{"id":{"repo_id":"cornell","oai_identifier":"oai:ecommons.cornell.edu:1813/33546"},"canonical_url":"https://search.ndltd.org/etd/cornell/oai:ecommons.cornell.edu:1813/33546","repository":{"repo_id":"cornell","name":"Cornell University","base_url":"https://ecommons.cornell.edu/server/oai/request"},"display":{"title":"Elastodynaimc Systems: Ornithopters And Power Harvesting","abstract":"Ornithopters are air vehicles that fly using flapping wings as lift and propulsion. The study of ornithopter flight dynamics is complicated by time-varying aerodynamics and no dynamic steady state. Using quasi-steady aerodynamics, a Newton-Euler dynamic model of ornithopter flight is utilized to study ornithopter stability and flight dynamics. Floquet analysis is used to analyze these periodic steady flight regimes. This model is then used to analyze and synthesize stabilizing controllers for forward flight and hovering flight. A novel controller is a discrete-time periodic linear quadratic regulator, useful for steady periodic flight dynamics. The model is exploited further to analyze and optimize a nonsteady maneuver: to connect forward flight to hovering flight midflight. Finally, an ornithoptic dirigible is designed and constructed in order to study flapping-wing flight dynamics without requiring the wings to provide lift. The blimp's dynamic modes are observed using a motion capture system. Energy harvesting using cantilevered piezoelectric bimorph vibrators has potential to generate power for long-endurance, low power devices. The geometry of these bimorph vibrators is modeled using Euler-Bernoulli vibration models and the width profile is optimized to produce the highest power transduction. It is found that beams tapering toward the tip are capable of withstanding higher strain, and thus can be subject to stronger vibration at a smaller mass. The Timoshenko model of piezoelectric beam vibration is then derived and compared to the Euler-Bernoulli model and found to be more accurate at higher frequencies and at lower length-to-width ratios.","abstract_html":"Ornithopters are air vehicles that fly using flapping wings as lift and propulsion. The study of ornithopter flight dynamics is complicated by time-varying aerodynamics and no dynamic steady state. Using quasi-steady aerodynamics, a Newton-Euler dynamic model of ornithopter flight is utilized to study ornithopter stability and flight dynamics. Floquet analysis is used to analyze these periodic steady flight regimes. This model is then used to analyze and synthesize stabilizing controllers for forward flight and hovering flight. A novel controller is a discrete-time periodic linear quadratic regulator, useful for steady periodic flight dynamics. The model is exploited further to analyze and optimize a nonsteady maneuver: to connect forward flight to hovering flight midflight. Finally, an ornithoptic dirigible is designed and constructed in order to study flapping-wing flight dynamics without requiring the wings to provide lift. The blimp&#x27;s dynamic modes are observed using a motion capture system. Energy harvesting using cantilevered piezoelectric bimorph vibrators has potential to generate power for long-endurance, low power devices. The geometry of these bimorph vibrators is modeled using Euler-Bernoulli vibration models and the width profile is optimized to produce the highest power transduction. It is found that beams tapering toward the tip are capable of withstanding higher strain, and thus can be subject to stronger vibration at a smaller mass. The Timoshenko model of piezoelectric beam vibration is then derived and compared to the Euler-Bernoulli model and found to be more accurate at higher frequencies and at lower length-to-width ratios.","abstract_has_math":false,"creators":["Dietl, John"],"institution":"Cornell University","degree_name":"Ph. D., Mechanical Engineering","degree_level":"Doctor of Philosophy","degree_discipline":"Mechanical Engineering","degree_department":null,"school":null,"contributors":[],"advisors":[],"committee_chairs":["Garcia, Ephrahim"],"committee_members":["Peck, Mason","Lipson, Hod"],"year":2011,"date_issued":"2011-01-31","date_published":"2011-01-31","updated_at":"2026-11-19T03:15:57Z","subjects":["Ornithopter","Power Harvesting"],"languages":["en_US"],"rights":[],"rights_urls":[],"identifier_entries":[{"key":"dc:identifier.bibid","label":"Dc Identifier Bibid","values":["8213841"],"render_values":[{"text":"8213841","href":null,"code":true}]}],"person_identifier_entries":[]},"links":{"outbound_url":"https://hdl.handle.net/1813/33546","outbound_label":"Handle","outbound_source":"dc:identifier.uri","record_url":"https://hdl.handle.net/1813/33546","record_label":"Repository record","record_kind":"handle","record_source":"dc:identifier.uri","download_url":null,"download_label":null,"download_source":null,"access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://ecommons.cornell.edu/server/oai/request?verb=GetRecord&metadataPrefix=dim&identifier=oai%3Aecommons.cornell.edu%3A1813%2F33546","prefix":"dim"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.chair","label":"Chair","values":["Garcia, Ephrahim"]},{"key":"dc:contributor.committeemember","label":"Committee Member","values":["Peck, Mason","Lipson, Hod"]},{"key":"dc:creator","label":"Author","values":["Dietl, John"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.accessioned","label":"Dc Date Accessioned","values":["2013-07-23T18:23:41Z"]},{"key":"dc:date.available","label":"Dc Date Available","values":["2016-06-01T06:15:44Z"]},{"key":"dc:date.issued","label":"Date","values":["2011-01-31"]},{"key":"dc:type","label":"Dc Type","values":["dissertation or thesis"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Mechanical Engineering"]},{"key":"thesis:degree_level","label":"Degree Level","values":["Doctor of Philosophy"]},{"key":"thesis:degree_name","label":"Degree Name","values":["Ph. D., Mechanical Engineering"]},{"key":"thesis:institution_name","label":"Thesis Institution Name","values":["Cornell University"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["Ornithopter","Power Harvesting"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.iso","label":"Language (ISO)","values":["en_US"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.bibid","label":"Dc Identifier Bibid","values":["8213841"]},{"key":"dc:identifier.uri","label":"Identifier URI","values":["https://hdl.handle.net/1813/33546"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"cerif:openaire","label":"Cerif Openaire","values":["<Publication xmlns=\"https://www.openaire.eu/cerif-profile/1.1/\" id=\"522900b9-73ba-4e12-bbed-abf7573d33b7\"> <Type xmlns=\"https://www.openaire.eu/cerif-profile/vocab/COAR_Publication_Types\">http://purl.org/coar/resource_type/c_1843</Type> <Language>en_US</Language> <Title>Elastodynaimc Systems: Ornithopters And Power Harvesting</Title> <PublishedIn> <Publication> </Publication> </PublishedIn> <PublicationDate>2011-01-31</PublicationDate> <Authors> <Author> <DisplayName>Dietl, John</DisplayName> <Affiliation> <OrgUnit> </OrgUnit> </Affiliation> </Author> </Authors> <Editors> </Editors> <Publishers> <Publisher> <OrgUnit /> </Publisher> </Publishers> <Keyword>Ornithopter</Keyword> <Keyword>Power Harvesting</Keyword> <Abstract>Ornithopters are air vehicles that fly using flapping wings as lift and propulsion. The study of ornithopter flight dynamics is complicated by time-varying aerodynamics and no dynamic steady state. Using quasi-steady aerodynamics, a Newton-Euler dynamic model of ornithopter flight is utilized to study ornithopter stability and flight dynamics. Floquet analysis is used to analyze these periodic steady flight regimes. This model is then used to analyze and synthesize stabilizing controllers for forward flight and hovering flight. A novel controller is a discrete-time periodic linear quadratic regulator, useful for steady periodic flight dynamics. The model is exploited further to analyze and optimize a nonsteady maneuver: to connect forward flight to hovering flight midflight. Finally, an ornithoptic dirigible is designed and constructed in order to study flapping-wing flight dynamics without requiring the wings to provide lift. The blimp's dynamic modes are observed using a motion capture system. Energy harvesting using cantilevered piezoelectric bimorph vibrators has potential to generate power for long-endurance, low power devices. The geometry of these bimorph vibrators is modeled using Euler-Bernoulli vibration models and the width profile is optimized to produce the highest power transduction. It is found that beams tapering toward the tip are capable of withstanding higher strain, and thus can be subject to stronger vibration at a smaller mass. The Timoshenko model of piezoelectric beam vibration is then derived and compared to the Euler-Bernoulli model and found to be more accurate at higher frequencies and at lower length-to-width ratios.</Abstract> <Access xmlns=\"http://purl.org/coar/access_right\" > </Access> </Publication>"]},{"key":"cris:virtual.author","label":"Cris Virtual Author","values":["Dietl, John"]},{"key":"cris:virtualsource.collection","label":"Cris Virtualsource Collection","values":["5893a6ea-7af3-41d7-abc6-04bcd26ab5df"]},{"key":"dc:description.abstract","label":"Abstract","values":["Ornithopters are air vehicles that fly using flapping wings as lift and propulsion. The study of ornithopter flight dynamics is complicated by time-varying aerodynamics and no dynamic steady state. Using quasi-steady aerodynamics, a Newton-Euler dynamic model of ornithopter flight is utilized to study ornithopter stability and flight dynamics. Floquet analysis is used to analyze these periodic steady flight regimes. This model is then used to analyze and synthesize stabilizing controllers for forward flight and hovering flight. A novel controller is a discrete-time periodic linear quadratic regulator, useful for steady periodic flight dynamics. The model is exploited further to analyze and optimize a nonsteady maneuver: to connect forward flight to hovering flight midflight. Finally, an ornithoptic dirigible is designed and constructed in order to study flapping-wing flight dynamics without requiring the wings to provide lift. The blimp's dynamic modes are observed using a motion capture system. Energy harvesting using cantilevered piezoelectric bimorph vibrators has potential to generate power for long-endurance, low power devices. The geometry of these bimorph vibrators is modeled using Euler-Bernoulli vibration models and the width profile is optimized to produce the highest power transduction. It is found that beams tapering toward the tip are capable of withstanding higher strain, and thus can be subject to stronger vibration at a smaller mass. The Timoshenko model of piezoelectric beam vibration is then derived and compared to the Euler-Bernoulli model and found to be more accurate at higher frequencies and at lower length-to-width ratios."]},{"key":"dc:description.collection","label":"Dc Description Collection","values":["Cornell Theses and Dissertations"]},{"key":"dc:format.mimetype","label":"Dc Format Mimetype","values":["application/pdf"]},{"key":"dc:title","label":"Title","values":["Elastodynaimc Systems: Ornithopters And Power Harvesting"]},{"key":"dspace:entity.type","label":"Dspace Entity Type","values":["Publication"]},{"key":"others:access_status","label":"Others Access Status","values":["open.access"]}]}],"canonical_facts":{"cerif:openaire":["<Publication xmlns=\"https://www.openaire.eu/cerif-profile/1.1/\" id=\"522900b9-73ba-4e12-bbed-abf7573d33b7\"> <Type xmlns=\"https://www.openaire.eu/cerif-profile/vocab/COAR_Publication_Types\">http://purl.org/coar/resource_type/c_1843</Type> <Language>en_US</Language> <Title>Elastodynaimc Systems: Ornithopters And Power Harvesting</Title> <PublishedIn> <Publication> </Publication> </PublishedIn> <PublicationDate>2011-01-31</PublicationDate> <Authors> <Author> <DisplayName>Dietl, John</DisplayName> <Affiliation> <OrgUnit> </OrgUnit> </Affiliation> </Author> </Authors> <Editors> </Editors> <Publishers> <Publisher> <OrgUnit /> </Publisher> </Publishers> <Keyword>Ornithopter</Keyword> <Keyword>Power Harvesting</Keyword> <Abstract>Ornithopters are air vehicles that fly using flapping wings as lift and propulsion. The study of ornithopter flight dynamics is complicated by time-varying aerodynamics and no dynamic steady state. Using quasi-steady aerodynamics, a Newton-Euler dynamic model of ornithopter flight is utilized to study ornithopter stability and flight dynamics. Floquet analysis is used to analyze these periodic steady flight regimes. This model is then used to analyze and synthesize stabilizing controllers for forward flight and hovering flight. A novel controller is a discrete-time periodic linear quadratic regulator, useful for steady periodic flight dynamics. The model is exploited further to analyze and optimize a nonsteady maneuver: to connect forward flight to hovering flight midflight. Finally, an ornithoptic dirigible is designed and constructed in order to study flapping-wing flight dynamics without requiring the wings to provide lift. The blimp's dynamic modes are observed using a motion capture system. Energy harvesting using cantilevered piezoelectric bimorph vibrators has potential to generate power for long-endurance, low power devices. The geometry of these bimorph vibrators is modeled using Euler-Bernoulli vibration models and the width profile is optimized to produce the highest power transduction. It is found that beams tapering toward the tip are capable of withstanding higher strain, and thus can be subject to stronger vibration at a smaller mass. The Timoshenko model of piezoelectric beam vibration is then derived and compared to the Euler-Bernoulli model and found to be more accurate at higher frequencies and at lower length-to-width ratios.</Abstract> <Access xmlns=\"http://purl.org/coar/access_right\" > </Access> </Publication>"],"cris:virtual.author":["Dietl, John"],"cris:virtualsource.collection":["5893a6ea-7af3-41d7-abc6-04bcd26ab5df"],"dc:contributor.chair":["Garcia, Ephrahim"],"dc:contributor.committeemember":["Peck, Mason","Lipson, Hod"],"dc:creator":["Dietl, John"],"dc:date.accessioned":["2013-07-23T18:23:41Z"],"dc:date.available":["2016-06-01T06:15:44Z"],"dc:date.issued":["2011-01-31"],"dc:description.abstract":["Ornithopters are air vehicles that fly using flapping wings as lift and propulsion. The study of ornithopter flight dynamics is complicated by time-varying aerodynamics and no dynamic steady state. Using quasi-steady aerodynamics, a Newton-Euler dynamic model of ornithopter flight is utilized to study ornithopter stability and flight dynamics. Floquet analysis is used to analyze these periodic steady flight regimes. This model is then used to analyze and synthesize stabilizing controllers for forward flight and hovering flight. A novel controller is a discrete-time periodic linear quadratic regulator, useful for steady periodic flight dynamics. The model is exploited further to analyze and optimize a nonsteady maneuver: to connect forward flight to hovering flight midflight. Finally, an ornithoptic dirigible is designed and constructed in order to study flapping-wing flight dynamics without requiring the wings to provide lift. The blimp's dynamic modes are observed using a motion capture system. Energy harvesting using cantilevered piezoelectric bimorph vibrators has potential to generate power for long-endurance, low power devices. The geometry of these bimorph vibrators is modeled using Euler-Bernoulli vibration models and the width profile is optimized to produce the highest power transduction. It is found that beams tapering toward the tip are capable of withstanding higher strain, and thus can be subject to stronger vibration at a smaller mass. The Timoshenko model of piezoelectric beam vibration is then derived and compared to the Euler-Bernoulli model and found to be more accurate at higher frequencies and at lower length-to-width ratios."],"dc:description.collection":["Cornell Theses and Dissertations"],"dc:format.mimetype":["application/pdf"],"dc:identifier.bibid":["8213841"],"dc:identifier.uri":["https://hdl.handle.net/1813/33546"],"dc:language.iso":["en_US"],"dc:subject":["Ornithopter","Power Harvesting"],"dc:title":["Elastodynaimc Systems: Ornithopters And Power Harvesting"],"dc:type":["dissertation or thesis"],"dspace:entity.type":["Publication"],"others:access_status":["open.access"],"thesis:degree_discipline":["Mechanical Engineering"],"thesis:degree_level":["Doctor of Philosophy"],"thesis:degree_name":["Ph. D., Mechanical Engineering"],"thesis:institution_name":["Cornell University"]},"updated_at":"2026-11-19T03:15:57Z"}