{"id":{"repo_id":"cornell","oai_identifier":"oai:ecommons.cornell.edu:1813/198"},"canonical_url":"https://search.ndltd.org/etd/cornell/oai:ecommons.cornell.edu:1813/198","repository":{"repo_id":"cornell","name":"Cornell University","base_url":"https://ecommons.cornell.edu/server/oai/request"},"display":{"title":"Modeling Infrared and Combination Infrared-Microwave Heating of Foods in an Oven","abstract":"A quantitative, model-based understanding of heat exchange in infrared and combined infrared-microwave heating of food inside an oven is developed. The research is divided into three parts: measurement of optical properties, radiative heat transfer analysis and combined microwave-radiative heat transfer analysis. Optical properties of reflectance, absorptance and transmittance in a potato tissue are measured as a function of wavelength, using a spectroradiometer. Penetration of energy is higher for halogen lamps that emit in the near- and mid-infrared range, compared to ceramic rods that emit mostly in the far infrared range. Reflectance in the near infrared range increases with moisture content of the food, thus decreasing the energy coupled. Surface structure has significant influence on the optical properties. A 3-D radiative heat exchange model of an oven-food system is developed using a commercial finite-element package. The air in the oven is assumed transparent to the radiation. Heat conduction is assumed in the entire oven (food and air) for the short duration. The wavelength dependence of emissivity (non-gray surface) is found to significantly affect the surface radiative flux and the use of a non-gray model is recommended for such materials, although simplification of the emissivity variation is required to keep the computation time reasonable. Lowering food surface emissivity reduces the radiative flux that is absorbed by the food surface. Reducing oven wall emissivities increase the radiative flux on the food surface. The location of the radiative heat source in the oven as well as placement of the food relative to the heat source were found to have significant influence on the radiative heat flux over the food surface. To add microwave heating, Maxwell's equations of electromagnetics were solved for the same cavity using separate finite element software and the volumetric heat generation, in the food, obtained from this model was input to the radiative heat transfer model, thus coupling them. Using measures such as mean temperature rise and the standard deviation of temperatures, it was demonstrated that combination heating leads to more uniform heating, without compromising the speed of heating.","abstract_html":"A quantitative, model-based understanding of heat exchange in infrared and combined infrared-microwave heating of food inside an oven is developed. The research is divided into three parts: measurement of optical properties, radiative heat transfer analysis and combined microwave-radiative heat transfer analysis. Optical properties of reflectance, absorptance and transmittance in a potato tissue are measured as a function of wavelength, using a spectroradiometer. Penetration of energy is higher for halogen lamps that emit in the near- and mid-infrared range, compared to ceramic rods that emit mostly in the far infrared range. Reflectance in the near infrared range increases with moisture content of the food, thus decreasing the energy coupled. Surface structure has significant influence on the optical properties. A 3-D radiative heat exchange model of an oven-food system is developed using a commercial finite-element package. The air in the oven is assumed transparent to the radiation. Heat conduction is assumed in the entire oven (food and air) for the short duration. The wavelength dependence of emissivity (non-gray surface) is found to significantly affect the surface radiative flux and the use of a non-gray model is recommended for such materials, although simplification of the emissivity variation is required to keep the computation time reasonable. Lowering food surface emissivity reduces the radiative flux that is absorbed by the food surface. Reducing oven wall emissivities increase the radiative flux on the food surface. The location of the radiative heat source in the oven as well as placement of the food relative to the heat source were found to have significant influence on the radiative heat flux over the food surface. To add microwave heating, Maxwell&#x27;s equations of electromagnetics were solved for the same cavity using separate finite element software and the volumetric heat generation, in the food, obtained from this model was input to the radiative heat transfer model, thus coupling them. Using measures such as mean temperature rise and the standard deviation of temperatures, it was demonstrated that combination heating leads to more uniform heating, without compromising the speed of heating.","abstract_has_math":false,"creators":["Frangipani Almeida, Marialuci"],"institution":null,"degree_name":null,"degree_level":null,"degree_discipline":null,"degree_department":null,"school":null,"contributors":[],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2004,"date_issued":"2004-11-01T13:17:45Z","date_published":"2004-11-01T13:17:45Z","updated_at":"2026-11-19T03:14:48Z","subjects":["infrared heating of foods, halogen heating of foods, combination heating of foods, combination oven, halogen oven, infrared oven, optical properties, infrared and microwave oven, infrared and microwave heating of foods, near-infared heating of foods, moisture dependent optical properties"],"languages":["en_US"],"rights":[],"rights_urls":[],"identifier_entries":[{"key":"dc:identifier.bibid","label":"Dc Identifier Bibid","values":["6475956"],"render_values":[{"text":"6475956","href":null,"code":true}]}],"person_identifier_entries":[]},"links":{"outbound_url":"https://hdl.handle.net/1813/198","outbound_label":"Handle","outbound_source":"dc:identifier.uri","record_url":"https://hdl.handle.net/1813/198","record_label":"Repository record","record_kind":"handle","record_source":"dc:identifier.uri","download_url":null,"download_label":null,"download_source":null,"access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://ecommons.cornell.edu/server/oai/request?verb=GetRecord&metadataPrefix=dim&identifier=oai%3Aecommons.cornell.edu%3A1813%2F198","prefix":"dim"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:creator","label":"Author","values":["Frangipani Almeida, Marialuci"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.accessioned","label":"Dc Date Accessioned","values":["2004-11-01T13:17:45Z"]},{"key":"dc:date.available","label":"Dc Date Available","values":["2004-11-01T13:17:45Z"]},{"key":"dc:date.issued","label":"Date","values":["2004-11-01T13:17:45Z"]},{"key":"dc:type","label":"Dc Type","values":["dissertation or thesis"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["infrared heating of foods, halogen heating of foods, combination heating of foods, combination oven, halogen oven, infrared oven, optical properties, infrared and microwave oven, infrared and microwave heating of foods, near-infared heating of foods, moisture dependent optical properties"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.iso","label":"Language (ISO)","values":["en_US"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.bibid","label":"Dc Identifier Bibid","values":["6475956"]},{"key":"dc:identifier.uri","label":"Identifier URI","values":["https://hdl.handle.net/1813/198"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"cerif:openaire","label":"Cerif Openaire","values":["<Publication xmlns=\"https://www.openaire.eu/cerif-profile/1.1/\" id=\"4f7a5d24-0959-4859-9cdc-65e7913c31d7\"> <Type xmlns=\"https://www.openaire.eu/cerif-profile/vocab/COAR_Publication_Types\">http://purl.org/coar/resource_type/c_1843</Type> <Language>en_US</Language> <Title>Modeling Infrared and Combination Infrared-Microwave Heating of Foods in an Oven</Title> <PublishedIn> <Publication> </Publication> </PublishedIn> <PublicationDate>2004-11-01T13:17:45Z</PublicationDate> <Authors> <Author> <DisplayName>Frangipani Almeida, Marialuci</DisplayName> <Affiliation> <OrgUnit> </OrgUnit> </Affiliation> </Author> </Authors> <Editors> </Editors> <Publishers> <Publisher> <OrgUnit /> </Publisher> </Publishers> <Keyword>infrared heating of foods, halogen heating of foods, combination heating of foods, combination oven, halogen oven, infrared oven, optical properties, infrared and microwave oven, infrared and microwave heating of foods, near-infared heating of foods, moisture dependent optical properties</Keyword> <Abstract>A quantitative, model-based understanding of heat exchange in infrared and combined infrared-microwave heating of food inside an oven is developed. The research is divided into three parts: measurement of optical properties, radiative heat transfer analysis and combined microwave-radiative heat transfer analysis. Optical properties of reflectance, absorptance and transmittance in a potato tissue are measured as a function of wavelength, using a spectroradiometer. Penetration of energy is higher for halogen lamps that emit in the near- and mid-infrared range, compared to ceramic rods that emit mostly in the far infrared range. Reflectance in the near infrared range increases with moisture content of the food, thus decreasing the energy coupled. Surface structure has significant influence on the optical properties. A 3-D radiative heat exchange model of an oven-food system is developed using a commercial finite-element package. The air in the oven is assumed transparent to the radiation. Heat conduction is assumed in the entire oven (food and air) for the short duration. The wavelength dependence of emissivity (non-gray surface) is found to significantly affect the surface radiative flux and the use of a non-gray model is recommended for such materials, although simplification of the emissivity variation is required to keep the computation time reasonable. Lowering food surface emissivity reduces the radiative flux that is absorbed by the food surface. Reducing oven wall emissivities increase the radiative flux on the food surface. The location of the radiative heat source in the oven as well as placement of the food relative to the heat source were found to have significant influence on the radiative heat flux over the food surface. To add microwave heating, Maxwell's equations of electromagnetics were solved for the same cavity using separate finite element software and the volumetric heat generation, in the food, obtained from this model was input to the radiative heat transfer model, thus coupling them. Using measures such as mean temperature rise and the standard deviation of temperatures, it was demonstrated that combination heating leads to more uniform heating, without compromising the speed of heating.</Abstract> <Access xmlns=\"http://purl.org/coar/access_right\" > </Access> </Publication>"]},{"key":"cris:virtual.author","label":"Cris Virtual Author","values":["Frangipani Almeida, Marialuci"]},{"key":"cris:virtualsource.collection","label":"Cris Virtualsource Collection","values":["5893a6ea-7af3-41d7-abc6-04bcd26ab5df"]},{"key":"dc:description","label":"Description","values":["Fifth Chapter \"Combined Microwave and Infared Heating of Foods\" is a collaboration chapter written with Srikanth Geedipalli."]},{"key":"dc:description.abstract","label":"Abstract","values":["A quantitative, model-based understanding of heat exchange in infrared and combined infrared-microwave heating of food inside an oven is developed. The research is divided into three parts: measurement of optical properties, radiative heat transfer analysis and combined microwave-radiative heat transfer analysis. Optical properties of reflectance, absorptance and transmittance in a potato tissue are measured as a function of wavelength, using a spectroradiometer. Penetration of energy is higher for halogen lamps that emit in the near- and mid-infrared range, compared to ceramic rods that emit mostly in the far infrared range. Reflectance in the near infrared range increases with moisture content of the food, thus decreasing the energy coupled. Surface structure has significant influence on the optical properties. A 3-D radiative heat exchange model of an oven-food system is developed using a commercial finite-element package. The air in the oven is assumed transparent to the radiation. Heat conduction is assumed in the entire oven (food and air) for the short duration. The wavelength dependence of emissivity (non-gray surface) is found to significantly affect the surface radiative flux and the use of a non-gray model is recommended for such materials, although simplification of the emissivity variation is required to keep the computation time reasonable. Lowering food surface emissivity reduces the radiative flux that is absorbed by the food surface. Reducing oven wall emissivities increase the radiative flux on the food surface. The location of the radiative heat source in the oven as well as placement of the food relative to the heat source were found to have significant influence on the radiative heat flux over the food surface. To add microwave heating, Maxwell's equations of electromagnetics were solved for the same cavity using separate finite element software and the volumetric heat generation, in the food, obtained from this model was input to the radiative heat transfer model, thus coupling them. Using measures such as mean temperature rise and the standard deviation of temperatures, it was demonstrated that combination heating leads to more uniform heating, without compromising the speed of heating."]},{"key":"dc:description.collection","label":"Dc Description Collection","values":["Cornell Theses and Dissertations"]},{"key":"dc:format.extent","label":"Dc Format Extent","values":["1994760 bytes"]},{"key":"dc:format.mimetype","label":"Dc Format Mimetype","values":["application/pdf"]},{"key":"dc:title","label":"Title","values":["Modeling Infrared and Combination Infrared-Microwave Heating of Foods in an Oven"]},{"key":"dspace:entity.type","label":"Dspace Entity Type","values":["Publication"]},{"key":"others:access_status","label":"Others Access Status","values":["open.access"]}]}],"canonical_facts":{"cerif:openaire":["<Publication xmlns=\"https://www.openaire.eu/cerif-profile/1.1/\" id=\"4f7a5d24-0959-4859-9cdc-65e7913c31d7\"> <Type xmlns=\"https://www.openaire.eu/cerif-profile/vocab/COAR_Publication_Types\">http://purl.org/coar/resource_type/c_1843</Type> <Language>en_US</Language> <Title>Modeling Infrared and Combination Infrared-Microwave Heating of Foods in an Oven</Title> <PublishedIn> <Publication> </Publication> </PublishedIn> <PublicationDate>2004-11-01T13:17:45Z</PublicationDate> <Authors> <Author> <DisplayName>Frangipani Almeida, Marialuci</DisplayName> <Affiliation> <OrgUnit> </OrgUnit> </Affiliation> </Author> </Authors> <Editors> </Editors> <Publishers> <Publisher> <OrgUnit /> </Publisher> </Publishers> <Keyword>infrared heating of foods, halogen heating of foods, combination heating of foods, combination oven, halogen oven, infrared oven, optical properties, infrared and microwave oven, infrared and microwave heating of foods, near-infared heating of foods, moisture dependent optical properties</Keyword> <Abstract>A quantitative, model-based understanding of heat exchange in infrared and combined infrared-microwave heating of food inside an oven is developed. The research is divided into three parts: measurement of optical properties, radiative heat transfer analysis and combined microwave-radiative heat transfer analysis. Optical properties of reflectance, absorptance and transmittance in a potato tissue are measured as a function of wavelength, using a spectroradiometer. Penetration of energy is higher for halogen lamps that emit in the near- and mid-infrared range, compared to ceramic rods that emit mostly in the far infrared range. Reflectance in the near infrared range increases with moisture content of the food, thus decreasing the energy coupled. Surface structure has significant influence on the optical properties. A 3-D radiative heat exchange model of an oven-food system is developed using a commercial finite-element package. The air in the oven is assumed transparent to the radiation. Heat conduction is assumed in the entire oven (food and air) for the short duration. The wavelength dependence of emissivity (non-gray surface) is found to significantly affect the surface radiative flux and the use of a non-gray model is recommended for such materials, although simplification of the emissivity variation is required to keep the computation time reasonable. Lowering food surface emissivity reduces the radiative flux that is absorbed by the food surface. Reducing oven wall emissivities increase the radiative flux on the food surface. The location of the radiative heat source in the oven as well as placement of the food relative to the heat source were found to have significant influence on the radiative heat flux over the food surface. To add microwave heating, Maxwell's equations of electromagnetics were solved for the same cavity using separate finite element software and the volumetric heat generation, in the food, obtained from this model was input to the radiative heat transfer model, thus coupling them. Using measures such as mean temperature rise and the standard deviation of temperatures, it was demonstrated that combination heating leads to more uniform heating, without compromising the speed of heating.</Abstract> <Access xmlns=\"http://purl.org/coar/access_right\" > </Access> </Publication>"],"cris:virtual.author":["Frangipani Almeida, Marialuci"],"cris:virtualsource.collection":["5893a6ea-7af3-41d7-abc6-04bcd26ab5df"],"dc:creator":["Frangipani Almeida, Marialuci"],"dc:date.accessioned":["2004-11-01T13:17:45Z"],"dc:date.available":["2004-11-01T13:17:45Z"],"dc:date.issued":["2004-11-01T13:17:45Z"],"dc:description":["Fifth Chapter \"Combined Microwave and Infared Heating of Foods\" is a collaboration chapter written with Srikanth Geedipalli."],"dc:description.abstract":["A quantitative, model-based understanding of heat exchange in infrared and combined infrared-microwave heating of food inside an oven is developed. The research is divided into three parts: measurement of optical properties, radiative heat transfer analysis and combined microwave-radiative heat transfer analysis. Optical properties of reflectance, absorptance and transmittance in a potato tissue are measured as a function of wavelength, using a spectroradiometer. Penetration of energy is higher for halogen lamps that emit in the near- and mid-infrared range, compared to ceramic rods that emit mostly in the far infrared range. Reflectance in the near infrared range increases with moisture content of the food, thus decreasing the energy coupled. Surface structure has significant influence on the optical properties. A 3-D radiative heat exchange model of an oven-food system is developed using a commercial finite-element package. The air in the oven is assumed transparent to the radiation. Heat conduction is assumed in the entire oven (food and air) for the short duration. The wavelength dependence of emissivity (non-gray surface) is found to significantly affect the surface radiative flux and the use of a non-gray model is recommended for such materials, although simplification of the emissivity variation is required to keep the computation time reasonable. Lowering food surface emissivity reduces the radiative flux that is absorbed by the food surface. Reducing oven wall emissivities increase the radiative flux on the food surface. The location of the radiative heat source in the oven as well as placement of the food relative to the heat source were found to have significant influence on the radiative heat flux over the food surface. To add microwave heating, Maxwell's equations of electromagnetics were solved for the same cavity using separate finite element software and the volumetric heat generation, in the food, obtained from this model was input to the radiative heat transfer model, thus coupling them. Using measures such as mean temperature rise and the standard deviation of temperatures, it was demonstrated that combination heating leads to more uniform heating, without compromising the speed of heating."],"dc:description.collection":["Cornell Theses and Dissertations"],"dc:format.extent":["1994760 bytes"],"dc:format.mimetype":["application/pdf"],"dc:identifier.bibid":["6475956"],"dc:identifier.uri":["https://hdl.handle.net/1813/198"],"dc:language.iso":["en_US"],"dc:subject":["infrared heating of foods, halogen heating of foods, combination heating of foods, combination oven, halogen oven, infrared oven, optical properties, infrared and microwave oven, infrared and microwave heating of foods, near-infared heating of foods, moisture dependent optical properties"],"dc:title":["Modeling Infrared and Combination Infrared-Microwave Heating of Foods in an Oven"],"dc:type":["dissertation or thesis"],"dspace:entity.type":["Publication"],"others:access_status":["open.access"]},"updated_at":"2026-11-19T03:14:48Z"}