{"id":{"repo_id":"cornell","oai_identifier":"oai:ecommons.cornell.edu:1813/7618"},"canonical_url":"https://search.ndltd.org/etd/cornell/oai:ecommons.cornell.edu:1813/7618","repository":{"repo_id":"cornell","name":"Cornell University","base_url":"https://ecommons.cornell.edu/server/oai/request"},"display":{"title":"Engineering Surface Morphology at the Atomic Level with Applications in Electronic Materials","abstract":"The silicon (111) and (001) surfaces have wide technological importance. Control of the morphologies of these surfaces at the atomic level is vital for such applications as layer-by-layer growth or assembly of nano-scale devices. We have developed techniques to create large areas with no or widely spaced atomic steps on patterned silicon surfaces by high temperature annealing in ultra-high vacuum (UHV). At annealing temperatures high enough to promote surface premelting, large liquid-like structures form and are preserved during quenching on regions with low step-density since these areas have no efficient sinks to absorb diffusing atoms. Based on the surface morphologies observed by atomic force microscopy, we suggest a sequence of events for the evolution of the silicon surface, from the onset of surface premelting up to the bulk melting temperature. Large dendritic islands observed on the more slowly cooled down Si(111) samples are attributed to the persistence of surface melted structures and to non-equilibrium ?condensation? of the excess adatoms from the (1x1) ? (7x7) phase transition. The effect of UHV high temperature annealing on the Si(111) surface is an initial increase in the measured surface roughness due to Ostwald ripening followed by a surface smoothing to become atomically flat. The boundaries of etched craters or mesas initially develop profiles upon annealing that conform to the predictions of continuum theory of surface transport. As an application, we built MOS capacitors on three types of Si(111) surfaces viz. atomically flat surfaces, normal (stepped) surfaces cleaned in UHV by high-temperature annealing and normal, RCA cleaned wafer surfaces. The leakage current through the oxide was measured for all three cases. Our results show that the smoother the surface before oxidation, the smaller the leakage current. In another application Si(111) substrates with regular arrays of atomic steps were used to induce azimuthal alignment of crystals in thin pentacene films. Pentacene films deposited on heated samples, at a low deposition rate, show significant azimuthal alignment of the pentacene crystals relative to the atomic steps, with the (110) pentacene planes being parallel to the atomic steps.","abstract_html":"The silicon (111) and (001) surfaces have wide technological importance. Control of the morphologies of these surfaces at the atomic level is vital for such applications as layer-by-layer growth or assembly of nano-scale devices. We have developed techniques to create large areas with no or widely spaced atomic steps on patterned silicon surfaces by high temperature annealing in ultra-high vacuum (UHV). At annealing temperatures high enough to promote surface premelting, large liquid-like structures form and are preserved during quenching on regions with low step-density since these areas have no efficient sinks to absorb diffusing atoms. Based on the surface morphologies observed by atomic force microscopy, we suggest a sequence of events for the evolution of the silicon surface, from the onset of surface premelting up to the bulk melting temperature. Large dendritic islands observed on the more slowly cooled down Si(111) samples are attributed to the persistence of surface melted structures and to non-equilibrium ?condensation? of the excess adatoms from the (1x1) ? (7x7) phase transition. The effect of UHV high temperature annealing on the Si(111) surface is an initial increase in the measured surface roughness due to Ostwald ripening followed by a surface smoothing to become atomically flat. The boundaries of etched craters or mesas initially develop profiles upon annealing that conform to the predictions of continuum theory of surface transport. As an application, we built MOS capacitors on three types of Si(111) surfaces viz. atomically flat surfaces, normal (stepped) surfaces cleaned in UHV by high-temperature annealing and normal, RCA cleaned wafer surfaces. The leakage current through the oxide was measured for all three cases. Our results show that the smoother the surface before oxidation, the smaller the leakage current. In another application Si(111) substrates with regular arrays of atomic steps were used to induce azimuthal alignment of crystals in thin pentacene films. Pentacene films deposited on heated samples, at a low deposition rate, show significant azimuthal alignment of the pentacene crystals relative to the atomic steps, with the (110) pentacene planes being parallel to the atomic steps.","abstract_has_math":false,"creators":["Valerian, Ignatescu"],"institution":null,"degree_name":null,"degree_level":null,"degree_discipline":null,"degree_department":null,"school":null,"contributors":[],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2007,"date_issued":"2007-05-24T16:25:13Z","date_published":"2007-05-24T16:25:13Z","updated_at":"2026-11-19T03:21:11Z","subjects":["AFM","atomic steps","surface pre-melting","step-free surfaces","surface morphology","etched craters","UHV annealing","roughness","ridge","trench","Si(111)","dendritic islands","fractal dimension","(1x1) to (7x7) phase transition","MOS capacitor","Fowler-Nordheim tunneling","leakage current","pentacene","stepped substrate","GIXD","azimuthal alignment","thin film"],"languages":[],"rights":[],"rights_urls":[],"identifier_entries":[{"key":"dc:identifier.bibid","label":"Dc Identifier Bibid","values":["6476319"],"render_values":[{"text":"6476319","href":null,"code":true}]}],"person_identifier_entries":[]},"links":{"outbound_url":"https://hdl.handle.net/1813/7618","outbound_label":"Handle","outbound_source":"dc:identifier.uri","record_url":"https://hdl.handle.net/1813/7618","record_label":"Repository record","record_kind":"handle","record_source":"dc:identifier.uri","download_url":null,"download_label":null,"download_source":null,"access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://ecommons.cornell.edu/server/oai/request?verb=GetRecord&metadataPrefix=dim&identifier=oai%3Aecommons.cornell.edu%3A1813%2F7618","prefix":"dim"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:creator","label":"Author","values":["Valerian, Ignatescu"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.accessioned","label":"Dc Date Accessioned","values":["2007-05-24T16:25:13Z"]},{"key":"dc:date.available","label":"Dc Date Available","values":["2012-05-24T06:38:42Z"]},{"key":"dc:date.issued","label":"Date","values":["2007-05-24T16:25:13Z"]},{"key":"dc:type","label":"Dc Type","values":["dissertation or thesis"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["AFM","atomic steps","surface pre-melting","step-free surfaces","surface morphology","etched craters","UHV annealing","roughness","ridge","trench","Si(111)","dendritic islands","fractal dimension","(1x1) to (7x7) phase transition","MOS capacitor","Fowler-Nordheim tunneling","leakage current","pentacene","stepped substrate","GIXD","azimuthal alignment","thin film"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.bibid","label":"Dc Identifier Bibid","values":["6476319"]},{"key":"dc:identifier.uri","label":"Identifier URI","values":["https://hdl.handle.net/1813/7618"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"cerif:openaire","label":"Cerif Openaire","values":["<Publication xmlns=\"https://www.openaire.eu/cerif-profile/1.1/\" id=\"fc3639cb-9e3b-4d3b-afa4-ae9ef2e7af93\"> <Type xmlns=\"https://www.openaire.eu/cerif-profile/vocab/COAR_Publication_Types\">http://purl.org/coar/resource_type/c_1843</Type> <Title>Engineering Surface Morphology at the Atomic Level with Applications in Electronic Materials</Title> <PublishedIn> <Publication> </Publication> </PublishedIn> <PublicationDate>2007-05-24T16:25:13Z</PublicationDate> <Authors> <Author> <DisplayName>Valerian, Ignatescu</DisplayName> <Affiliation> <OrgUnit> </OrgUnit> </Affiliation> </Author> </Authors> <Editors> </Editors> <Publishers> <Publisher> <OrgUnit /> </Publisher> </Publishers> <Keyword>AFM</Keyword> <Keyword>atomic steps</Keyword> <Keyword>surface pre-melting</Keyword> <Keyword>step-free surfaces</Keyword> <Keyword>surface morphology</Keyword> <Keyword>etched craters</Keyword> <Keyword>UHV annealing</Keyword> <Keyword>roughness</Keyword> <Keyword>ridge</Keyword> <Keyword>trench</Keyword> <Keyword>Si(111)</Keyword> <Keyword>dendritic islands</Keyword> <Keyword>fractal dimension</Keyword> <Keyword>(1x1) to (7x7) phase transition</Keyword> <Keyword>MOS capacitor</Keyword> <Keyword>Fowler-Nordheim tunneling</Keyword> <Keyword>leakage current</Keyword> <Keyword>pentacene</Keyword> <Keyword>stepped substrate</Keyword> <Keyword>GIXD</Keyword> <Keyword>azimuthal alignment</Keyword> <Keyword>thin film</Keyword> <Abstract>The silicon (111) and (001) surfaces have wide technological importance. Control of the morphologies of these surfaces at the atomic level is vital for such applications as layer-by-layer growth or assembly of nano-scale devices. We have developed techniques to create large areas with no or widely spaced atomic steps on patterned silicon surfaces by high temperature annealing in ultra-high vacuum (UHV). At annealing temperatures high enough to promote surface premelting, large liquid-like structures form and are preserved during quenching on regions with low step-density since these areas have no efficient sinks to absorb diffusing atoms. Based on the surface morphologies observed by atomic force microscopy, we suggest a sequence of events for the evolution of the silicon surface, from the onset of surface premelting up to the bulk melting temperature. Large dendritic islands observed on the more slowly cooled down Si(111) samples are attributed to the persistence of surface melted structures and to non-equilibrium ?condensation? of the excess adatoms from the (1x1) ? (7x7) phase transition. The effect of UHV high temperature annealing on the Si(111) surface is an initial increase in the measured surface roughness due to Ostwald ripening followed by a surface smoothing to become atomically flat. The boundaries of etched craters or mesas initially develop profiles upon annealing that conform to the predictions of continuum theory of surface transport. As an application, we built MOS capacitors on three types of Si(111) surfaces viz. atomically flat surfaces, normal (stepped) surfaces cleaned in UHV by high-temperature annealing and normal, RCA cleaned wafer surfaces. The leakage current through the oxide was measured for all three cases. Our results show that the smoother the surface before oxidation, the smaller the leakage current. In another application Si(111) substrates with regular arrays of atomic steps were used to induce azimuthal alignment of crystals in thin pentacene films. Pentacene films deposited on heated samples, at a low deposition rate, show significant azimuthal alignment of the pentacene crystals relative to the atomic steps, with the (110) pentacene planes being parallel to the atomic steps.</Abstract> <Access xmlns=\"http://purl.org/coar/access_right\" > </Access> </Publication>"]},{"key":"cris:virtual.author","label":"Cris Virtual Author","values":["Valerian, Ignatescu"]},{"key":"cris:virtualsource.collection","label":"Cris Virtualsource Collection","values":["5893a6ea-7af3-41d7-abc6-04bcd26ab5df"]},{"key":"dc:description.abstract","label":"Abstract","values":["The silicon (111) and (001) surfaces have wide technological importance. Control of the morphologies of these surfaces at the atomic level is vital for such applications as layer-by-layer growth or assembly of nano-scale devices. We have developed techniques to create large areas with no or widely spaced atomic steps on patterned silicon surfaces by high temperature annealing in ultra-high vacuum (UHV). At annealing temperatures high enough to promote surface premelting, large liquid-like structures form and are preserved during quenching on regions with low step-density since these areas have no efficient sinks to absorb diffusing atoms. Based on the surface morphologies observed by atomic force microscopy, we suggest a sequence of events for the evolution of the silicon surface, from the onset of surface premelting up to the bulk melting temperature. Large dendritic islands observed on the more slowly cooled down Si(111) samples are attributed to the persistence of surface melted structures and to non-equilibrium ?condensation? of the excess adatoms from the (1x1) ? (7x7) phase transition. The effect of UHV high temperature annealing on the Si(111) surface is an initial increase in the measured surface roughness due to Ostwald ripening followed by a surface smoothing to become atomically flat. The boundaries of etched craters or mesas initially develop profiles upon annealing that conform to the predictions of continuum theory of surface transport. As an application, we built MOS capacitors on three types of Si(111) surfaces viz. atomically flat surfaces, normal (stepped) surfaces cleaned in UHV by high-temperature annealing and normal, RCA cleaned wafer surfaces. The leakage current through the oxide was measured for all three cases. Our results show that the smoother the surface before oxidation, the smaller the leakage current. In another application Si(111) substrates with regular arrays of atomic steps were used to induce azimuthal alignment of crystals in thin pentacene films. Pentacene films deposited on heated samples, at a low deposition rate, show significant azimuthal alignment of the pentacene crystals relative to the atomic steps, with the (110) pentacene planes being parallel to the atomic steps."]},{"key":"dc:description.collection","label":"Dc Description Collection","values":["Cornell Theses and Dissertations"]},{"key":"dc:description.sponsorship","label":"Dc Description Sponsorship","values":["Cornell Center for Materials Research (CCMR) grant number DMR-0079992 National Science Foundation (NSF) grant number DMR-0109641"]},{"key":"dc:format.extent","label":"Dc Format Extent","values":["5474896 bytes"]},{"key":"dc:format.mimetype","label":"Dc Format Mimetype","values":["application/pdf"]},{"key":"dc:title","label":"Title","values":["Engineering Surface Morphology at the Atomic Level with Applications in Electronic Materials"]},{"key":"dspace:entity.type","label":"Dspace Entity Type","values":["Publication"]},{"key":"others:access_status","label":"Others Access Status","values":["open.access"]}]}],"canonical_facts":{"cerif:openaire":["<Publication xmlns=\"https://www.openaire.eu/cerif-profile/1.1/\" id=\"fc3639cb-9e3b-4d3b-afa4-ae9ef2e7af93\"> <Type xmlns=\"https://www.openaire.eu/cerif-profile/vocab/COAR_Publication_Types\">http://purl.org/coar/resource_type/c_1843</Type> <Title>Engineering Surface Morphology at the Atomic Level with Applications in Electronic Materials</Title> <PublishedIn> <Publication> </Publication> </PublishedIn> <PublicationDate>2007-05-24T16:25:13Z</PublicationDate> <Authors> <Author> <DisplayName>Valerian, Ignatescu</DisplayName> <Affiliation> <OrgUnit> </OrgUnit> </Affiliation> </Author> </Authors> <Editors> </Editors> <Publishers> <Publisher> <OrgUnit /> </Publisher> </Publishers> <Keyword>AFM</Keyword> <Keyword>atomic steps</Keyword> <Keyword>surface pre-melting</Keyword> <Keyword>step-free surfaces</Keyword> <Keyword>surface morphology</Keyword> <Keyword>etched craters</Keyword> <Keyword>UHV annealing</Keyword> <Keyword>roughness</Keyword> <Keyword>ridge</Keyword> <Keyword>trench</Keyword> <Keyword>Si(111)</Keyword> <Keyword>dendritic islands</Keyword> <Keyword>fractal dimension</Keyword> <Keyword>(1x1) to (7x7) phase transition</Keyword> <Keyword>MOS capacitor</Keyword> <Keyword>Fowler-Nordheim tunneling</Keyword> <Keyword>leakage current</Keyword> <Keyword>pentacene</Keyword> <Keyword>stepped substrate</Keyword> <Keyword>GIXD</Keyword> <Keyword>azimuthal alignment</Keyword> <Keyword>thin film</Keyword> <Abstract>The silicon (111) and (001) surfaces have wide technological importance. Control of the morphologies of these surfaces at the atomic level is vital for such applications as layer-by-layer growth or assembly of nano-scale devices. We have developed techniques to create large areas with no or widely spaced atomic steps on patterned silicon surfaces by high temperature annealing in ultra-high vacuum (UHV). At annealing temperatures high enough to promote surface premelting, large liquid-like structures form and are preserved during quenching on regions with low step-density since these areas have no efficient sinks to absorb diffusing atoms. Based on the surface morphologies observed by atomic force microscopy, we suggest a sequence of events for the evolution of the silicon surface, from the onset of surface premelting up to the bulk melting temperature. Large dendritic islands observed on the more slowly cooled down Si(111) samples are attributed to the persistence of surface melted structures and to non-equilibrium ?condensation? of the excess adatoms from the (1x1) ? (7x7) phase transition. The effect of UHV high temperature annealing on the Si(111) surface is an initial increase in the measured surface roughness due to Ostwald ripening followed by a surface smoothing to become atomically flat. The boundaries of etched craters or mesas initially develop profiles upon annealing that conform to the predictions of continuum theory of surface transport. As an application, we built MOS capacitors on three types of Si(111) surfaces viz. atomically flat surfaces, normal (stepped) surfaces cleaned in UHV by high-temperature annealing and normal, RCA cleaned wafer surfaces. The leakage current through the oxide was measured for all three cases. Our results show that the smoother the surface before oxidation, the smaller the leakage current. In another application Si(111) substrates with regular arrays of atomic steps were used to induce azimuthal alignment of crystals in thin pentacene films. Pentacene films deposited on heated samples, at a low deposition rate, show significant azimuthal alignment of the pentacene crystals relative to the atomic steps, with the (110) pentacene planes being parallel to the atomic steps.</Abstract> <Access xmlns=\"http://purl.org/coar/access_right\" > </Access> </Publication>"],"cris:virtual.author":["Valerian, Ignatescu"],"cris:virtualsource.collection":["5893a6ea-7af3-41d7-abc6-04bcd26ab5df"],"dc:creator":["Valerian, Ignatescu"],"dc:date.accessioned":["2007-05-24T16:25:13Z"],"dc:date.available":["2012-05-24T06:38:42Z"],"dc:date.issued":["2007-05-24T16:25:13Z"],"dc:description.abstract":["The silicon (111) and (001) surfaces have wide technological importance. Control of the morphologies of these surfaces at the atomic level is vital for such applications as layer-by-layer growth or assembly of nano-scale devices. We have developed techniques to create large areas with no or widely spaced atomic steps on patterned silicon surfaces by high temperature annealing in ultra-high vacuum (UHV). At annealing temperatures high enough to promote surface premelting, large liquid-like structures form and are preserved during quenching on regions with low step-density since these areas have no efficient sinks to absorb diffusing atoms. Based on the surface morphologies observed by atomic force microscopy, we suggest a sequence of events for the evolution of the silicon surface, from the onset of surface premelting up to the bulk melting temperature. Large dendritic islands observed on the more slowly cooled down Si(111) samples are attributed to the persistence of surface melted structures and to non-equilibrium ?condensation? of the excess adatoms from the (1x1) ? (7x7) phase transition. The effect of UHV high temperature annealing on the Si(111) surface is an initial increase in the measured surface roughness due to Ostwald ripening followed by a surface smoothing to become atomically flat. The boundaries of etched craters or mesas initially develop profiles upon annealing that conform to the predictions of continuum theory of surface transport. As an application, we built MOS capacitors on three types of Si(111) surfaces viz. atomically flat surfaces, normal (stepped) surfaces cleaned in UHV by high-temperature annealing and normal, RCA cleaned wafer surfaces. The leakage current through the oxide was measured for all three cases. Our results show that the smoother the surface before oxidation, the smaller the leakage current. In another application Si(111) substrates with regular arrays of atomic steps were used to induce azimuthal alignment of crystals in thin pentacene films. Pentacene films deposited on heated samples, at a low deposition rate, show significant azimuthal alignment of the pentacene crystals relative to the atomic steps, with the (110) pentacene planes being parallel to the atomic steps."],"dc:description.collection":["Cornell Theses and Dissertations"],"dc:description.sponsorship":["Cornell Center for Materials Research (CCMR) grant number DMR-0079992 National Science Foundation (NSF) grant number DMR-0109641"],"dc:format.extent":["5474896 bytes"],"dc:format.mimetype":["application/pdf"],"dc:identifier.bibid":["6476319"],"dc:identifier.uri":["https://hdl.handle.net/1813/7618"],"dc:subject":["AFM","atomic steps","surface pre-melting","step-free surfaces","surface morphology","etched craters","UHV annealing","roughness","ridge","trench","Si(111)","dendritic islands","fractal dimension","(1x1) to (7x7) phase transition","MOS capacitor","Fowler-Nordheim tunneling","leakage current","pentacene","stepped substrate","GIXD","azimuthal alignment","thin film"],"dc:title":["Engineering Surface Morphology at the Atomic Level with Applications in Electronic Materials"],"dc:type":["dissertation or thesis"],"dspace:entity.type":["Publication"],"others:access_status":["open.access"]},"updated_at":"2026-11-19T03:21:11Z"}