{"id":{"repo_id":"cornell","oai_identifier":"oai:ecommons.cornell.edu:1813/59313"},"canonical_url":"https://search.ndltd.org/etd/cornell/oai:ecommons.cornell.edu:1813/59313","repository":{"repo_id":"cornell","name":"Cornell University","base_url":"https://ecommons.cornell.edu/server/oai/request"},"display":{"title":"DISSOLUTION AND THERMAL SPALLATION OF BARRE GRANITE USING PURE AND CHEMICALLY ENHANCED HYDROTHERMAL JETS","abstract":"The primary aim of this study was to investigate the use of hydrothermal jets as a means of drilling rock. Specifically, an electrically heated hydrothermal jet was impinged on the surface of cylindrical Barre Granite samples (basement rock) contained in an autoclave reactor to induce thermal spallation. Comminution of the rock surfaces was achieved at supercritical water conditions, temperatures from 535- 580°C and pressures of 22.5-27MPa. These conditions simulate those encountered in drilling deep, water-filled wells. Preferential removal of quartz grains from the rock matrix was observed. However, experimentally determined heat flux and surface temperature measurements indicated that hydrothermal comminution occurred below the empirically determined minimums for the onset of continuous thermal spallation for low-density flame jet drilling. Chemically enhanced hydrothermal spallation drilling experiments introduced sodium hydroxide into the hydrothermal jet, at the same supercritical conditions. The combination of accelerated mineral dissolution due to the presence of hydroxide ions, high temperature kinetics, and thermal stress induced significant rates of rock removal. Comparison with empirical quartz dissolution data indicated this drilling success was primarily due to chemical dissolution, enabling the quantitative modeling of an effective drilling rate.","abstract_html":"The primary aim of this study was to investigate the use of hydrothermal jets as a means of drilling rock. Specifically, an electrically heated hydrothermal jet was impinged on the surface of cylindrical Barre Granite samples (basement rock) contained in an autoclave reactor to induce thermal spallation. Comminution of the rock surfaces was achieved at supercritical water conditions, temperatures from 535- 580°C and pressures of 22.5-27MPa. These conditions simulate those encountered in drilling deep, water-filled wells. Preferential removal of quartz grains from the rock matrix was observed. However, experimentally determined heat flux and surface temperature measurements indicated that hydrothermal comminution occurred below the empirically determined minimums for the onset of continuous thermal spallation for low-density flame jet drilling. Chemically enhanced hydrothermal spallation drilling experiments introduced sodium hydroxide into the hydrothermal jet, at the same supercritical conditions. The combination of accelerated mineral dissolution due to the presence of hydroxide ions, high temperature kinetics, and thermal stress induced significant rates of rock removal. Comparison with empirical quartz dissolution data indicated this drilling success was primarily due to chemical dissolution, enabling the quantitative modeling of an effective drilling rate.","abstract_has_math":false,"creators":["Beentjes, Ivan"],"institution":"Cornell University","degree_name":"M.S., Chemical Engineering","degree_level":"Master of Science","degree_discipline":"Chemical Engineering","degree_department":null,"school":null,"contributors":[],"advisors":[],"committee_chairs":["Tester, Jefferson William"],"committee_members":["Cathles, Lawrence M."],"year":2018,"date_issued":"2018-05-30","date_published":"2018-05-30","updated_at":"2026-11-19T03:20:08Z","subjects":["Chemical engineering","Advanced drilling","Chemical drilling","Chemically enhanced hydrothermal spallation","Geothermal drilling","Supercritical hydrothermal jet","Thermal Spallation","Geological engineering","Mining"],"languages":["en_US"],"rights":[],"rights_urls":[],"identifier_entries":[{"key":"dc:identifier.doi","label":"DOI","values":["https://doi.org/10.7298/X4K072HR"],"render_values":[{"text":"https://doi.org/10.7298/X4K072HR","href":"https://doi.org/10.7298/X4K072HR","code":true}]},{"key":"dc:identifier.bibid","label":"Dc Identifier Bibid","values":["10489397"],"render_values":[{"text":"10489397","href":null,"code":true}]},{"key":"dc:identifier.other","label":"Dc Identifier Other","values":["ProQuest Submission ID: 10286","ProQuest Publication ID: 10815914"],"render_values":[{"text":"ProQuest Submission ID: 10286","href":null,"code":true},{"text":"ProQuest Publication ID: 10815914","href":null,"code":true}]}],"person_identifier_entries":[]},"links":{"outbound_url":"https://hdl.handle.net/1813/59313","outbound_label":"Handle","outbound_source":"dc:identifier.uri","record_url":"https://hdl.handle.net/1813/59313","record_label":"Repository record","record_kind":"handle","record_source":"dc:identifier.uri","download_url":null,"download_label":null,"download_source":null,"access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://ecommons.cornell.edu/server/oai/request?verb=GetRecord&metadataPrefix=dim&identifier=oai%3Aecommons.cornell.edu%3A1813%2F59313","prefix":"dim"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.chair","label":"Chair","values":["Tester, Jefferson William"]},{"key":"dc:contributor.committeemember","label":"Committee Member","values":["Cathles, Lawrence M."]},{"key":"dc:creator","label":"Author","values":["Beentjes, Ivan"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.accessioned","label":"Dc Date Accessioned","values":["2018-10-23T13:21:35Z"]},{"key":"dc:date.available","label":"Dc Date Available","values":["2020-06-08T06:00:48Z"]},{"key":"dc:date.issued","label":"Date","values":["2018-05-30"]},{"key":"dc:type","label":"Dc Type","values":["dissertation or thesis"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Chemical Engineering"]},{"key":"thesis:degree_level","label":"Degree Level","values":["Master of Science"]},{"key":"thesis:degree_name","label":"Degree Name","values":["M.S., Chemical Engineering"]},{"key":"thesis:institution_name","label":"Thesis Institution Name","values":["Cornell University"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["Chemical engineering","Advanced drilling","Chemical drilling","Chemically enhanced hydrothermal spallation","Geothermal drilling","Supercritical hydrothermal jet","Thermal Spallation","Geological engineering","Mining"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.iso","label":"Language (ISO)","values":["en_US"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.bibid","label":"Dc Identifier Bibid","values":["10489397"]},{"key":"dc:identifier.doi","label":"DOI","values":["https://doi.org/10.7298/X4K072HR"]},{"key":"dc:identifier.other","label":"Dc Identifier Other","values":["ProQuest Submission ID: 10286","ProQuest Publication ID: 10815914"]},{"key":"dc:identifier.uri","label":"Identifier URI","values":["https://hdl.handle.net/1813/59313"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"cerif:openaire","label":"Cerif Openaire","values":["<Publication xmlns=\"https://www.openaire.eu/cerif-profile/1.1/\" id=\"70b5db45-ab0a-43ae-aa9e-1998f4165b70\"> <Type xmlns=\"https://www.openaire.eu/cerif-profile/vocab/COAR_Publication_Types\">http://purl.org/coar/resource_type/c_1843</Type> <Language>en_US</Language> <Title>DISSOLUTION AND THERMAL SPALLATION OF BARRE GRANITE USING PURE AND CHEMICALLY ENHANCED HYDROTHERMAL JETS</Title> <PublishedIn> <Publication> </Publication> </PublishedIn> <PublicationDate>2018-05-30</PublicationDate> <DOI>https://doi.org/10.7298/X4K072HR</DOI> <Authors> <Author> <DisplayName>Beentjes, Ivan</DisplayName> <Affiliation> <OrgUnit> </OrgUnit> </Affiliation> </Author> </Authors> <Editors> </Editors> <Publishers> <Publisher> <OrgUnit /> </Publisher> </Publishers> <Keyword>Chemical engineering</Keyword> <Keyword>Advanced drilling</Keyword> <Keyword>Chemical drilling</Keyword> <Keyword>Chemically enhanced hydrothermal spallation</Keyword> <Keyword>Geothermal drilling</Keyword> <Keyword>Supercritical hydrothermal jet</Keyword> <Keyword>Thermal Spallation</Keyword> <Keyword>Geological engineering</Keyword> <Keyword>Mining</Keyword> <Abstract>The primary aim of this study was to investigate the use of hydrothermal jets as a means of drilling rock. Specifically, an electrically heated hydrothermal jet was impinged on the surface of cylindrical Barre Granite samples (basement rock) contained in an autoclave reactor to induce thermal spallation. Comminution of the rock surfaces was achieved at supercritical water conditions, temperatures from 535- 580°C and pressures of 22.5-27MPa. These conditions simulate those encountered in drilling deep, water-filled wells. Preferential removal of quartz grains from the rock matrix was observed. However, experimentally determined heat flux and surface temperature measurements indicated that hydrothermal comminution occurred below the empirically determined minimums for the onset of continuous thermal spallation for low-density flame jet drilling. Chemically enhanced hydrothermal spallation drilling experiments introduced sodium hydroxide into the hydrothermal jet, at the same supercritical conditions. The combination of accelerated mineral dissolution due to the presence of hydroxide ions, high temperature kinetics, and thermal stress induced significant rates of rock removal. Comparison with empirical quartz dissolution data indicated this drilling success was primarily due to chemical dissolution, enabling the quantitative modeling of an effective drilling rate.</Abstract> <Access xmlns=\"http://purl.org/coar/access_right\" > </Access> </Publication>"]},{"key":"cris:virtual.author","label":"Cris Virtual Author","values":["Beentjes, Ivan"]},{"key":"cris:virtualsource.collection","label":"Cris Virtualsource Collection","values":["5893a6ea-7af3-41d7-abc6-04bcd26ab5df"]},{"key":"dc:description.abstract","label":"Abstract","values":["The primary aim of this study was to investigate the use of hydrothermal jets as a means of drilling rock. Specifically, an electrically heated hydrothermal jet was impinged on the surface of cylindrical Barre Granite samples (basement rock) contained in an autoclave reactor to induce thermal spallation. Comminution of the rock surfaces was achieved at supercritical water conditions, temperatures from 535- 580°C and pressures of 22.5-27MPa. These conditions simulate those encountered in drilling deep, water-filled wells. Preferential removal of quartz grains from the rock matrix was observed. However, experimentally determined heat flux and surface temperature measurements indicated that hydrothermal comminution occurred below the empirically determined minimums for the onset of continuous thermal spallation for low-density flame jet drilling. Chemically enhanced hydrothermal spallation drilling experiments introduced sodium hydroxide into the hydrothermal jet, at the same supercritical conditions. The combination of accelerated mineral dissolution due to the presence of hydroxide ions, high temperature kinetics, and thermal stress induced significant rates of rock removal. Comparison with empirical quartz dissolution data indicated this drilling success was primarily due to chemical dissolution, enabling the quantitative modeling of an effective drilling rate."]},{"key":"dc:description.collection","label":"Dc Description Collection","values":["Cornell Theses and Dissertations"]},{"key":"dc:format.mimetype","label":"Dc Format Mimetype","values":["application/pdf"]},{"key":"dcterms:license","label":"Dcterms License","values":["https://hdl.handle.net/1813/59810"]},{"key":"dc:title","label":"Title","values":["DISSOLUTION AND THERMAL SPALLATION OF BARRE GRANITE USING PURE AND CHEMICALLY ENHANCED HYDROTHERMAL JETS"]},{"key":"dspace:entity.type","label":"Dspace Entity Type","values":["Publication"]},{"key":"others:access_status","label":"Others Access Status","values":["open.access"]}]}],"canonical_facts":{"cerif:openaire":["<Publication xmlns=\"https://www.openaire.eu/cerif-profile/1.1/\" id=\"70b5db45-ab0a-43ae-aa9e-1998f4165b70\"> <Type xmlns=\"https://www.openaire.eu/cerif-profile/vocab/COAR_Publication_Types\">http://purl.org/coar/resource_type/c_1843</Type> <Language>en_US</Language> <Title>DISSOLUTION AND THERMAL SPALLATION OF BARRE GRANITE USING PURE AND CHEMICALLY ENHANCED HYDROTHERMAL JETS</Title> <PublishedIn> <Publication> </Publication> </PublishedIn> <PublicationDate>2018-05-30</PublicationDate> <DOI>https://doi.org/10.7298/X4K072HR</DOI> <Authors> <Author> <DisplayName>Beentjes, Ivan</DisplayName> <Affiliation> <OrgUnit> </OrgUnit> </Affiliation> </Author> </Authors> <Editors> </Editors> <Publishers> <Publisher> <OrgUnit /> </Publisher> </Publishers> <Keyword>Chemical engineering</Keyword> <Keyword>Advanced drilling</Keyword> <Keyword>Chemical drilling</Keyword> <Keyword>Chemically enhanced hydrothermal spallation</Keyword> <Keyword>Geothermal drilling</Keyword> <Keyword>Supercritical hydrothermal jet</Keyword> <Keyword>Thermal Spallation</Keyword> <Keyword>Geological engineering</Keyword> <Keyword>Mining</Keyword> <Abstract>The primary aim of this study was to investigate the use of hydrothermal jets as a means of drilling rock. Specifically, an electrically heated hydrothermal jet was impinged on the surface of cylindrical Barre Granite samples (basement rock) contained in an autoclave reactor to induce thermal spallation. Comminution of the rock surfaces was achieved at supercritical water conditions, temperatures from 535- 580°C and pressures of 22.5-27MPa. These conditions simulate those encountered in drilling deep, water-filled wells. Preferential removal of quartz grains from the rock matrix was observed. However, experimentally determined heat flux and surface temperature measurements indicated that hydrothermal comminution occurred below the empirically determined minimums for the onset of continuous thermal spallation for low-density flame jet drilling. Chemically enhanced hydrothermal spallation drilling experiments introduced sodium hydroxide into the hydrothermal jet, at the same supercritical conditions. The combination of accelerated mineral dissolution due to the presence of hydroxide ions, high temperature kinetics, and thermal stress induced significant rates of rock removal. Comparison with empirical quartz dissolution data indicated this drilling success was primarily due to chemical dissolution, enabling the quantitative modeling of an effective drilling rate.</Abstract> <Access xmlns=\"http://purl.org/coar/access_right\" > </Access> </Publication>"],"cris:virtual.author":["Beentjes, Ivan"],"cris:virtualsource.collection":["5893a6ea-7af3-41d7-abc6-04bcd26ab5df"],"dc:contributor.chair":["Tester, Jefferson William"],"dc:contributor.committeemember":["Cathles, Lawrence M."],"dc:creator":["Beentjes, Ivan"],"dc:date.accessioned":["2018-10-23T13:21:35Z"],"dc:date.available":["2020-06-08T06:00:48Z"],"dc:date.issued":["2018-05-30"],"dc:description.abstract":["The primary aim of this study was to investigate the use of hydrothermal jets as a means of drilling rock. Specifically, an electrically heated hydrothermal jet was impinged on the surface of cylindrical Barre Granite samples (basement rock) contained in an autoclave reactor to induce thermal spallation. Comminution of the rock surfaces was achieved at supercritical water conditions, temperatures from 535- 580°C and pressures of 22.5-27MPa. These conditions simulate those encountered in drilling deep, water-filled wells. Preferential removal of quartz grains from the rock matrix was observed. However, experimentally determined heat flux and surface temperature measurements indicated that hydrothermal comminution occurred below the empirically determined minimums for the onset of continuous thermal spallation for low-density flame jet drilling. Chemically enhanced hydrothermal spallation drilling experiments introduced sodium hydroxide into the hydrothermal jet, at the same supercritical conditions. The combination of accelerated mineral dissolution due to the presence of hydroxide ions, high temperature kinetics, and thermal stress induced significant rates of rock removal. Comparison with empirical quartz dissolution data indicated this drilling success was primarily due to chemical dissolution, enabling the quantitative modeling of an effective drilling rate."],"dc:description.collection":["Cornell Theses and Dissertations"],"dc:format.mimetype":["application/pdf"],"dc:identifier.bibid":["10489397"],"dc:identifier.doi":["https://doi.org/10.7298/X4K072HR"],"dc:identifier.other":["ProQuest Submission ID: 10286","ProQuest Publication ID: 10815914"],"dc:identifier.uri":["https://hdl.handle.net/1813/59313"],"dc:language.iso":["en_US"],"dc:subject":["Chemical engineering","Advanced drilling","Chemical drilling","Chemically enhanced hydrothermal spallation","Geothermal drilling","Supercritical hydrothermal jet","Thermal Spallation","Geological engineering","Mining"],"dcterms:license":["https://hdl.handle.net/1813/59810"],"dc:title":["DISSOLUTION AND THERMAL SPALLATION OF BARRE GRANITE USING PURE AND CHEMICALLY ENHANCED HYDROTHERMAL JETS"],"dc:type":["dissertation or thesis"],"dspace:entity.type":["Publication"],"others:access_status":["open.access"],"thesis:degree_discipline":["Chemical Engineering"],"thesis:degree_level":["Master of Science"],"thesis:degree_name":["M.S., Chemical Engineering"],"thesis:institution_name":["Cornell University"]},"updated_at":"2026-11-19T03:20:08Z"}