{"id":{"repo_id":"glasgow","oai_identifier":"oai:theses.gla.ac.uk:5380"},"canonical_url":"https://search.ndltd.org/etd/glasgow/oai:theses.gla.ac.uk:5380","repository":{"repo_id":"glasgow","name":"University of Glasgow","base_url":"https://theses.gla.ac.uk/cgi/oai2"},"display":{"title":"An experimental investigation into the influence of trailing-edge separation on an aerofoil's dynamic stall performance","abstract":"The influence of trailing-edge separation on the dynamic stall characteristics of a typical rotor section is at present unclear. Although previous research has given a fundamental understanding of the unsteady stall process, the variety of aerofoils tested has made it difficult to isolate the effect of trailing-edge separation. Further investigation into this field may be carried out by testing two similar aerofoils which differ only in their trailing-edge separation characteristics. The early part of the work concentrated on the development of a numerical method whereby the theoretical pressure gradient over the trailing-edge upper surface of a given aerofoil may be modified to either enhance or reduce such separation. Since previous work at the University of Glasgow had included a detailed unsteady aerodynamic study of a NACA 23012 aerofoil, this was the appropriate profile for modification. The above technique was applied to this aerofoil with the objective of modifying the geometry in such a manner that would retain the leading-edge pressure distribution whilst forcing an earlier and more gradual trailing-edge separation growth. The subsequently designed aerofoil, designated the NACA 23012(A), was shown to display an enhancement of the trailing-edge separation characteristics via both boundary-layer calculations and oil-flow visualisation tests. On comparison with unsteady data previously collected for the NACA 23012, several systematic methods of estimating the effects of trailing-edge separation on the dynamic stall process are presented. During oscillatory tests the NACA 23012(A) displayed a more stable damping characteristic which was attributed to the enhanced trailing-edge separation producing an earlier pitching-moment break. Based on the analysis of pressure-time histories obtained during ramp tests, it was deduced that a consequence of significant trailing-edge separation was to delay the initiation of the dynamic stall vortex. Detailed analysis of hot-film data led to the conclusion that aerofoils which display a tendency to stall in steady conditions, via separation growth from the trailing-edge, will experience vortex initiation by the breakdown of a thin layer of reversed flow travelling upstream beneath a stable shear layer which remains in close proximity to the aerofoil's surface contour.","abstract_html":"The influence of trailing-edge separation on the dynamic stall characteristics of a typical rotor section is at present unclear. Although previous research has given a fundamental understanding of the unsteady stall process, the variety of aerofoils tested has made it difficult to isolate the effect of trailing-edge separation. Further investigation into this field may be carried out by testing two similar aerofoils which differ only in their trailing-edge separation characteristics. The early part of the work concentrated on the development of a numerical method whereby the theoretical pressure gradient over the trailing-edge upper surface of a given aerofoil may be modified to either enhance or reduce such separation. Since previous work at the University of Glasgow had included a detailed unsteady aerodynamic study of a NACA 23012 aerofoil, this was the appropriate profile for modification. The above technique was applied to this aerofoil with the objective of modifying the geometry in such a manner that would retain the leading-edge pressure distribution whilst forcing an earlier and more gradual trailing-edge separation growth. The subsequently designed aerofoil, designated the NACA 23012(A), was shown to display an enhancement of the trailing-edge separation characteristics via both boundary-layer calculations and oil-flow visualisation tests. On comparison with unsteady data previously collected for the NACA 23012, several systematic methods of estimating the effects of trailing-edge separation on the dynamic stall process are presented. During oscillatory tests the NACA 23012(A) displayed a more stable damping characteristic which was attributed to the enhanced trailing-edge separation producing an earlier pitching-moment break. Based on the analysis of pressure-time histories obtained during ramp tests, it was deduced that a consequence of significant trailing-edge separation was to delay the initiation of the dynamic stall vortex. Detailed analysis of hot-film data led to the conclusion that aerofoils which display a tendency to stall in steady conditions, via separation growth from the trailing-edge, will experience vortex initiation by the breakdown of a thin layer of reversed flow travelling upstream beneath a stable shear layer which remains in close proximity to the aerofoil&#x27;s surface contour.","abstract_has_math":false,"creators":["Niven, Andrew James"],"institution":"University of Glasgow","degree_name":null,"degree_level":"PhD","degree_discipline":null,"degree_department":null,"school":null,"contributors":[],"advisors":[],"committee_chairs":[],"committee_members":[],"year":1988,"date_issued":"1988","date_published":"1988","updated_at":"2026-11-19T08:23:40Z","subjects":["TL Motor vehicles. Aeronautics. Astronautics"],"languages":["en"],"rights":[],"rights_urls":[],"identifier_entries":[],"person_identifier_entries":[]},"links":{"outbound_url":null,"outbound_label":null,"outbound_source":null,"record_url":null,"record_label":null,"record_kind":null,"record_source":null,"download_url":"https://theses.gla.ac.uk/5380/1/1988NivenPhd.pdf","download_label":"Download PDF","download_source":"dc:identifier.uri","access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://theses.gla.ac.uk/cgi/oai2?verb=GetRecord&metadataPrefix=uketd_dc&identifier=oai%3Atheses.gla.ac.uk%3A5380","prefix":"uketd_dc"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:creator","label":"Author","values":["Niven, Andrew James"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["1988"]},{"key":"dc:date.issued","label":"Date","values":["1988"]},{"key":"dc:publisher.institution","label":"Dc Publisher Institution","values":["University of Glasgow"]},{"key":"dc:relation.isreferencedby","label":"Dc Relation Isreferencedby","values":["https://theses.gla.ac.uk/5380/"]},{"key":"dc:relation.isreferencedby.uri","label":"Dc Relation Isreferencedby URI","values":["https://gla.on.worldcat.org/oclc/309028604"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"dc:type.qualificationlevel","label":"Dc Type Qualificationlevel","values":["PhD"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["TL Motor vehicles. Aeronautics. Astronautics"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language","label":"Dc Language","values":["en"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["https://theses.gla.ac.uk/5380/1/1988NivenPhd.pdf"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["The influence of trailing-edge separation on the dynamic stall characteristics of a typical rotor section is at present unclear. Although previous research has given a fundamental understanding of the unsteady stall process, the variety of aerofoils tested has made it difficult to isolate the effect of trailing-edge separation. Further investigation into this field may be carried out by testing two similar aerofoils which differ only in their trailing-edge separation characteristics. The early part of the work concentrated on the development of a numerical method whereby the theoretical pressure gradient over the trailing-edge upper surface of a given aerofoil may be modified to either enhance or reduce such separation. Since previous work at the University of Glasgow had included a detailed unsteady aerodynamic study of a NACA 23012 aerofoil, this was the appropriate profile for modification. The above technique was applied to this aerofoil with the objective of modifying the geometry in such a manner that would retain the leading-edge pressure distribution whilst forcing an earlier and more gradual trailing-edge separation growth. The subsequently designed aerofoil, designated the NACA 23012(A), was shown to display an enhancement of the trailing-edge separation characteristics via both boundary-layer calculations and oil-flow visualisation tests. On comparison with unsteady data previously collected for the NACA 23012, several systematic methods of estimating the effects of trailing-edge separation on the dynamic stall process are presented. During oscillatory tests the NACA 23012(A) displayed a more stable damping characteristic which was attributed to the enhanced trailing-edge separation producing an earlier pitching-moment break. Based on the analysis of pressure-time histories obtained during ramp tests, it was deduced that a consequence of significant trailing-edge separation was to delay the initiation of the dynamic stall vortex. Detailed analysis of hot-film data led to the conclusion that aerofoils which display a tendency to stall in steady conditions, via separation growth from the trailing-edge, will experience vortex initiation by the breakdown of a thin layer of reversed flow travelling upstream beneath a stable shear layer which remains in close proximity to the aerofoil's surface contour."]},{"key":"dc:format","label":"Dc Format","values":["pdf"]},{"key":"dcterms:accessrights","label":"Dcterms Accessrights","values":["public"]},{"key":"dc:title","label":"Title","values":["An experimental investigation into the influence of trailing-edge separation on an aerofoil's dynamic stall performance"]}]}],"canonical_facts":{"dc:creator":["Niven, Andrew James"],"dc:date":["1988"],"dc:date.issued":["1988"],"dc:description.abstract":["The influence of trailing-edge separation on the dynamic stall characteristics of a typical rotor section is at present unclear. Although previous research has given a fundamental understanding of the unsteady stall process, the variety of aerofoils tested has made it difficult to isolate the effect of trailing-edge separation. Further investigation into this field may be carried out by testing two similar aerofoils which differ only in their trailing-edge separation characteristics. The early part of the work concentrated on the development of a numerical method whereby the theoretical pressure gradient over the trailing-edge upper surface of a given aerofoil may be modified to either enhance or reduce such separation. Since previous work at the University of Glasgow had included a detailed unsteady aerodynamic study of a NACA 23012 aerofoil, this was the appropriate profile for modification. The above technique was applied to this aerofoil with the objective of modifying the geometry in such a manner that would retain the leading-edge pressure distribution whilst forcing an earlier and more gradual trailing-edge separation growth. The subsequently designed aerofoil, designated the NACA 23012(A), was shown to display an enhancement of the trailing-edge separation characteristics via both boundary-layer calculations and oil-flow visualisation tests. On comparison with unsteady data previously collected for the NACA 23012, several systematic methods of estimating the effects of trailing-edge separation on the dynamic stall process are presented. During oscillatory tests the NACA 23012(A) displayed a more stable damping characteristic which was attributed to the enhanced trailing-edge separation producing an earlier pitching-moment break. Based on the analysis of pressure-time histories obtained during ramp tests, it was deduced that a consequence of significant trailing-edge separation was to delay the initiation of the dynamic stall vortex. Detailed analysis of hot-film data led to the conclusion that aerofoils which display a tendency to stall in steady conditions, via separation growth from the trailing-edge, will experience vortex initiation by the breakdown of a thin layer of reversed flow travelling upstream beneath a stable shear layer which remains in close proximity to the aerofoil's surface contour."],"dc:format":["pdf"],"dc:identifier.uri":["https://theses.gla.ac.uk/5380/1/1988NivenPhd.pdf"],"dc:language":["en"],"dc:publisher.institution":["University of Glasgow"],"dc:relation.isreferencedby":["https://theses.gla.ac.uk/5380/"],"dc:relation.isreferencedby.uri":["https://gla.on.worldcat.org/oclc/309028604"],"dc:subject":["TL Motor vehicles. Aeronautics. Astronautics"],"dcterms:accessrights":["public"],"dc:title":["An experimental investigation into the influence of trailing-edge separation on an aerofoil's dynamic stall performance"],"dc:type":["Thesis"],"dc:type.qualificationlevel":["PhD"]},"updated_at":"2026-11-19T08:23:40Z"}