{"id":{"repo_id":"glasgow","oai_identifier":"oai:theses.gla.ac.uk:74009"},"canonical_url":"https://search.ndltd.org/etd/glasgow/oai:theses.gla.ac.uk:74009","repository":{"repo_id":"glasgow","name":"University of Glasgow","base_url":"https://theses.gla.ac.uk/cgi/oai2"},"display":{"title":"InAlGaAs-InP laterally coupled DBR and DFB lasers for microwave generation","abstract":"The work reported in this thesis is concerned with the fabrication and characterisation of laterally coupled (LC) distributed feedback (DFB) lasers, both single-and dual-mode, based on InAlGaAs-InP material emitting at 1.35 mum. The aim of the research is to realise a compact device, able to emit two wavelengths simultaneously, to be used for the generation of gigahertz (GHZ) and terahertz (THz) signals by photo-mixing. The motivation comes from the need for portable sources of radiation in the so-called THz region. The first part of the work involved the implementation of a laterally coupled grating that is intended to become a building block for the dual-wavelength device. To prove the effectiveness of the grating structure, single-mode DFBs and distributed Bragg reflector (DBH) lasers were designed and fabricated in the InAlGaAs-InP material, aiming to optimise the necessary technological processing. Assessment of these devices showed excellent performance: stable single-mode emission, with low threshold currents of about 55 mA and high sidemode suppression ratio (SMSR) over 40 dB, were demonstrated. Ridge-waveguide lasers (RWGL) were also fabricated alongside the single-mode devices, to allow comparison of the operating characteristics. The second part of the work was concerned with the implementation of a novel dual-wavelength laser, based on the lateral grating structure. The final device realised was a DFB laser having two different grating periods, one on each sidewall, fabricated in the InAlGaAs-InP material using the technology previously implemented. This source was thoroughly assessed in terms of lasing characteristics, mode behaviour, and suitability to generate microwave signals. Stable dual-mode operation, with low threshold currents around 50 mA and SMSR approaching 30 dB, was successfully demonstrated in continuous wave (CW) operating mode, at room temperature. The dual-mode behaviour was characterised by inspection of the modal transverse distribution and by injection locking experiments. Generation of microwave signals by photo-mixing was performed at about 23 GHz, and the linewidths of each of the individual modes and of the beat mode were measured as a function of the injection current. It was observed that, while the linewidth of the separate modes has a modest dependence on the injection level, the linewidth of the beat mode experiences a strong decrease as the injected current increases.","abstract_html":"The work reported in this thesis is concerned with the fabrication and characterisation of laterally coupled (LC) distributed feedback (DFB) lasers, both single-and dual-mode, based on InAlGaAs-InP material emitting at 1.35 mum. The aim of the research is to realise a compact device, able to emit two wavelengths simultaneously, to be used for the generation of gigahertz (GHZ) and terahertz (THz) signals by photo-mixing. The motivation comes from the need for portable sources of radiation in the so-called THz region. The first part of the work involved the implementation of a laterally coupled grating that is intended to become a building block for the dual-wavelength device. To prove the effectiveness of the grating structure, single-mode DFBs and distributed Bragg reflector (DBH) lasers were designed and fabricated in the InAlGaAs-InP material, aiming to optimise the necessary technological processing. Assessment of these devices showed excellent performance: stable single-mode emission, with low threshold currents of about 55 mA and high sidemode suppression ratio (SMSR) over 40 dB, were demonstrated. Ridge-waveguide lasers (RWGL) were also fabricated alongside the single-mode devices, to allow comparison of the operating characteristics. The second part of the work was concerned with the implementation of a novel dual-wavelength laser, based on the lateral grating structure. The final device realised was a DFB laser having two different grating periods, one on each sidewall, fabricated in the InAlGaAs-InP material using the technology previously implemented. This source was thoroughly assessed in terms of lasing characteristics, mode behaviour, and suitability to generate microwave signals. Stable dual-mode operation, with low threshold currents around 50 mA and SMSR approaching 30 dB, was successfully demonstrated in continuous wave (CW) operating mode, at room temperature. The dual-mode behaviour was characterised by inspection of the modal transverse distribution and by injection locking experiments. Generation of microwave signals by photo-mixing was performed at about 23 GHz, and the linewidths of each of the individual modes and of the beat mode were measured as a function of the injection current. It was observed that, while the linewidth of the separate modes has a modest dependence on the injection level, the linewidth of the beat mode experiences a strong decrease as the injected current increases.","abstract_has_math":false,"creators":["Pozzi, Francesca"],"institution":"University of Glasgow","degree_name":null,"degree_level":"PhD","degree_discipline":null,"degree_department":null,"school":null,"contributors":[],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2007,"date_issued":"2007","date_published":"2007","updated_at":"2026-11-19T08:29:16Z","subjects":[],"languages":["en"],"rights":[],"rights_urls":[],"identifier_entries":[],"person_identifier_entries":[]},"links":{"outbound_url":null,"outbound_label":null,"outbound_source":null,"record_url":null,"record_label":null,"record_kind":null,"record_source":null,"download_url":"https://theses.gla.ac.uk/74009/1/10753869.pdf","download_label":"Download PDF","download_source":"dc:identifier.uri","access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://theses.gla.ac.uk/cgi/oai2?verb=GetRecord&metadataPrefix=uketd_dc&identifier=oai%3Atheses.gla.ac.uk%3A74009","prefix":"uketd_dc"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:creator","label":"Author","values":["Pozzi, Francesca"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2007"]},{"key":"dc:date.issued","label":"Date","values":["2007"]},{"key":"dc:publisher.commercial","label":"Dc Publisher Commercial","values":["ProQuest Dissertations & Theses,"]},{"key":"dc:publisher.department","label":"Dc Publisher Department","values":["Department of Electronics and Electrical Engineering."]},{"key":"dc:publisher.institution","label":"Dc Publisher Institution","values":["University of Glasgow"]},{"key":"dc:relation.isreferencedby","label":"Dc Relation Isreferencedby","values":["https://theses.gla.ac.uk/74009/"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"dc:type.qualificationlevel","label":"Dc Type Qualificationlevel","values":["PhD"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language","label":"Dc Language","values":["en"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["https://theses.gla.ac.uk/74009/1/10753869.pdf"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["The work reported in this thesis is concerned with the fabrication and characterisation of laterally coupled (LC) distributed feedback (DFB) lasers, both single-and dual-mode, based on InAlGaAs-InP material emitting at 1.35 mum. The aim of the research is to realise a compact device, able to emit two wavelengths simultaneously, to be used for the generation of gigahertz (GHZ) and terahertz (THz) signals by photo-mixing. The motivation comes from the need for portable sources of radiation in the so-called THz region. The first part of the work involved the implementation of a laterally coupled grating that is intended to become a building block for the dual-wavelength device. To prove the effectiveness of the grating structure, single-mode DFBs and distributed Bragg reflector (DBH) lasers were designed and fabricated in the InAlGaAs-InP material, aiming to optimise the necessary technological processing. Assessment of these devices showed excellent performance: stable single-mode emission, with low threshold currents of about 55 mA and high sidemode suppression ratio (SMSR) over 40 dB, were demonstrated. Ridge-waveguide lasers (RWGL) were also fabricated alongside the single-mode devices, to allow comparison of the operating characteristics. The second part of the work was concerned with the implementation of a novel dual-wavelength laser, based on the lateral grating structure. The final device realised was a DFB laser having two different grating periods, one on each sidewall, fabricated in the InAlGaAs-InP material using the technology previously implemented. This source was thoroughly assessed in terms of lasing characteristics, mode behaviour, and suitability to generate microwave signals. Stable dual-mode operation, with low threshold currents around 50 mA and SMSR approaching 30 dB, was successfully demonstrated in continuous wave (CW) operating mode, at room temperature. The dual-mode behaviour was characterised by inspection of the modal transverse distribution and by injection locking experiments. Generation of microwave signals by photo-mixing was performed at about 23 GHz, and the linewidths of each of the individual modes and of the beat mode were measured as a function of the injection current. It was observed that, while the linewidth of the separate modes has a modest dependence on the injection level, the linewidth of the beat mode experiences a strong decrease as the injected current increases."]},{"key":"dc:format","label":"Dc Format","values":["application/pdf"]},{"key":"dcterms:accessrights","label":"Dcterms Accessrights","values":["public"]},{"key":"dc:title","label":"Title","values":["InAlGaAs-InP laterally coupled DBR and DFB lasers for microwave generation"]}]}],"canonical_facts":{"dc:creator":["Pozzi, Francesca"],"dc:date":["2007"],"dc:date.issued":["2007"],"dc:description.abstract":["The work reported in this thesis is concerned with the fabrication and characterisation of laterally coupled (LC) distributed feedback (DFB) lasers, both single-and dual-mode, based on InAlGaAs-InP material emitting at 1.35 mum. The aim of the research is to realise a compact device, able to emit two wavelengths simultaneously, to be used for the generation of gigahertz (GHZ) and terahertz (THz) signals by photo-mixing. The motivation comes from the need for portable sources of radiation in the so-called THz region. The first part of the work involved the implementation of a laterally coupled grating that is intended to become a building block for the dual-wavelength device. To prove the effectiveness of the grating structure, single-mode DFBs and distributed Bragg reflector (DBH) lasers were designed and fabricated in the InAlGaAs-InP material, aiming to optimise the necessary technological processing. Assessment of these devices showed excellent performance: stable single-mode emission, with low threshold currents of about 55 mA and high sidemode suppression ratio (SMSR) over 40 dB, were demonstrated. Ridge-waveguide lasers (RWGL) were also fabricated alongside the single-mode devices, to allow comparison of the operating characteristics. The second part of the work was concerned with the implementation of a novel dual-wavelength laser, based on the lateral grating structure. The final device realised was a DFB laser having two different grating periods, one on each sidewall, fabricated in the InAlGaAs-InP material using the technology previously implemented. This source was thoroughly assessed in terms of lasing characteristics, mode behaviour, and suitability to generate microwave signals. Stable dual-mode operation, with low threshold currents around 50 mA and SMSR approaching 30 dB, was successfully demonstrated in continuous wave (CW) operating mode, at room temperature. The dual-mode behaviour was characterised by inspection of the modal transverse distribution and by injection locking experiments. Generation of microwave signals by photo-mixing was performed at about 23 GHz, and the linewidths of each of the individual modes and of the beat mode were measured as a function of the injection current. It was observed that, while the linewidth of the separate modes has a modest dependence on the injection level, the linewidth of the beat mode experiences a strong decrease as the injected current increases."],"dc:format":["application/pdf"],"dc:identifier.uri":["https://theses.gla.ac.uk/74009/1/10753869.pdf"],"dc:language":["en"],"dc:publisher.commercial":["ProQuest Dissertations & Theses,"],"dc:publisher.department":["Department of Electronics and Electrical Engineering."],"dc:publisher.institution":["University of Glasgow"],"dc:relation.isreferencedby":["https://theses.gla.ac.uk/74009/"],"dcterms:accessrights":["public"],"dc:title":["InAlGaAs-InP laterally coupled DBR and DFB lasers for microwave generation"],"dc:type":["Thesis"],"dc:type.qualificationlevel":["PhD"]},"updated_at":"2026-11-19T08:29:16Z"}