{"id":{"repo_id":"cornell","oai_identifier":"oai:ecommons.cornell.edu:1813/773"},"canonical_url":"https://search.ndltd.org/etd/cornell/oai:ecommons.cornell.edu:1813/773","repository":{"repo_id":"cornell","name":"Cornell University","base_url":"https://ecommons.cornell.edu/server/oai/request"},"display":{"title":"Starch-Polycaprolactone Nanocomposites From Reactive Extrusion: Synthesis, Characterization, Properties And Scale-up Considerations","abstract":"Biodegradable starch-polyester polymer composites are useful in many applications ranging from numerous packaging end-uses to tissue engineering. However the amount of starch that can form composites with polyesters without significant property deterioration is typically less than 25% because of thermodynamic incompatibility between the two polymers. A reactive extrusion process was developed in which approximately 60% by weight of plasticized starch was blended with a biodegradable polyester (polycaprolactone, PCL) resulting in tough nanocomposite blends with elongational properties approaching that of 100% PCL. During the extrusion process, starch was cross-linked with polycaprolactone in the presence of hydrogen peroxide and montmorillonite (MMT) organoclay, thus compatibilizing the two polymers. The objectives of this study were to evaluate the mechanical properties of reactively extruded starch-PCL nanocomposite blends, study changes in the morphology of polymer-polymer interface, monitor dispersion of organoclay in the polymer matrix, quantify the effects of reactive extrusion on polymer glass transition, develop a rheological model and scale up the reactive extrusion process from a batch type micro-extruder to continuous twin-screw extruder. Starch and PCL (36-39 wt% each), glycerol (18-19 wt%), MMT organoclay (3-9 wt%), hydrogen peroxide (0.067 ml/g starch) and ferrous sulfate catalyst (0.0025 g/g starch) were extruded in a co-rotating twin-screw extruder at 120 C and injection molded at 150 C. Elongational properties of reactively extruded starch-PCL nanocomposite blends approached that of 100% PCL at 3 and 6 wt% organoclay. Strength and modulus remained the same as starch-PCL composites prepared from simple physical mixing (non-reactive extrusion). X-ray diffraction results showed mainly intercalated flocculated behavior of clay at 3, 6, and 9 wt% organoclay. Scanning electron microscopy (SEM) showed that there was improved starch-PCL interfacial adhesion in reactively extruded blends than in non-reactive starch-PCL composites. Dynamic mechanical analysis showed changes in primary alpha- transition temperatures for both the starch and PCL fractions, reflecting cross-linking changes in the nanocomposite blends at different organoclay content. Starch-PCL reactive blends were more pseudoplastic than 100% PCL and showed typical shear-thinning behavior and lower shear viscosities than non-reactive starch-PCL composites. Results from scale-up studies indicated that screw configuration, screw speed and feed rates were important process variables that affected material properties. These were optimized to obtain mechanical properties equivalent to those from the micro-extruder.","abstract_html":"Biodegradable starch-polyester polymer composites are useful in many applications ranging from numerous packaging end-uses to tissue engineering. However the amount of starch that can form composites with polyesters without significant property deterioration is typically less than 25% because of thermodynamic incompatibility between the two polymers. A reactive extrusion process was developed in which approximately 60% by weight of plasticized starch was blended with a biodegradable polyester (polycaprolactone, PCL) resulting in tough nanocomposite blends with elongational properties approaching that of 100% PCL. During the extrusion process, starch was cross-linked with polycaprolactone in the presence of hydrogen peroxide and montmorillonite (MMT) organoclay, thus compatibilizing the two polymers. The objectives of this study were to evaluate the mechanical properties of reactively extruded starch-PCL nanocomposite blends, study changes in the morphology of polymer-polymer interface, monitor dispersion of organoclay in the polymer matrix, quantify the effects of reactive extrusion on polymer glass transition, develop a rheological model and scale up the reactive extrusion process from a batch type micro-extruder to continuous twin-screw extruder. Starch and PCL (36-39 wt% each), glycerol (18-19 wt%), MMT organoclay (3-9 wt%), hydrogen peroxide (0.067 ml/g starch) and ferrous sulfate catalyst (0.0025 g/g starch) were extruded in a co-rotating twin-screw extruder at 120 C and injection molded at 150 C. Elongational properties of reactively extruded starch-PCL nanocomposite blends approached that of 100% PCL at 3 and 6 wt% organoclay. Strength and modulus remained the same as starch-PCL composites prepared from simple physical mixing (non-reactive extrusion). X-ray diffraction results showed mainly intercalated flocculated behavior of clay at 3, 6, and 9 wt% organoclay. Scanning electron microscopy (SEM) showed that there was improved starch-PCL interfacial adhesion in reactively extruded blends than in non-reactive starch-PCL composites. Dynamic mechanical analysis showed changes in primary alpha- transition temperatures for both the starch and PCL fractions, reflecting cross-linking changes in the nanocomposite blends at different organoclay content. Starch-PCL reactive blends were more pseudoplastic than 100% PCL and showed typical shear-thinning behavior and lower shear viscosities than non-reactive starch-PCL composites. Results from scale-up studies indicated that screw configuration, screw speed and feed rates were important process variables that affected material properties. These were optimized to obtain mechanical properties equivalent to those from the micro-extruder.","abstract_has_math":false,"creators":["Sathyanarayanan, Kalambur"],"institution":null,"degree_name":null,"degree_level":null,"degree_discipline":null,"degree_department":null,"school":null,"contributors":[],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2005,"date_issued":"2005-04-11T13:31:08Z","date_published":"2005-04-11T13:31:08Z","updated_at":"2026-11-19T03:21:11Z","subjects":["reactive extrusion, biodegradable plastic, organoclay, nanocomposites, starch, polycaprolactone, Power law, pseudoplasticity"],"languages":["en"],"rights":[],"rights_urls":[],"identifier_entries":[{"key":"dc:identifier.bibid","label":"Dc Identifier Bibid","values":["6475805"],"render_values":[{"text":"6475805","href":null,"code":true}]}],"person_identifier_entries":[]},"links":{"outbound_url":"https://hdl.handle.net/1813/773","outbound_label":"Handle","outbound_source":"dc:identifier.uri","record_url":"https://hdl.handle.net/1813/773","record_label":"Repository record","record_kind":"handle","record_source":"dc:identifier.uri","download_url":null,"download_label":null,"download_source":null,"access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://ecommons.cornell.edu/server/oai/request?verb=GetRecord&metadataPrefix=dim&identifier=oai%3Aecommons.cornell.edu%3A1813%2F773","prefix":"dim"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:creator","label":"Author","values":["Sathyanarayanan, Kalambur"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.accessioned","label":"Dc Date Accessioned","values":["2005-04-11T13:31:08Z"]},{"key":"dc:date.available","label":"Dc Date Available","values":["2005-04-11T13:31:08Z"]},{"key":"dc:date.issued","label":"Date","values":["2005-04-11T13:31:08Z"]},{"key":"dc:type","label":"Dc Type","values":["dissertation or thesis"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["reactive extrusion, biodegradable plastic, organoclay, nanocomposites, starch, polycaprolactone, Power law, pseudoplasticity"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.iso","label":"Language (ISO)","values":["en"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.bibid","label":"Dc Identifier Bibid","values":["6475805"]},{"key":"dc:identifier.uri","label":"Identifier URI","values":["https://hdl.handle.net/1813/773"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"cerif:openaire","label":"Cerif Openaire","values":["<Publication xmlns=\"https://www.openaire.eu/cerif-profile/1.1/\" id=\"3bce6025-efe4-48ca-8b56-69b75b542d65\"> <Type xmlns=\"https://www.openaire.eu/cerif-profile/vocab/COAR_Publication_Types\">http://purl.org/coar/resource_type/c_1843</Type> <Language>en</Language> <Title>Starch-Polycaprolactone Nanocomposites From Reactive Extrusion: Synthesis, Characterization, Properties And Scale-up Considerations</Title> <PublishedIn> <Publication> </Publication> </PublishedIn> <PublicationDate>2005-04-11T13:31:08Z</PublicationDate> <Authors> <Author> <DisplayName>Sathyanarayanan, Kalambur</DisplayName> <Affiliation> <OrgUnit> </OrgUnit> </Affiliation> </Author> </Authors> <Editors> </Editors> <Publishers> <Publisher> <OrgUnit /> </Publisher> </Publishers> <Keyword>reactive extrusion, biodegradable plastic, organoclay, nanocomposites, starch, polycaprolactone, Power law, pseudoplasticity</Keyword> <Abstract>Biodegradable starch-polyester polymer composites are useful in many applications ranging from numerous packaging end-uses to tissue engineering. However the amount of starch that can form composites with polyesters without significant property deterioration is typically less than 25% because of thermodynamic incompatibility between the two polymers. A reactive extrusion process was developed in which approximately 60% by weight of plasticized starch was blended with a biodegradable polyester (polycaprolactone, PCL) resulting in tough nanocomposite blends with elongational properties approaching that of 100% PCL. During the extrusion process, starch was cross-linked with polycaprolactone in the presence of hydrogen peroxide and montmorillonite (MMT) organoclay, thus compatibilizing the two polymers. The objectives of this study were to evaluate the mechanical properties of reactively extruded starch-PCL nanocomposite blends, study changes in the morphology of polymer-polymer interface, monitor dispersion of organoclay in the polymer matrix, quantify the effects of reactive extrusion on polymer glass transition, develop a rheological model and scale up the reactive extrusion process from a batch type micro-extruder to continuous twin-screw extruder. Starch and PCL (36-39 wt% each), glycerol (18-19 wt%), MMT organoclay (3-9 wt%), hydrogen peroxide (0.067 ml/g starch) and ferrous sulfate catalyst (0.0025 g/g starch) were extruded in a co-rotating twin-screw extruder at 120 C and injection molded at 150 C. Elongational properties of reactively extruded starch-PCL nanocomposite blends approached that of 100% PCL at 3 and 6 wt% organoclay. Strength and modulus remained the same as starch-PCL composites prepared from simple physical mixing (non-reactive extrusion). X-ray diffraction results showed mainly intercalated flocculated behavior of clay at 3, 6, and 9 wt% organoclay. Scanning electron microscopy (SEM) showed that there was improved starch-PCL interfacial adhesion in reactively extruded blends than in non-reactive starch-PCL composites. Dynamic mechanical analysis showed changes in primary alpha- transition temperatures for both the starch and PCL fractions, reflecting cross-linking changes in the nanocomposite blends at different organoclay content. Starch-PCL reactive blends were more pseudoplastic than 100% PCL and showed typical shear-thinning behavior and lower shear viscosities than non-reactive starch-PCL composites. Results from scale-up studies indicated that screw configuration, screw speed and feed rates were important process variables that affected material properties. These were optimized to obtain mechanical properties equivalent to those from the micro-extruder.</Abstract> <Access xmlns=\"http://purl.org/coar/access_right\" > </Access> </Publication>"]},{"key":"cris:virtual.author","label":"Cris Virtual Author","values":["Sathyanarayanan, Kalambur"]},{"key":"cris:virtualsource.collection","label":"Cris Virtualsource Collection","values":["5893a6ea-7af3-41d7-abc6-04bcd26ab5df"]},{"key":"dc:description.abstract","label":"Abstract","values":["Biodegradable starch-polyester polymer composites are useful in many applications ranging from numerous packaging end-uses to tissue engineering. However the amount of starch that can form composites with polyesters without significant property deterioration is typically less than 25% because of thermodynamic incompatibility between the two polymers. A reactive extrusion process was developed in which approximately 60% by weight of plasticized starch was blended with a biodegradable polyester (polycaprolactone, PCL) resulting in tough nanocomposite blends with elongational properties approaching that of 100% PCL. During the extrusion process, starch was cross-linked with polycaprolactone in the presence of hydrogen peroxide and montmorillonite (MMT) organoclay, thus compatibilizing the two polymers. The objectives of this study were to evaluate the mechanical properties of reactively extruded starch-PCL nanocomposite blends, study changes in the morphology of polymer-polymer interface, monitor dispersion of organoclay in the polymer matrix, quantify the effects of reactive extrusion on polymer glass transition, develop a rheological model and scale up the reactive extrusion process from a batch type micro-extruder to continuous twin-screw extruder. Starch and PCL (36-39 wt% each), glycerol (18-19 wt%), MMT organoclay (3-9 wt%), hydrogen peroxide (0.067 ml/g starch) and ferrous sulfate catalyst (0.0025 g/g starch) were extruded in a co-rotating twin-screw extruder at 120 C and injection molded at 150 C. Elongational properties of reactively extruded starch-PCL nanocomposite blends approached that of 100% PCL at 3 and 6 wt% organoclay. Strength and modulus remained the same as starch-PCL composites prepared from simple physical mixing (non-reactive extrusion). X-ray diffraction results showed mainly intercalated flocculated behavior of clay at 3, 6, and 9 wt% organoclay. Scanning electron microscopy (SEM) showed that there was improved starch-PCL interfacial adhesion in reactively extruded blends than in non-reactive starch-PCL composites. Dynamic mechanical analysis showed changes in primary alpha- transition temperatures for both the starch and PCL fractions, reflecting cross-linking changes in the nanocomposite blends at different organoclay content. Starch-PCL reactive blends were more pseudoplastic than 100% PCL and showed typical shear-thinning behavior and lower shear viscosities than non-reactive starch-PCL composites. Results from scale-up studies indicated that screw configuration, screw speed and feed rates were important process variables that affected material properties. These were optimized to obtain mechanical properties equivalent to those from the micro-extruder."]},{"key":"dc:description.collection","label":"Dc Description Collection","values":["Cornell Theses and Dissertations"]},{"key":"dc:description.sponsorship","label":"Dc Description Sponsorship","values":["USDA-National Research Initiative"]},{"key":"dc:format.extent","label":"Dc Format Extent","values":["20259 bytes","546047 bytes","195743 bytes","311747 bytes","148870 bytes","10762 bytes","7839 bytes","7973 bytes","17657 bytes","5825 bytes","6241 bytes"]},{"key":"dc:format.mimetype","label":"Dc Format Mimetype","values":["application/pdf"]},{"key":"dc:title","label":"Title","values":["Starch-Polycaprolactone Nanocomposites From Reactive Extrusion: Synthesis, Characterization, Properties And Scale-up Considerations"]},{"key":"dspace:entity.type","label":"Dspace Entity Type","values":["Publication"]},{"key":"others:access_status","label":"Others Access Status","values":["open.access"]}]}],"canonical_facts":{"cerif:openaire":["<Publication xmlns=\"https://www.openaire.eu/cerif-profile/1.1/\" id=\"3bce6025-efe4-48ca-8b56-69b75b542d65\"> <Type xmlns=\"https://www.openaire.eu/cerif-profile/vocab/COAR_Publication_Types\">http://purl.org/coar/resource_type/c_1843</Type> <Language>en</Language> <Title>Starch-Polycaprolactone Nanocomposites From Reactive Extrusion: Synthesis, Characterization, Properties And Scale-up Considerations</Title> <PublishedIn> <Publication> </Publication> </PublishedIn> <PublicationDate>2005-04-11T13:31:08Z</PublicationDate> <Authors> <Author> <DisplayName>Sathyanarayanan, Kalambur</DisplayName> <Affiliation> <OrgUnit> </OrgUnit> </Affiliation> </Author> </Authors> <Editors> </Editors> <Publishers> <Publisher> <OrgUnit /> </Publisher> </Publishers> <Keyword>reactive extrusion, biodegradable plastic, organoclay, nanocomposites, starch, polycaprolactone, Power law, pseudoplasticity</Keyword> <Abstract>Biodegradable starch-polyester polymer composites are useful in many applications ranging from numerous packaging end-uses to tissue engineering. However the amount of starch that can form composites with polyesters without significant property deterioration is typically less than 25% because of thermodynamic incompatibility between the two polymers. A reactive extrusion process was developed in which approximately 60% by weight of plasticized starch was blended with a biodegradable polyester (polycaprolactone, PCL) resulting in tough nanocomposite blends with elongational properties approaching that of 100% PCL. During the extrusion process, starch was cross-linked with polycaprolactone in the presence of hydrogen peroxide and montmorillonite (MMT) organoclay, thus compatibilizing the two polymers. The objectives of this study were to evaluate the mechanical properties of reactively extruded starch-PCL nanocomposite blends, study changes in the morphology of polymer-polymer interface, monitor dispersion of organoclay in the polymer matrix, quantify the effects of reactive extrusion on polymer glass transition, develop a rheological model and scale up the reactive extrusion process from a batch type micro-extruder to continuous twin-screw extruder. Starch and PCL (36-39 wt% each), glycerol (18-19 wt%), MMT organoclay (3-9 wt%), hydrogen peroxide (0.067 ml/g starch) and ferrous sulfate catalyst (0.0025 g/g starch) were extruded in a co-rotating twin-screw extruder at 120 C and injection molded at 150 C. Elongational properties of reactively extruded starch-PCL nanocomposite blends approached that of 100% PCL at 3 and 6 wt% organoclay. Strength and modulus remained the same as starch-PCL composites prepared from simple physical mixing (non-reactive extrusion). X-ray diffraction results showed mainly intercalated flocculated behavior of clay at 3, 6, and 9 wt% organoclay. Scanning electron microscopy (SEM) showed that there was improved starch-PCL interfacial adhesion in reactively extruded blends than in non-reactive starch-PCL composites. Dynamic mechanical analysis showed changes in primary alpha- transition temperatures for both the starch and PCL fractions, reflecting cross-linking changes in the nanocomposite blends at different organoclay content. Starch-PCL reactive blends were more pseudoplastic than 100% PCL and showed typical shear-thinning behavior and lower shear viscosities than non-reactive starch-PCL composites. Results from scale-up studies indicated that screw configuration, screw speed and feed rates were important process variables that affected material properties. These were optimized to obtain mechanical properties equivalent to those from the micro-extruder.</Abstract> <Access xmlns=\"http://purl.org/coar/access_right\" > </Access> </Publication>"],"cris:virtual.author":["Sathyanarayanan, Kalambur"],"cris:virtualsource.collection":["5893a6ea-7af3-41d7-abc6-04bcd26ab5df"],"dc:creator":["Sathyanarayanan, Kalambur"],"dc:date.accessioned":["2005-04-11T13:31:08Z"],"dc:date.available":["2005-04-11T13:31:08Z"],"dc:date.issued":["2005-04-11T13:31:08Z"],"dc:description.abstract":["Biodegradable starch-polyester polymer composites are useful in many applications ranging from numerous packaging end-uses to tissue engineering. However the amount of starch that can form composites with polyesters without significant property deterioration is typically less than 25% because of thermodynamic incompatibility between the two polymers. A reactive extrusion process was developed in which approximately 60% by weight of plasticized starch was blended with a biodegradable polyester (polycaprolactone, PCL) resulting in tough nanocomposite blends with elongational properties approaching that of 100% PCL. During the extrusion process, starch was cross-linked with polycaprolactone in the presence of hydrogen peroxide and montmorillonite (MMT) organoclay, thus compatibilizing the two polymers. The objectives of this study were to evaluate the mechanical properties of reactively extruded starch-PCL nanocomposite blends, study changes in the morphology of polymer-polymer interface, monitor dispersion of organoclay in the polymer matrix, quantify the effects of reactive extrusion on polymer glass transition, develop a rheological model and scale up the reactive extrusion process from a batch type micro-extruder to continuous twin-screw extruder. Starch and PCL (36-39 wt% each), glycerol (18-19 wt%), MMT organoclay (3-9 wt%), hydrogen peroxide (0.067 ml/g starch) and ferrous sulfate catalyst (0.0025 g/g starch) were extruded in a co-rotating twin-screw extruder at 120 C and injection molded at 150 C. Elongational properties of reactively extruded starch-PCL nanocomposite blends approached that of 100% PCL at 3 and 6 wt% organoclay. Strength and modulus remained the same as starch-PCL composites prepared from simple physical mixing (non-reactive extrusion). X-ray diffraction results showed mainly intercalated flocculated behavior of clay at 3, 6, and 9 wt% organoclay. Scanning electron microscopy (SEM) showed that there was improved starch-PCL interfacial adhesion in reactively extruded blends than in non-reactive starch-PCL composites. Dynamic mechanical analysis showed changes in primary alpha- transition temperatures for both the starch and PCL fractions, reflecting cross-linking changes in the nanocomposite blends at different organoclay content. Starch-PCL reactive blends were more pseudoplastic than 100% PCL and showed typical shear-thinning behavior and lower shear viscosities than non-reactive starch-PCL composites. Results from scale-up studies indicated that screw configuration, screw speed and feed rates were important process variables that affected material properties. These were optimized to obtain mechanical properties equivalent to those from the micro-extruder."],"dc:description.collection":["Cornell Theses and Dissertations"],"dc:description.sponsorship":["USDA-National Research Initiative"],"dc:format.extent":["20259 bytes","546047 bytes","195743 bytes","311747 bytes","148870 bytes","10762 bytes","7839 bytes","7973 bytes","17657 bytes","5825 bytes","6241 bytes"],"dc:format.mimetype":["application/pdf"],"dc:identifier.bibid":["6475805"],"dc:identifier.uri":["https://hdl.handle.net/1813/773"],"dc:language.iso":["en"],"dc:subject":["reactive extrusion, biodegradable plastic, organoclay, nanocomposites, starch, polycaprolactone, Power law, pseudoplasticity"],"dc:title":["Starch-Polycaprolactone Nanocomposites From Reactive Extrusion: Synthesis, Characterization, Properties And Scale-up Considerations"],"dc:type":["dissertation or thesis"],"dspace:entity.type":["Publication"],"others:access_status":["open.access"]},"updated_at":"2026-11-19T03:21:11Z"}