{"id":{"repo_id":"cornell","oai_identifier":"oai:ecommons.cornell.edu:1813/38982"},"canonical_url":"https://search.ndltd.org/etd/cornell/oai:ecommons.cornell.edu:1813/38982","repository":{"repo_id":"cornell","name":"Cornell University","base_url":"https://ecommons.cornell.edu/server/oai/request"},"display":{"title":"Geothermal Resource Assessment: A Case Study Of Spatial Variability And Uncertainty Analysis For The States Of New York And Pennsylvania","abstract":"Historically, the Northeastern United States has not been carefully explored for geothermal resources mainly because of its low-grade category, which does not make it feasible for electricity generation in today's energy markets. Advanced technologies, such as Enhanced Geothermal Systems (EGS), have shown potential for using low-grade resources for both direct thermal use for heating and cooling and combined heat and power applications (CHP) (Tester et al., 2006; Tester et al., 2010). Interest in geothermal has fluctuated over the last 40 years, since uncertainties in resource maps, coupled with expected high drilling costs often minimize the viability of low-grade geothermal resources relative to the cost of current alternatives, such as natural gas. Research in this area continues to be done with the hope of exploiting the many economic, social, and political benefits this renewable energy has to offer. This thesis develops and compares methods for the assessment of geothermal characteristics of a region and their estimates of the uncertainty in the assessments. In addition, this thesis uses such methods to provide an assessment of the geothermal characteristics of the New York - Pennsylvania region for which drill-log information is available. This thesis has 5 major sections corresponding to 9 chapters. Chapters 1 and 2 provide an introduction to the thesis and the analysis. Chapter 3 discusses methods for developing thermal resource characteristics. Specifically, bottom-hole temperature (BHT) corrections and equations used to describe geothermal gradient, average thermal conductivity, surface heat flow, and temperature-at-depth are discussed. Chapters 4 and 5 provide an analysis of the geology and available well data for the Appalachian Basin of New York and Pennsylvania. Chapter 5 recommends methods for the detection of anomalies or outlying values within large datasets. Chapters 6 and 7 recommend methods for the assessment of geothermal characteristics for the Appalachian Basin of New York and Pennsylvania, as well as estimates of the uncertainty in the assessment. Chapter 8 provides a comparison of the estimates reported in Chapter 6 and 7 and reports the performance of each method. Chapter 9 provides the conclusions of the thesis and the analysis.","abstract_html":"Historically, the Northeastern United States has not been carefully explored for geothermal resources mainly because of its low-grade category, which does not make it feasible for electricity generation in today&#x27;s energy markets. Advanced technologies, such as Enhanced Geothermal Systems (EGS), have shown potential for using low-grade resources for both direct thermal use for heating and cooling and combined heat and power applications (CHP) (Tester et al., 2006; Tester et al., 2010). Interest in geothermal has fluctuated over the last 40 years, since uncertainties in resource maps, coupled with expected high drilling costs often minimize the viability of low-grade geothermal resources relative to the cost of current alternatives, such as natural gas. Research in this area continues to be done with the hope of exploiting the many economic, social, and political benefits this renewable energy has to offer. This thesis develops and compares methods for the assessment of geothermal characteristics of a region and their estimates of the uncertainty in the assessments. In addition, this thesis uses such methods to provide an assessment of the geothermal characteristics of the New York - Pennsylvania region for which drill-log information is available. This thesis has 5 major sections corresponding to 9 chapters. Chapters 1 and 2 provide an introduction to the thesis and the analysis. Chapter 3 discusses methods for developing thermal resource characteristics. Specifically, bottom-hole temperature (BHT) corrections and equations used to describe geothermal gradient, average thermal conductivity, surface heat flow, and temperature-at-depth are discussed. Chapters 4 and 5 provide an analysis of the geology and available well data for the Appalachian Basin of New York and Pennsylvania. Chapter 5 recommends methods for the detection of anomalies or outlying values within large datasets. Chapters 6 and 7 recommend methods for the assessment of geothermal characteristics for the Appalachian Basin of New York and Pennsylvania, as well as estimates of the uncertainty in the assessment. Chapter 8 provides a comparison of the estimates reported in Chapter 6 and 7 and reports the performance of each method. Chapter 9 provides the conclusions of the thesis and the analysis.","abstract_has_math":false,"creators":["Aguirre, Gloria"],"institution":"Cornell University","degree_name":"M.S., Civil and Environmental Engineering","degree_level":"Master of Science","degree_discipline":"Civil and Environmental Engineering","degree_department":null,"school":null,"contributors":[],"advisors":[],"committee_chairs":["Stedinger, Jery Russell"],"committee_members":["Tester, Jefferson William"],"year":2014,"date_issued":"2014-08-18","date_published":"2014-08-18","updated_at":"2026-11-19T03:18:04Z","subjects":["Geothermal Resource Assessment","New York State and Pennsylvania","Uncertainty Analysis"],"languages":["en_US"],"rights":[],"rights_urls":[],"identifier_entries":[{"key":"dc:identifier.bibid","label":"Dc Identifier Bibid","values":["8793313"],"render_values":[{"text":"8793313","href":null,"code":true}]}],"person_identifier_entries":[]},"links":{"outbound_url":"https://hdl.handle.net/1813/38982","outbound_label":"Handle","outbound_source":"dc:identifier.uri","record_url":"https://hdl.handle.net/1813/38982","record_label":"Repository record","record_kind":"handle","record_source":"dc:identifier.uri","download_url":null,"download_label":null,"download_source":null,"access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://ecommons.cornell.edu/server/oai/request?verb=GetRecord&metadataPrefix=dim&identifier=oai%3Aecommons.cornell.edu%3A1813%2F38982","prefix":"dim"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.chair","label":"Chair","values":["Stedinger, Jery Russell"]},{"key":"dc:contributor.committeemember","label":"Committee Member","values":["Tester, Jefferson William"]},{"key":"dc:creator","label":"Author","values":["Aguirre, Gloria"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.accessioned","label":"Dc Date Accessioned","values":["2015-01-07T20:58:50Z"]},{"key":"dc:date.available","label":"Dc Date Available","values":["2015-01-07T20:58:50Z"]},{"key":"dc:date.issued","label":"Date","values":["2014-08-18"]},{"key":"dc:type","label":"Dc Type","values":["dissertation or thesis"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Civil and Environmental Engineering"]},{"key":"thesis:degree_level","label":"Degree Level","values":["Master of Science"]},{"key":"thesis:degree_name","label":"Degree Name","values":["M.S., Civil and Environmental Engineering"]},{"key":"thesis:institution_name","label":"Thesis Institution Name","values":["Cornell University"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["Geothermal Resource Assessment","New York State and Pennsylvania","Uncertainty Analysis"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.iso","label":"Language (ISO)","values":["en_US"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.bibid","label":"Dc Identifier Bibid","values":["8793313"]},{"key":"dc:identifier.uri","label":"Identifier URI","values":["https://hdl.handle.net/1813/38982"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"cerif:openaire","label":"Cerif Openaire","values":["<Publication xmlns=\"https://www.openaire.eu/cerif-profile/1.1/\" id=\"401980c6-9a2e-49ae-8335-f1842b8ff5d0\"> <Type xmlns=\"https://www.openaire.eu/cerif-profile/vocab/COAR_Publication_Types\">http://purl.org/coar/resource_type/c_1843</Type> <Language>en_US</Language> <Title>Geothermal Resource Assessment: A Case Study Of Spatial Variability And Uncertainty Analysis For The States Of New York And Pennsylvania</Title> <PublishedIn> <Publication> </Publication> </PublishedIn> <PublicationDate>2014-08-18</PublicationDate> <Authors> <Author> <DisplayName>Aguirre, Gloria</DisplayName> <Affiliation> <OrgUnit> </OrgUnit> </Affiliation> </Author> </Authors> <Editors> </Editors> <Publishers> <Publisher> <OrgUnit /> </Publisher> </Publishers> <Keyword>Geothermal Resource Assessment</Keyword> <Keyword>New York State and Pennsylvania</Keyword> <Keyword>Uncertainty Analysis</Keyword> <Abstract>Historically, the Northeastern United States has not been carefully explored for geothermal resources mainly because of its low-grade category, which does not make it feasible for electricity generation in today's energy markets. Advanced technologies, such as Enhanced Geothermal Systems (EGS), have shown potential for using low-grade resources for both direct thermal use for heating and cooling and combined heat and power applications (CHP) (Tester et al., 2006; Tester et al., 2010). Interest in geothermal has fluctuated over the last 40 years, since uncertainties in resource maps, coupled with expected high drilling costs often minimize the viability of low-grade geothermal resources relative to the cost of current alternatives, such as natural gas. Research in this area continues to be done with the hope of exploiting the many economic, social, and political benefits this renewable energy has to offer. This thesis develops and compares methods for the assessment of geothermal characteristics of a region and their estimates of the uncertainty in the assessments. In addition, this thesis uses such methods to provide an assessment of the geothermal characteristics of the New York - Pennsylvania region for which drill-log information is available. This thesis has 5 major sections corresponding to 9 chapters. Chapters 1 and 2 provide an introduction to the thesis and the analysis. Chapter 3 discusses methods for developing thermal resource characteristics. Specifically, bottom-hole temperature (BHT) corrections and equations used to describe geothermal gradient, average thermal conductivity, surface heat flow, and temperature-at-depth are discussed. Chapters 4 and 5 provide an analysis of the geology and available well data for the Appalachian Basin of New York and Pennsylvania. Chapter 5 recommends methods for the detection of anomalies or outlying values within large datasets. Chapters 6 and 7 recommend methods for the assessment of geothermal characteristics for the Appalachian Basin of New York and Pennsylvania, as well as estimates of the uncertainty in the assessment. Chapter 8 provides a comparison of the estimates reported in Chapter 6 and 7 and reports the performance of each method. Chapter 9 provides the conclusions of the thesis and the analysis.</Abstract> <Access xmlns=\"http://purl.org/coar/access_right\" > </Access> </Publication>"]},{"key":"cris:virtual.author","label":"Cris Virtual Author","values":["Aguirre, Gloria"]},{"key":"cris:virtualsource.collection","label":"Cris Virtualsource Collection","values":["5893a6ea-7af3-41d7-abc6-04bcd26ab5df"]},{"key":"dc:description.abstract","label":"Abstract","values":["Historically, the Northeastern United States has not been carefully explored for geothermal resources mainly because of its low-grade category, which does not make it feasible for electricity generation in today's energy markets. Advanced technologies, such as Enhanced Geothermal Systems (EGS), have shown potential for using low-grade resources for both direct thermal use for heating and cooling and combined heat and power applications (CHP) (Tester et al., 2006; Tester et al., 2010). Interest in geothermal has fluctuated over the last 40 years, since uncertainties in resource maps, coupled with expected high drilling costs often minimize the viability of low-grade geothermal resources relative to the cost of current alternatives, such as natural gas. Research in this area continues to be done with the hope of exploiting the many economic, social, and political benefits this renewable energy has to offer. This thesis develops and compares methods for the assessment of geothermal characteristics of a region and their estimates of the uncertainty in the assessments. In addition, this thesis uses such methods to provide an assessment of the geothermal characteristics of the New York - Pennsylvania region for which drill-log information is available. This thesis has 5 major sections corresponding to 9 chapters. Chapters 1 and 2 provide an introduction to the thesis and the analysis. Chapter 3 discusses methods for developing thermal resource characteristics. Specifically, bottom-hole temperature (BHT) corrections and equations used to describe geothermal gradient, average thermal conductivity, surface heat flow, and temperature-at-depth are discussed. Chapters 4 and 5 provide an analysis of the geology and available well data for the Appalachian Basin of New York and Pennsylvania. Chapter 5 recommends methods for the detection of anomalies or outlying values within large datasets. Chapters 6 and 7 recommend methods for the assessment of geothermal characteristics for the Appalachian Basin of New York and Pennsylvania, as well as estimates of the uncertainty in the assessment. Chapter 8 provides a comparison of the estimates reported in Chapter 6 and 7 and reports the performance of each method. Chapter 9 provides the conclusions of the thesis and the analysis."]},{"key":"dc:description.collection","label":"Dc Description Collection","values":["Cornell Theses and Dissertations"]},{"key":"dc:format.mimetype","label":"Dc Format Mimetype","values":["application/pdf"]},{"key":"dc:title","label":"Title","values":["Geothermal Resource Assessment: A Case Study Of Spatial Variability And Uncertainty Analysis For The States Of New York And Pennsylvania"]},{"key":"dspace:entity.type","label":"Dspace Entity Type","values":["Publication"]},{"key":"others:access_status","label":"Others Access Status","values":["open.access"]}]}],"canonical_facts":{"cerif:openaire":["<Publication xmlns=\"https://www.openaire.eu/cerif-profile/1.1/\" id=\"401980c6-9a2e-49ae-8335-f1842b8ff5d0\"> <Type xmlns=\"https://www.openaire.eu/cerif-profile/vocab/COAR_Publication_Types\">http://purl.org/coar/resource_type/c_1843</Type> <Language>en_US</Language> <Title>Geothermal Resource Assessment: A Case Study Of Spatial Variability And Uncertainty Analysis For The States Of New York And Pennsylvania</Title> <PublishedIn> <Publication> </Publication> </PublishedIn> <PublicationDate>2014-08-18</PublicationDate> <Authors> <Author> <DisplayName>Aguirre, Gloria</DisplayName> <Affiliation> <OrgUnit> </OrgUnit> </Affiliation> </Author> </Authors> <Editors> </Editors> <Publishers> <Publisher> <OrgUnit /> </Publisher> </Publishers> <Keyword>Geothermal Resource Assessment</Keyword> <Keyword>New York State and Pennsylvania</Keyword> <Keyword>Uncertainty Analysis</Keyword> <Abstract>Historically, the Northeastern United States has not been carefully explored for geothermal resources mainly because of its low-grade category, which does not make it feasible for electricity generation in today's energy markets. Advanced technologies, such as Enhanced Geothermal Systems (EGS), have shown potential for using low-grade resources for both direct thermal use for heating and cooling and combined heat and power applications (CHP) (Tester et al., 2006; Tester et al., 2010). Interest in geothermal has fluctuated over the last 40 years, since uncertainties in resource maps, coupled with expected high drilling costs often minimize the viability of low-grade geothermal resources relative to the cost of current alternatives, such as natural gas. Research in this area continues to be done with the hope of exploiting the many economic, social, and political benefits this renewable energy has to offer. This thesis develops and compares methods for the assessment of geothermal characteristics of a region and their estimates of the uncertainty in the assessments. In addition, this thesis uses such methods to provide an assessment of the geothermal characteristics of the New York - Pennsylvania region for which drill-log information is available. This thesis has 5 major sections corresponding to 9 chapters. Chapters 1 and 2 provide an introduction to the thesis and the analysis. Chapter 3 discusses methods for developing thermal resource characteristics. Specifically, bottom-hole temperature (BHT) corrections and equations used to describe geothermal gradient, average thermal conductivity, surface heat flow, and temperature-at-depth are discussed. Chapters 4 and 5 provide an analysis of the geology and available well data for the Appalachian Basin of New York and Pennsylvania. Chapter 5 recommends methods for the detection of anomalies or outlying values within large datasets. Chapters 6 and 7 recommend methods for the assessment of geothermal characteristics for the Appalachian Basin of New York and Pennsylvania, as well as estimates of the uncertainty in the assessment. Chapter 8 provides a comparison of the estimates reported in Chapter 6 and 7 and reports the performance of each method. Chapter 9 provides the conclusions of the thesis and the analysis.</Abstract> <Access xmlns=\"http://purl.org/coar/access_right\" > </Access> </Publication>"],"cris:virtual.author":["Aguirre, Gloria"],"cris:virtualsource.collection":["5893a6ea-7af3-41d7-abc6-04bcd26ab5df"],"dc:contributor.chair":["Stedinger, Jery Russell"],"dc:contributor.committeemember":["Tester, Jefferson William"],"dc:creator":["Aguirre, Gloria"],"dc:date.accessioned":["2015-01-07T20:58:50Z"],"dc:date.available":["2015-01-07T20:58:50Z"],"dc:date.issued":["2014-08-18"],"dc:description.abstract":["Historically, the Northeastern United States has not been carefully explored for geothermal resources mainly because of its low-grade category, which does not make it feasible for electricity generation in today's energy markets. Advanced technologies, such as Enhanced Geothermal Systems (EGS), have shown potential for using low-grade resources for both direct thermal use for heating and cooling and combined heat and power applications (CHP) (Tester et al., 2006; Tester et al., 2010). Interest in geothermal has fluctuated over the last 40 years, since uncertainties in resource maps, coupled with expected high drilling costs often minimize the viability of low-grade geothermal resources relative to the cost of current alternatives, such as natural gas. Research in this area continues to be done with the hope of exploiting the many economic, social, and political benefits this renewable energy has to offer. This thesis develops and compares methods for the assessment of geothermal characteristics of a region and their estimates of the uncertainty in the assessments. In addition, this thesis uses such methods to provide an assessment of the geothermal characteristics of the New York - Pennsylvania region for which drill-log information is available. This thesis has 5 major sections corresponding to 9 chapters. Chapters 1 and 2 provide an introduction to the thesis and the analysis. Chapter 3 discusses methods for developing thermal resource characteristics. Specifically, bottom-hole temperature (BHT) corrections and equations used to describe geothermal gradient, average thermal conductivity, surface heat flow, and temperature-at-depth are discussed. Chapters 4 and 5 provide an analysis of the geology and available well data for the Appalachian Basin of New York and Pennsylvania. Chapter 5 recommends methods for the detection of anomalies or outlying values within large datasets. Chapters 6 and 7 recommend methods for the assessment of geothermal characteristics for the Appalachian Basin of New York and Pennsylvania, as well as estimates of the uncertainty in the assessment. Chapter 8 provides a comparison of the estimates reported in Chapter 6 and 7 and reports the performance of each method. Chapter 9 provides the conclusions of the thesis and the analysis."],"dc:description.collection":["Cornell Theses and Dissertations"],"dc:format.mimetype":["application/pdf"],"dc:identifier.bibid":["8793313"],"dc:identifier.uri":["https://hdl.handle.net/1813/38982"],"dc:language.iso":["en_US"],"dc:subject":["Geothermal Resource Assessment","New York State and Pennsylvania","Uncertainty Analysis"],"dc:title":["Geothermal Resource Assessment: A Case Study Of Spatial Variability And Uncertainty Analysis For The States Of New York And Pennsylvania"],"dc:type":["dissertation or thesis"],"dspace:entity.type":["Publication"],"others:access_status":["open.access"],"thesis:degree_discipline":["Civil and Environmental Engineering"],"thesis:degree_level":["Master of Science"],"thesis:degree_name":["M.S., Civil and Environmental Engineering"],"thesis:institution_name":["Cornell University"]},"updated_at":"2026-11-19T03:18:04Z"}