{"id":{"repo_id":"cornell","oai_identifier":"oai:ecommons.cornell.edu:1813/33652"},"canonical_url":"https://search.ndltd.org/etd/cornell/oai:ecommons.cornell.edu:1813/33652","repository":{"repo_id":"cornell","name":"Cornell University","base_url":"https://ecommons.cornell.edu/server/oai/request"},"display":{"title":"Solution-Processable Solar Cell Technologies","abstract":"The high cost of production of solar panels has prevented the widespread adoption of solar energy. A possible solution is to pursue solution-based solar cell technologies, since they can enable a low-cost and high-throughput manufacturing process. Both organic semiconductors and inorganic nanocrystals have emerged as promising solution-processable materials for solar cells. In this dissertation, I present my work on the investigation of both classes of materials for solar cell applications. Organic photovoltaics consist of donor and acceptor organic semiconductors. The mechanism of charge transfer between the donor poly(3-hexylthiophene) (P3HT) and acceptor C60 was studied by incorporating an inter-layer into the bilayer solar cell. Charge transfer was shown to take place in a two-step process whereby energy transfer of the photo-generated excitons in P3HT to C60 is followed by a backward charge transfer step to P3HT. Novel ways to process these materials are also investigated. Solar cells from P3HT and a fullerene derivative, phenyl C61-butyric acid methyl ester (PCBM) were fabricated by spray-deposition. Good power conversion efficiencies above 2 % were demonstrated, indicating the viability of spray deposition as a fabrication method. In a separate effort, a novel fluorinated resorcinarene photoresist was used to photolithographically pattern solar cells based on a blend of P3HT and PCBM for highvoltage applications. A 15 mm array of 300 solar cells connected in series achieved an open circuit voltage (VOC) of 90 volts. Three new classes of materials for organic solar cell acceptors are presented, namely pentacenes, hexacenes, and anthradithiophenes. Solar cells based on P3HT and pentacenes gave efficiencies as high as 1.2 %. The hexacenes have the lowest bandgap, enabling hexacene-based solar cells to have photocurrent response up to 800 nm. The anthradithiophene-based solar cells achieved the highest VOC approaching 1.1 Volts, and decent efficiencies of around 0.8 %. Finally, a facile alcothermal method for the synthesis of dispersible CuO and Cu2O nanocrystals is presented. A bilayer CuO / PCBM solar cell demonstrated an efficiency of 0.04 %, indicating the potential of these materials for light harvesting applications.","abstract_html":"The high cost of production of solar panels has prevented the widespread adoption of solar energy. A possible solution is to pursue solution-based solar cell technologies, since they can enable a low-cost and high-throughput manufacturing process. Both organic semiconductors and inorganic nanocrystals have emerged as promising solution-processable materials for solar cells. In this dissertation, I present my work on the investigation of both classes of materials for solar cell applications. Organic photovoltaics consist of donor and acceptor organic semiconductors. The mechanism of charge transfer between the donor poly(3-hexylthiophene) (P3HT) and acceptor C60 was studied by incorporating an inter-layer into the bilayer solar cell. Charge transfer was shown to take place in a two-step process whereby energy transfer of the photo-generated excitons in P3HT to C60 is followed by a backward charge transfer step to P3HT. Novel ways to process these materials are also investigated. Solar cells from P3HT and a fullerene derivative, phenyl C61-butyric acid methyl ester (PCBM) were fabricated by spray-deposition. Good power conversion efficiencies above 2 % were demonstrated, indicating the viability of spray deposition as a fabrication method. In a separate effort, a novel fluorinated resorcinarene photoresist was used to photolithographically pattern solar cells based on a blend of P3HT and PCBM for highvoltage applications. A 15 mm array of 300 solar cells connected in series achieved an open circuit voltage (VOC) of 90 volts. Three new classes of materials for organic solar cell acceptors are presented, namely pentacenes, hexacenes, and anthradithiophenes. Solar cells based on P3HT and pentacenes gave efficiencies as high as 1.2 %. The hexacenes have the lowest bandgap, enabling hexacene-based solar cells to have photocurrent response up to 800 nm. The anthradithiophene-based solar cells achieved the highest VOC approaching 1.1 Volts, and decent efficiencies of around 0.8 %. Finally, a facile alcothermal method for the synthesis of dispersible CuO and Cu2O nanocrystals is presented. A bilayer CuO / PCBM solar cell demonstrated an efficiency of 0.04 %, indicating the potential of these materials for light harvesting applications.","abstract_has_math":false,"creators":["Lim, Yeefun"],"institution":"Cornell University","degree_name":"Ph. D., Applied Physics","degree_level":"Doctor of Philosophy","degree_discipline":"Applied Physics","degree_department":null,"school":null,"contributors":[],"advisors":[],"committee_chairs":["Malliaras, George G"],"committee_members":["Wise, Frank William","Blakely, John M","Hanrath, Tobias"],"year":2011,"date_issued":"2011-05-29","date_published":"2011-05-29","updated_at":"2026-11-19T03:16:49Z","subjects":["Photovoltaic","Organic electronics","Solution-processing"],"languages":["en_US"],"rights":[],"rights_urls":[],"identifier_entries":[{"key":"dc:identifier.bibid","label":"Dc Identifier Bibid","values":["8213963"],"render_values":[{"text":"8213963","href":null,"code":true}]}],"person_identifier_entries":[]},"links":{"outbound_url":"https://hdl.handle.net/1813/33652","outbound_label":"Handle","outbound_source":"dc:identifier.uri","record_url":"https://hdl.handle.net/1813/33652","record_label":"Repository record","record_kind":"handle","record_source":"dc:identifier.uri","download_url":null,"download_label":null,"download_source":null,"access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://ecommons.cornell.edu/server/oai/request?verb=GetRecord&metadataPrefix=dim&identifier=oai%3Aecommons.cornell.edu%3A1813%2F33652","prefix":"dim"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.chair","label":"Chair","values":["Malliaras, George G"]},{"key":"dc:contributor.committeemember","label":"Committee Member","values":["Wise, Frank William","Blakely, John M","Hanrath, Tobias"]},{"key":"dc:creator","label":"Author","values":["Lim, Yeefun"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.accessioned","label":"Dc Date Accessioned","values":["2013-07-23T18:24:12Z"]},{"key":"dc:date.available","label":"Dc Date Available","values":["2016-09-27T05:39:54Z"]},{"key":"dc:date.issued","label":"Date","values":["2011-05-29"]},{"key":"dc:type","label":"Dc Type","values":["dissertation or thesis"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Applied Physics"]},{"key":"thesis:degree_level","label":"Degree Level","values":["Doctor of Philosophy"]},{"key":"thesis:degree_name","label":"Degree Name","values":["Ph. D., Applied Physics"]},{"key":"thesis:institution_name","label":"Thesis Institution Name","values":["Cornell University"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["Photovoltaic","Organic electronics","Solution-processing"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.iso","label":"Language (ISO)","values":["en_US"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.bibid","label":"Dc Identifier Bibid","values":["8213963"]},{"key":"dc:identifier.uri","label":"Identifier URI","values":["https://hdl.handle.net/1813/33652"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"cerif:openaire","label":"Cerif Openaire","values":["<Publication xmlns=\"https://www.openaire.eu/cerif-profile/1.1/\" id=\"44e6d7d0-2e98-46a5-8e53-8ef3beafbe1e\"> <Type xmlns=\"https://www.openaire.eu/cerif-profile/vocab/COAR_Publication_Types\">http://purl.org/coar/resource_type/c_1843</Type> <Language>en_US</Language> <Title>Solution-Processable Solar Cell Technologies</Title> <PublishedIn> <Publication> </Publication> </PublishedIn> <PublicationDate>2011-05-29</PublicationDate> <Authors> <Author> <DisplayName>Lim, Yeefun</DisplayName> <Affiliation> <OrgUnit> </OrgUnit> </Affiliation> </Author> </Authors> <Editors> </Editors> <Publishers> <Publisher> <OrgUnit /> </Publisher> </Publishers> <Keyword>Photovoltaic</Keyword> <Keyword>Organic electronics</Keyword> <Keyword>Solution-processing</Keyword> <Abstract>The high cost of production of solar panels has prevented the widespread adoption of solar energy. A possible solution is to pursue solution-based solar cell technologies, since they can enable a low-cost and high-throughput manufacturing process. Both organic semiconductors and inorganic nanocrystals have emerged as promising solution-processable materials for solar cells. In this dissertation, I present my work on the investigation of both classes of materials for solar cell applications. Organic photovoltaics consist of donor and acceptor organic semiconductors. The mechanism of charge transfer between the donor poly(3-hexylthiophene) (P3HT) and acceptor C60 was studied by incorporating an inter-layer into the bilayer solar cell. Charge transfer was shown to take place in a two-step process whereby energy transfer of the photo-generated excitons in P3HT to C60 is followed by a backward charge transfer step to P3HT. Novel ways to process these materials are also investigated. Solar cells from P3HT and a fullerene derivative, phenyl C61-butyric acid methyl ester (PCBM) were fabricated by spray-deposition. Good power conversion efficiencies above 2 % were demonstrated, indicating the viability of spray deposition as a fabrication method. In a separate effort, a novel fluorinated resorcinarene photoresist was used to photolithographically pattern solar cells based on a blend of P3HT and PCBM for highvoltage applications. A 15 mm array of 300 solar cells connected in series achieved an open circuit voltage (VOC) of 90 volts. Three new classes of materials for organic solar cell acceptors are presented, namely pentacenes, hexacenes, and anthradithiophenes. Solar cells based on P3HT and pentacenes gave efficiencies as high as 1.2 %. The hexacenes have the lowest bandgap, enabling hexacene-based solar cells to have photocurrent response up to 800 nm. The anthradithiophene-based solar cells achieved the highest VOC approaching 1.1 Volts, and decent efficiencies of around 0.8 %. Finally, a facile alcothermal method for the synthesis of dispersible CuO and Cu2O nanocrystals is presented. A bilayer CuO / PCBM solar cell demonstrated an efficiency of 0.04 %, indicating the potential of these materials for light harvesting applications.</Abstract> <Access xmlns=\"http://purl.org/coar/access_right\" > </Access> </Publication>"]},{"key":"cris:virtual.author","label":"Cris Virtual Author","values":["Lim, Yeefun"]},{"key":"cris:virtualsource.collection","label":"Cris Virtualsource Collection","values":["5893a6ea-7af3-41d7-abc6-04bcd26ab5df"]},{"key":"dc:description.abstract","label":"Abstract","values":["The high cost of production of solar panels has prevented the widespread adoption of solar energy. A possible solution is to pursue solution-based solar cell technologies, since they can enable a low-cost and high-throughput manufacturing process. Both organic semiconductors and inorganic nanocrystals have emerged as promising solution-processable materials for solar cells. In this dissertation, I present my work on the investigation of both classes of materials for solar cell applications. Organic photovoltaics consist of donor and acceptor organic semiconductors. The mechanism of charge transfer between the donor poly(3-hexylthiophene) (P3HT) and acceptor C60 was studied by incorporating an inter-layer into the bilayer solar cell. Charge transfer was shown to take place in a two-step process whereby energy transfer of the photo-generated excitons in P3HT to C60 is followed by a backward charge transfer step to P3HT. Novel ways to process these materials are also investigated. Solar cells from P3HT and a fullerene derivative, phenyl C61-butyric acid methyl ester (PCBM) were fabricated by spray-deposition. Good power conversion efficiencies above 2 % were demonstrated, indicating the viability of spray deposition as a fabrication method. In a separate effort, a novel fluorinated resorcinarene photoresist was used to photolithographically pattern solar cells based on a blend of P3HT and PCBM for highvoltage applications. A 15 mm array of 300 solar cells connected in series achieved an open circuit voltage (VOC) of 90 volts. Three new classes of materials for organic solar cell acceptors are presented, namely pentacenes, hexacenes, and anthradithiophenes. Solar cells based on P3HT and pentacenes gave efficiencies as high as 1.2 %. The hexacenes have the lowest bandgap, enabling hexacene-based solar cells to have photocurrent response up to 800 nm. The anthradithiophene-based solar cells achieved the highest VOC approaching 1.1 Volts, and decent efficiencies of around 0.8 %. Finally, a facile alcothermal method for the synthesis of dispersible CuO and Cu2O nanocrystals is presented. A bilayer CuO / PCBM solar cell demonstrated an efficiency of 0.04 %, indicating the potential of these materials for light harvesting applications."]},{"key":"dc:description.collection","label":"Dc Description Collection","values":["Cornell Theses and Dissertations"]},{"key":"dc:format.mimetype","label":"Dc Format Mimetype","values":["application/pdf"]},{"key":"dc:title","label":"Title","values":["Solution-Processable Solar Cell Technologies"]},{"key":"dspace:entity.type","label":"Dspace Entity Type","values":["Publication"]},{"key":"others:access_status","label":"Others Access Status","values":["open.access"]}]}],"canonical_facts":{"cerif:openaire":["<Publication xmlns=\"https://www.openaire.eu/cerif-profile/1.1/\" id=\"44e6d7d0-2e98-46a5-8e53-8ef3beafbe1e\"> <Type xmlns=\"https://www.openaire.eu/cerif-profile/vocab/COAR_Publication_Types\">http://purl.org/coar/resource_type/c_1843</Type> <Language>en_US</Language> <Title>Solution-Processable Solar Cell Technologies</Title> <PublishedIn> <Publication> </Publication> </PublishedIn> <PublicationDate>2011-05-29</PublicationDate> <Authors> <Author> <DisplayName>Lim, Yeefun</DisplayName> <Affiliation> <OrgUnit> </OrgUnit> </Affiliation> </Author> </Authors> <Editors> </Editors> <Publishers> <Publisher> <OrgUnit /> </Publisher> </Publishers> <Keyword>Photovoltaic</Keyword> <Keyword>Organic electronics</Keyword> <Keyword>Solution-processing</Keyword> <Abstract>The high cost of production of solar panels has prevented the widespread adoption of solar energy. A possible solution is to pursue solution-based solar cell technologies, since they can enable a low-cost and high-throughput manufacturing process. Both organic semiconductors and inorganic nanocrystals have emerged as promising solution-processable materials for solar cells. In this dissertation, I present my work on the investigation of both classes of materials for solar cell applications. Organic photovoltaics consist of donor and acceptor organic semiconductors. The mechanism of charge transfer between the donor poly(3-hexylthiophene) (P3HT) and acceptor C60 was studied by incorporating an inter-layer into the bilayer solar cell. Charge transfer was shown to take place in a two-step process whereby energy transfer of the photo-generated excitons in P3HT to C60 is followed by a backward charge transfer step to P3HT. Novel ways to process these materials are also investigated. Solar cells from P3HT and a fullerene derivative, phenyl C61-butyric acid methyl ester (PCBM) were fabricated by spray-deposition. Good power conversion efficiencies above 2 % were demonstrated, indicating the viability of spray deposition as a fabrication method. In a separate effort, a novel fluorinated resorcinarene photoresist was used to photolithographically pattern solar cells based on a blend of P3HT and PCBM for highvoltage applications. A 15 mm array of 300 solar cells connected in series achieved an open circuit voltage (VOC) of 90 volts. Three new classes of materials for organic solar cell acceptors are presented, namely pentacenes, hexacenes, and anthradithiophenes. Solar cells based on P3HT and pentacenes gave efficiencies as high as 1.2 %. The hexacenes have the lowest bandgap, enabling hexacene-based solar cells to have photocurrent response up to 800 nm. The anthradithiophene-based solar cells achieved the highest VOC approaching 1.1 Volts, and decent efficiencies of around 0.8 %. Finally, a facile alcothermal method for the synthesis of dispersible CuO and Cu2O nanocrystals is presented. A bilayer CuO / PCBM solar cell demonstrated an efficiency of 0.04 %, indicating the potential of these materials for light harvesting applications.</Abstract> <Access xmlns=\"http://purl.org/coar/access_right\" > </Access> </Publication>"],"cris:virtual.author":["Lim, Yeefun"],"cris:virtualsource.collection":["5893a6ea-7af3-41d7-abc6-04bcd26ab5df"],"dc:contributor.chair":["Malliaras, George G"],"dc:contributor.committeemember":["Wise, Frank William","Blakely, John M","Hanrath, Tobias"],"dc:creator":["Lim, Yeefun"],"dc:date.accessioned":["2013-07-23T18:24:12Z"],"dc:date.available":["2016-09-27T05:39:54Z"],"dc:date.issued":["2011-05-29"],"dc:description.abstract":["The high cost of production of solar panels has prevented the widespread adoption of solar energy. A possible solution is to pursue solution-based solar cell technologies, since they can enable a low-cost and high-throughput manufacturing process. Both organic semiconductors and inorganic nanocrystals have emerged as promising solution-processable materials for solar cells. In this dissertation, I present my work on the investigation of both classes of materials for solar cell applications. Organic photovoltaics consist of donor and acceptor organic semiconductors. The mechanism of charge transfer between the donor poly(3-hexylthiophene) (P3HT) and acceptor C60 was studied by incorporating an inter-layer into the bilayer solar cell. Charge transfer was shown to take place in a two-step process whereby energy transfer of the photo-generated excitons in P3HT to C60 is followed by a backward charge transfer step to P3HT. Novel ways to process these materials are also investigated. Solar cells from P3HT and a fullerene derivative, phenyl C61-butyric acid methyl ester (PCBM) were fabricated by spray-deposition. Good power conversion efficiencies above 2 % were demonstrated, indicating the viability of spray deposition as a fabrication method. In a separate effort, a novel fluorinated resorcinarene photoresist was used to photolithographically pattern solar cells based on a blend of P3HT and PCBM for highvoltage applications. A 15 mm array of 300 solar cells connected in series achieved an open circuit voltage (VOC) of 90 volts. Three new classes of materials for organic solar cell acceptors are presented, namely pentacenes, hexacenes, and anthradithiophenes. Solar cells based on P3HT and pentacenes gave efficiencies as high as 1.2 %. The hexacenes have the lowest bandgap, enabling hexacene-based solar cells to have photocurrent response up to 800 nm. The anthradithiophene-based solar cells achieved the highest VOC approaching 1.1 Volts, and decent efficiencies of around 0.8 %. Finally, a facile alcothermal method for the synthesis of dispersible CuO and Cu2O nanocrystals is presented. A bilayer CuO / PCBM solar cell demonstrated an efficiency of 0.04 %, indicating the potential of these materials for light harvesting applications."],"dc:description.collection":["Cornell Theses and Dissertations"],"dc:format.mimetype":["application/pdf"],"dc:identifier.bibid":["8213963"],"dc:identifier.uri":["https://hdl.handle.net/1813/33652"],"dc:language.iso":["en_US"],"dc:subject":["Photovoltaic","Organic electronics","Solution-processing"],"dc:title":["Solution-Processable Solar Cell Technologies"],"dc:type":["dissertation or thesis"],"dspace:entity.type":["Publication"],"others:access_status":["open.access"],"thesis:degree_discipline":["Applied Physics"],"thesis:degree_level":["Doctor of Philosophy"],"thesis:degree_name":["Ph. D., Applied Physics"],"thesis:institution_name":["Cornell University"]},"updated_at":"2026-11-19T03:16:49Z"}