://doi.org/10.7298/k122-3757"]},{"key":"dc:identifier.other","label":"Dc Identifier Other","values":["Etta_cornellgrad_0058F_15539","https://www.proquest.com/LegacyDocView/DISSNUM/32674018"]},{"key":"dc:identifier.uri","label":"Identifier URI","values":["https://hdl.handle.net/1813/126655"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"cerif:openaire","label":"Cerif Openaire","values":["<Publication xmlns=\"https://www.openaire.eu/cerif-profile/1.1/\" id=\"16fd70fe-e1c8-4a45-be27-27a41a720fa2\"> <Type xmlns=\"https://www.openaire.eu/cerif-profile/vocab/COAR_Publication_Types\">http://purl.org/coar/resource_type/c_1843</Type> <Language>en</Language> <Title>ARCHITECTURES FOR SOFT-SWITCHING AND POWER SCALING OF POWER CONVERTERS</Title> <PublishedIn> <Publication> </Publication> </PublishedIn> <PublicationDate>2026-05</PublicationDate> <DOI>https://doi.org/10.7298/k122-3757</DOI> <Authors> <Author> <DisplayName>Etta, Dheeraj</DisplayName> <Affiliation> <OrgUnit> </OrgUnit> </Affiliation> </Author> </Authors> <Editors> </Editors> <Publishers> <Publisher> <OrgUnit /> </Publisher> </Publishers> <Keyword>Chargers</Keyword> <Keyword>Impedance Control Network</Keyword> <Keyword>Multi-MHz</Keyword> <Keyword>Power Scaling</Keyword> <Keyword>Soft-Switching</Keyword> <Keyword>Wireless Power Transfer</Keyword> <Abstract>Realizing compact power converters requires operation at high switching frequencies. However, this introduces challenges in maintaining soft switching over wide operating conditions and enabling scalable high-power operation without compromising efficiency. This thesis develops circuit architectures, control strategies, and design methodologies to address these challenges in high-frequency power converters, with applications in multi-MHz wireless power transfer (WPT) and wide-operating-range wired chargers. First, an auxiliary zero-voltage-switching (ZVS) inductor-based approach is developed for multi-MHz capacitive WPT systems. It achieves ZVS without requiring large inductive phase shifts from the resonant matching network, significantly reducing circulating currents. Experimental validation using a 6.78-MHz, 12-cm air-gap prototype demonstrates 5% higher efficiency and 32% higher power transfer compared to the conventional ZVS approach. Next, a low-loss multi-MHz magnetic-core toroidal inductor is developed to replace bulky air-core matching network inductors in capacitive WPT systems. Using NiZn ferrite, quasi-distributed air gaps, and interleaved foil windings, a 13.56-MHz, 5-μH prototype inductor operating at 20 A peak achieves a quality factor of ~1190 with a 4× reduction in volume compared to air-core counterparts. To address power scaling limitations in multi-MHz capacitive WPT systems, scalable power architectures are developed using passive power combining networks, along with device-level paralleling enabled by a highly symmetric PCB layout. These techniques are experimentally validated through multi-kilowatt prototypes, culminating in the highest-power capacitive WPT system demonstrated to date at 44.3 kW, achieving 85.2% peak dc-to-dc efficiency and 132.9 kW/m² power transfer density. For wired charging applications, a fully soft-switched impedance control network (ICN)-based single-stage ac–dc converter is developed. An auxiliary ZVS approach combined with phase-shift control enables soft-switching of all high-frequency transistors while achieving power factor correction (PFC) and output regulation. A reconfigurable active-bridge architecture further improves the ICN converter performance over wide operating ranges. A 2-kW universal-input ICN-based ac–dc prototype with a 200 V to 500 V output range is built and tested, achieving a power density of 104 W/in³ and a peak efficiency of 94.4%. The ICN architecture is further extended to multi-output single-stage ac–dc converters using a multi-winding transformer and a generalized phase-shift control strategy, enabling simultaneous regulation of multiple isolated outputs while maintaining soft-switching and PFC operation. A 3.3-kW universal-input dual-output prototype, with each output port supporting 24 V to 96 V and up to 1.65 kW, is built and tested, achieving a power density of 162 W/in³ and a peak efficiency of 94.8%. Finally, a modeling framework is developed to analyze soft-switching behavior in resonant converters operating under beat-frequency modulation, where multiple switching frequencies are simultaneously present.</Abstract> <Access xmlns=\"http://purl.org/coar/access_right\" > </Access> </Publication>"]},{"key":"cris:virtual.author","label":"Cris Virtual Author","values":["Etta, Dheeraj"]},{"key":"cris:virtualsource.collection","label":"Cris Virtualsource Collection","values":["5893a6ea-7af3-41d7-abc6-04bcd26ab5df"]},{"key":"dc:description","label":"Description","values":["174 pages"]},{"key":"dc:description.abstract","label":"Abstract","values":["Realizing compact power converters requires operation at high switching frequencies. However, this introduces challenges in maintaining soft switching over wide operating conditions and enabling scalable high-power operation without compromising efficiency. This thesis develops circuit architectures, control strategies, and design methodologies to address these challenges in high-frequency power converters, with applications in multi-MHz wireless power transfer (WPT) and wide-operating-range wired chargers. First, an auxiliary zero-voltage-switching (ZVS) inductor-based approach is developed for multi-MHz capacitive WPT systems. It achieves ZVS without requiring large inductive phase shifts from the resonant matching network, significantly reducing circulating currents. Experimental validation using a 6.78-MHz, 12-cm air-gap prototype demonstrates 5% higher efficiency and 32% higher power transfer compared to the conventional ZVS approach. Next, a low-loss multi-MHz magnetic-core toroidal inductor is developed to replace bulky air-core matching network inductors in capacitive WPT systems. Using NiZn ferrite, quasi-distributed air gaps, and interleaved foil windings, a 13.56-MHz, 5-μH prototype inductor operating at 20 A peak achieves a quality factor of ~1190 with a 4× reduction in volume compared to air-core counterparts. To address power scaling limitations in multi-MHz capacitive WPT systems, scalable power architectures are developed using passive power combining networks, along with device-level paralleling enabled by a highly symmetric PCB layout. These techniques are experimentally validated through multi-kilowatt prototypes, culminating in the highest-power capacitive WPT system demonstrated to date at 44.3 kW, achieving 85.2% peak dc-to-dc efficiency and 132.9 kW/m² power transfer density. For wired charging applications, a fully soft-switched impedance control network (ICN)-based single-stage ac–dc converter is developed. An auxiliary ZVS approach combined with phase-shift control enables soft-switching of all high-frequency transistors while achieving power factor correction (PFC) and output regulation. A reconfigurable active-bridge architecture further improves the ICN converter performance over wide operating ranges. A 2-kW universal-input ICN-based ac–dc prototype with a 200 V to 500 V output range is built and tested, achieving a power density of 104 W/in³ and a peak efficiency of 94.4%. The ICN architecture is further extended to multi-output single-stage ac–dc converters using a multi-winding transformer and a generalized phase-shift control strategy, enabling simultaneous regulation of multiple isolated outputs while maintaining soft-switching and PFC operation. A 3.3-kW universal-input dual-output prototype, with each output port supporting 24 V to 96 V and up to 1.65 kW, is built and tested, achieving a power density of 162 W/in³ and a peak efficiency of 94.8%. Finally, a modeling framework is developed to analyze soft-switching behavior in resonant converters operating under beat-frequency modulation, where multiple switching frequencies are simultaneously present."]},{"key":"dc:description.collection","label":"Dc Description Collection","values":["Cornell Theses and Dissertations"]},{"key":"dc:format.mimetype","label":"Dc Format Mimetype","values":["application/pdf"]},{"key":"dcterms:license","label":"Dcterms License","values":["https://hdl.handle.net/1813/59810.2"]},{"key":"dc:title","label":"Title","values":["ARCHITECTURES FOR SOFT-SWITCHING AND POWER SCALING OF POWER CONVERTERS"]},{"key":"dspace:entity.type","label":"Dspace Entity Type","values":["Publication"]},{"key":"others:access_status","label":"Others Access Status","values":["open.access"]}]}],"canonical_facts":{"cerif:openaire":["<Publication xmlns=\"https://www.openaire.eu/cerif-profile/1.1/\" id=\"16fd70fe-e1c8-4a45-be27-27a41a720fa2\"> <Type xmlns=\"https://www.openaire.eu/cerif-profile/vocab/COAR_Publication_Types\">http://purl.org/coar/resource_type/c_1843</Type> <Language>en</Language> <Title>ARCHITECTURES FOR SOFT-SWITCHING AND POWER SCALING OF POWER CONVERTERS</Title> <PublishedIn> <Publication> </Publication> </PublishedIn> <PublicationDate>2026-05</PublicationDate> <DOI>https://doi.org/10.7298/k122-3757</DOI> <Authors> <Author> <DisplayName>Etta, Dheeraj</DisplayName> <Affiliation> <OrgUnit> </OrgUnit> </Affiliation> </Author> </Authors> <Editors> </Editors> <Publishers> <Publisher> <OrgUnit /> </Publisher> </Publishers> <Keyword>Chargers</Keyword> <Keyword>Impedance Control Network</Keyword> <Keyword>Multi-MHz</Keyword> <Keyword>Power Scaling</Keyword> <Keyword>Soft-Switching</Keyword> <Keyword>Wireless Power Transfer</Keyword> <Abstract>Realizing compact power converters requires operation at high switching frequencies. However, this introduces challenges in maintaining soft switching over wide operating conditions and enabling scalable high-power operation without compromising efficiency. This thesis develops circuit architectures, control strategies, and design methodologies to address these challenges in high-frequency power converters, with applications in multi-MHz wireless power transfer (WPT) and wide-operating-range wired chargers. First, an auxiliary zero-voltage-switching (ZVS) inductor-based approach is developed for multi-MHz capacitive WPT systems. It achieves ZVS without requiring large inductive phase shifts from the resonant matching network, significantly reducing circulating currents. Experimental validation using a 6.78-MHz, 12-cm air-gap prototype demonstrates 5% higher efficiency and 32% higher power transfer compared to the conventional ZVS approach. Next, a low-loss multi-MHz magnetic-core toroidal inductor is developed to replace bulky air-core matching network inductors in capacitive WPT systems. Using NiZn ferrite, quasi-distributed air gaps, and interleaved foil windings, a 13.56-MHz, 5-μH prototype inductor operating at 20 A peak achieves a quality factor of ~1190 with a 4× reduction in volume compared to air-core counterparts. To address power scaling limitations in multi-MHz capacitive WPT systems, scalable power architectures are developed using passive power combining networks, along with device-level paralleling enabled by a highly symmetric PCB layout. These techniques are experimentally validated through multi-kilowatt prototypes, culminating in the highest-power capacitive WPT system demonstrated to date at 44.3 kW, achieving 85.2% peak dc-to-dc efficiency and 132.9 kW/m² power transfer density. For wired charging applications, a fully soft-switched impedance control network (ICN)-based single-stage ac–dc converter is developed. An auxiliary ZVS approach combined with phase-shift control enables soft-switching of all high-frequency transistors while achieving power factor correction (PFC) and output regulation. A reconfigurable active-bridge architecture further improves the ICN converter performance over wide operating ranges. A 2-kW universal-input ICN-based ac–dc prototype with a 200 V to 500 V output range is built and tested, achieving a power density of 104 W/in³ and a peak efficiency of 94.4%. The ICN architecture is further extended to multi-output single-stage ac–dc converters using a multi-winding transformer and a generalized phase-shift control strategy, enabling simultaneous regulation of multiple isolated outputs while maintaining soft-switching and PFC operation. A 3.3-kW universal-input dual-output prototype, with each output port supporting 24 V to 96 V and up to 1.65 kW, is built and tested, achieving a power density of 162 W/in³ and a peak efficiency of 94.8%. Finally, a modeling framework is developed to analyze soft-switching behavior in resonant converters operating under beat-frequency modulation, where multiple switching frequencies are simultaneously present.</Abstract> <Access xmlns=\"http://purl.org/coar/access_right\" > </Access> </Publication>"],"cris:virtual.author":["Etta, Dheeraj"],"cris:virtualsource.collection":["5893a6ea-7af3-41d7-abc6-04bcd26ab5df"],"dc:contributor.chair":["Afridi, Khurram"],"dc:contributor.committeemember":["Monticone, Francesco","Molnar, Alyosha"],"dc:creator":["Etta, Dheeraj"],"dc:date.accessioned":["2026-08-26T19:53:04Z"],"dc:date.available":["2026-08-26T19:53:04Z"],"dc:date.issued":["2026-05"],"dc:description":["174 pages"],"dc:description.abstract":["Realizing compact power converters requires operation at high switching frequencies. However, this introduces challenges in maintaining soft switching over wide operating conditions and enabling scalable high-power operation without compromising efficiency. This thesis develops circuit architectures, control strategies, and design methodologies to address these challenges in high-frequency power converters, with applications in multi-MHz wireless power transfer (WPT) and wide-operating-range wired chargers. First, an auxiliary zero-voltage-switching (ZVS) inductor-based approach is developed for multi-MHz capacitive WPT systems. It achieves ZVS without requiring large inductive phase shifts from the resonant matching network, significantly reducing circulating currents. Experimental validation using a 6.78-MHz, 12-cm air-gap prototype demonstrates 5% higher efficiency and 32% higher power transfer compared to the conventional ZVS approach. Next, a low-loss multi-MHz magnetic-core toroidal inductor is developed to replace bulky air-core matching network inductors in capacitive WPT systems. Using NiZn ferrite, quasi-distributed air gaps, and interleaved foil windings, a 13.56-MHz, 5-μH prototype inductor operating at 20 A peak achieves a quality factor of ~1190 with a 4× reduction in volume compared to air-core counterparts. To address power scaling limitations in multi-MHz capacitive WPT systems, scalable power architectures are developed using passive power combining networks, along with device-level paralleling enabled by a highly symmetric PCB layout. These techniques are experimentally validated through multi-kilowatt prototypes, culminating in the highest-power capacitive WPT system demonstrated to date at 44.3 kW, achieving 85.2% peak dc-to-dc efficiency and 132.9 kW/m² power transfer density. For wired charging applications, a fully soft-switched impedance control network (ICN)-based single-stage ac–dc converter is developed. An auxiliary ZVS approach combined with phase-shift control enables soft-switching of all high-frequency transistors while achieving power factor correction (PFC) and output regulation. A reconfigurable active-bridge architecture further improves the ICN converter performance over wide operating ranges. A 2-kW universal-input ICN-based ac–dc prototype with a 200 V to 500 V output range is built and tested, achieving a power density of 104 W/in³ and a peak efficiency of 94.4%. The ICN architecture is further extended to multi-output single-stage ac–dc converters using a multi-winding transformer and a generalized phase-shift control strategy, enabling simultaneous regulation of multiple isolated outputs while maintaining soft-switching and PFC operation. A 3.3-kW universal-input dual-output prototype, with each output port supporting 24 V to 96 V and up to 1.65 kW, is built and tested, achieving a power density of 162 W/in³ and a peak efficiency of 94.8%. Finally, a modeling framework is developed to analyze soft-switching behavior in resonant converters operating under beat-frequency modulation, where multiple switching frequencies are simultaneously present."],"dc:description.collection":["Cornell Theses and Dissertations"],"dc:format.mimetype":["application/pdf"],"dc:identifier.doi":["https://doi.org/10.7298/k122-3757"],"dc:identifier.other":["Etta_cornellgrad_0058F_15539","https://www.proquest.com/LegacyDocView/DISSNUM/32674018"],"dc:identifier.uri":["https://hdl.handle.net/1813/126655"],"dc:language.iso":["en"],"dc:subject":["Chargers","Impedance Control Network","Multi-MHz","Power Scaling","Soft-Switching","Wireless Power Transfer"],"dcterms:license":["https://hdl.handle.net/1813/59810.2"],"dc:title":["ARCHITECTURES FOR SOFT-SWITCHING AND POWER SCALING OF POWER CONVERTERS"],"dc:type":["dissertation or thesis"],"dspace:entity.type":["Publication"],"others:access_status":["open.access"],"thesis:degree_discipline":["Electrical and Computer Engineering"],"thesis:degree_level":["Doctor of Philosophy"],"thesis:degree_name":["Ph. D., Electrical and Computer Engineering"],"thesis:institution_name":["Cornell University"]},"updated_at":"2026-11-19T03:13:28Z"}