{"id":{"repo_id":"glasgow","oai_identifier":"oai:theses.gla.ac.uk:75965"},"canonical_url":"https://search.ndltd.org/etd/glasgow/oai:theses.gla.ac.uk:75965","repository":{"repo_id":"glasgow","name":"University of Glasgow","base_url":"https://theses.gla.ac.uk/cgi/oai2"},"display":{"title":"Selective Hydrogenation of a Multifunctional Compound: 2-Butyne-1,4-Diol to Cis-2-Butene-1,4-Diol","abstract":"A 1% Pd/C catalyst supplied by ICI Synetix has been characterised, and used for the selective hydrogenation of 2-butyne-1,4-diol. The reaction procedure was developed for both an ambient and an elevated pressure reaction vessel, the hydrogenation of 2-butyne-1,4-diol was bench-marked with the 1% Pd/C catalyst. Two 1% Pd/Al2O3 catalysts have been prepared, characterised and used for the hydrogenation of 2-butyne-1,4-diol also. AH three of the 1% supported palladium catalysts have been characterised with CO chemisorption, electron microscopy and BET surface area determination. When the two 1% Pd/Al2O3 catalysts were employed for the selective hydrogenation of 2-butyne-1,4-diol, not only did they exhibit a different rate of hydrogenation of 2-butyne-1,4-diol, but also different final product distributions, with the selectivities towards formation of cis-2-butene-1,4-diol being of the same order (circa 95%) as that achieved when the 1% Pd/C catalyst was employed. An unexpected compound for this type of catalytic hydrogenation called iso- pro poxytetrahydroftiran was formed in all the reactions that employed the 1% supported palladium catalysts. Its formation occurred because of a solvent/bound surface species interaction, in a concerted ring closure process. Iso-propoxytetrahydrofuran has been isolated, purified, characterised with NMR and GC-MS and calibrated for GC analysis. No iso-propoxytetrahydrofuran was formed when a 9.1% Cu/SiO2 catalyst was employed for the selective hydrogenation of 2-butyne-1,4-diol. The 9.1% Cu/SiO2 catalyst offered the advantage of a higher selectivity towards 2- butene-1,4-diol formation than any of the supported 1% palladium catalysts (circa 97%), but at a far slower rate of hydrogenation. By changing the reaction solvent it was possible to produce different furans, and also have an impact of the rate of hydrogenation of 2-butyne-1,4-diol, the rate of hydrogenation in distilled water was around half of that observed when propan-2-ol was employed as the reaction solvent. With distilled water as the reaction solvent, hydroxy-tetrahydrofiiran was produced during the course of the reaction, with w-butanol as the reaction solvent, butoxy-tetrahydrofuran was produced during the course of the reaction. A series of experiments employing mono-substituted alkynes was conducted to try and elucidate the reaction mechanism for the selective hydrogenation of 2-butyne-1,4-diol. It was found from these experiments that a diol functionality was required on the reagent species for the formation of iso-propoxytetrahydrofiiran to occur. Targeted isotope switching experiments, in combination with 1H and 2D NMR spectroscopy and GC-MS were conducted so that all the experimental observations made during the course of the study could be consolidated into one postulated reaction mechanism.","abstract_html":"A 1% Pd/C catalyst supplied by ICI Synetix has been characterised, and used for the selective hydrogenation of 2-butyne-1,4-diol. The reaction procedure was developed for both an ambient and an elevated pressure reaction vessel, the hydrogenation of 2-butyne-1,4-diol was bench-marked with the 1% Pd/C catalyst. Two 1% Pd/Al2O3 catalysts have been prepared, characterised and used for the hydrogenation of 2-butyne-1,4-diol also. AH three of the 1% supported palladium catalysts have been characterised with CO chemisorption, electron microscopy and BET surface area determination. When the two 1% Pd/Al2O3 catalysts were employed for the selective hydrogenation of 2-butyne-1,4-diol, not only did they exhibit a different rate of hydrogenation of 2-butyne-1,4-diol, but also different final product distributions, with the selectivities towards formation of cis-2-butene-1,4-diol being of the same order (circa 95%) as that achieved when the 1% Pd/C catalyst was employed. An unexpected compound for this type of catalytic hydrogenation called iso- pro poxytetrahydroftiran was formed in all the reactions that employed the 1% supported palladium catalysts. Its formation occurred because of a solvent/bound surface species interaction, in a concerted ring closure process. Iso-propoxytetrahydrofuran has been isolated, purified, characterised with NMR and GC-MS and calibrated for GC analysis. No iso-propoxytetrahydrofuran was formed when a 9.1% Cu/SiO2 catalyst was employed for the selective hydrogenation of 2-butyne-1,4-diol. The 9.1% Cu/SiO2 catalyst offered the advantage of a higher selectivity towards 2- butene-1,4-diol formation than any of the supported 1% palladium catalysts (circa 97%), but at a far slower rate of hydrogenation. By changing the reaction solvent it was possible to produce different furans, and also have an impact of the rate of hydrogenation of 2-butyne-1,4-diol, the rate of hydrogenation in distilled water was around half of that observed when propan-2-ol was employed as the reaction solvent. With distilled water as the reaction solvent, hydroxy-tetrahydrofiiran was produced during the course of the reaction, with w-butanol as the reaction solvent, butoxy-tetrahydrofuran was produced during the course of the reaction. A series of experiments employing mono-substituted alkynes was conducted to try and elucidate the reaction mechanism for the selective hydrogenation of 2-butyne-1,4-diol. It was found from these experiments that a diol functionality was required on the reagent species for the formation of iso-propoxytetrahydrofiiran to occur. Targeted isotope switching experiments, in combination with 1H and 2D NMR spectroscopy and GC-MS were conducted so that all the experimental observations made during the course of the study could be consolidated into one postulated reaction mechanism.","abstract_has_math":false,"creators":["Cullen, Bernard"],"institution":"University of Glasgow","degree_name":null,"degree_level":"PhD","degree_discipline":null,"degree_department":null,"school":null,"contributors":[],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2001,"date_issued":"2001","date_published":"2001","updated_at":"2026-11-19T08:30:49Z","subjects":[],"languages":["en"],"rights":[],"rights_urls":[],"identifier_entries":[],"person_identifier_entries":[]},"links":{"outbound_url":null,"outbound_label":null,"outbound_source":null,"record_url":null,"record_label":null,"record_kind":null,"record_source":null,"download_url":"https://theses.gla.ac.uk/75965/1/13818741.pdf","download_label":"Download PDF","download_source":"dc:identifier.uri","access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://theses.gla.ac.uk/cgi/oai2?verb=GetRecord&metadataPrefix=uketd_dc&identifier=oai%3Atheses.gla.ac.uk%3A75965","prefix":"uketd_dc"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:creator","label":"Author","values":["Cullen, Bernard"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2001"]},{"key":"dc:date.issued","label":"Date","values":["2001"]},{"key":"dc:publisher.commercial","label":"Dc Publisher Commercial","values":["ProQuest Dissertations & Theses,"]},{"key":"dc:publisher.department","label":"Dc Publisher Department","values":["Department of Chemistry."]},{"key":"dc:publisher.institution","label":"Dc Publisher Institution","values":["University of Glasgow"]},{"key":"dc:relation.isreferencedby","label":"Dc Relation Isreferencedby","values":["https://theses.gla.ac.uk/75965/"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"dc:type.qualificationlevel","label":"Dc Type Qualificationlevel","values":["PhD"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language","label":"Dc Language","values":["en"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["https://theses.gla.ac.uk/75965/1/13818741.pdf"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["A 1% Pd/C catalyst supplied by ICI Synetix has been characterised, and used for the selective hydrogenation of 2-butyne-1,4-diol. The reaction procedure was developed for both an ambient and an elevated pressure reaction vessel, the hydrogenation of 2-butyne-1,4-diol was bench-marked with the 1% Pd/C catalyst. Two 1% Pd/Al2O3 catalysts have been prepared, characterised and used for the hydrogenation of 2-butyne-1,4-diol also. AH three of the 1% supported palladium catalysts have been characterised with CO chemisorption, electron microscopy and BET surface area determination. When the two 1% Pd/Al2O3 catalysts were employed for the selective hydrogenation of 2-butyne-1,4-diol, not only did they exhibit a different rate of hydrogenation of 2-butyne-1,4-diol, but also different final product distributions, with the selectivities towards formation of cis-2-butene-1,4-diol being of the same order (circa 95%) as that achieved when the 1% Pd/C catalyst was employed. An unexpected compound for this type of catalytic hydrogenation called iso- pro poxytetrahydroftiran was formed in all the reactions that employed the 1% supported palladium catalysts. Its formation occurred because of a solvent/bound surface species interaction, in a concerted ring closure process. Iso-propoxytetrahydrofuran has been isolated, purified, characterised with NMR and GC-MS and calibrated for GC analysis. No iso-propoxytetrahydrofuran was formed when a 9.1% Cu/SiO2 catalyst was employed for the selective hydrogenation of 2-butyne-1,4-diol. The 9.1% Cu/SiO2 catalyst offered the advantage of a higher selectivity towards 2- butene-1,4-diol formation than any of the supported 1% palladium catalysts (circa 97%), but at a far slower rate of hydrogenation. By changing the reaction solvent it was possible to produce different furans, and also have an impact of the rate of hydrogenation of 2-butyne-1,4-diol, the rate of hydrogenation in distilled water was around half of that observed when propan-2-ol was employed as the reaction solvent. With distilled water as the reaction solvent, hydroxy-tetrahydrofiiran was produced during the course of the reaction, with w-butanol as the reaction solvent, butoxy-tetrahydrofuran was produced during the course of the reaction. A series of experiments employing mono-substituted alkynes was conducted to try and elucidate the reaction mechanism for the selective hydrogenation of 2-butyne-1,4-diol. It was found from these experiments that a diol functionality was required on the reagent species for the formation of iso-propoxytetrahydrofiiran to occur. Targeted isotope switching experiments, in combination with 1H and 2D NMR spectroscopy and GC-MS were conducted so that all the experimental observations made during the course of the study could be consolidated into one postulated reaction mechanism."]},{"key":"dc:format","label":"Dc Format","values":["application/pdf"]},{"key":"dcterms:accessrights","label":"Dcterms Accessrights","values":["public"]},{"key":"dc:title","label":"Title","values":["Selective Hydrogenation of a Multifunctional Compound: 2-Butyne-1,4-Diol to Cis-2-Butene-1,4-Diol"]}]}],"canonical_facts":{"dc:creator":["Cullen, Bernard"],"dc:date":["2001"],"dc:date.issued":["2001"],"dc:description.abstract":["A 1% Pd/C catalyst supplied by ICI Synetix has been characterised, and used for the selective hydrogenation of 2-butyne-1,4-diol. The reaction procedure was developed for both an ambient and an elevated pressure reaction vessel, the hydrogenation of 2-butyne-1,4-diol was bench-marked with the 1% Pd/C catalyst. Two 1% Pd/Al2O3 catalysts have been prepared, characterised and used for the hydrogenation of 2-butyne-1,4-diol also. AH three of the 1% supported palladium catalysts have been characterised with CO chemisorption, electron microscopy and BET surface area determination. When the two 1% Pd/Al2O3 catalysts were employed for the selective hydrogenation of 2-butyne-1,4-diol, not only did they exhibit a different rate of hydrogenation of 2-butyne-1,4-diol, but also different final product distributions, with the selectivities towards formation of cis-2-butene-1,4-diol being of the same order (circa 95%) as that achieved when the 1% Pd/C catalyst was employed. An unexpected compound for this type of catalytic hydrogenation called iso- pro poxytetrahydroftiran was formed in all the reactions that employed the 1% supported palladium catalysts. Its formation occurred because of a solvent/bound surface species interaction, in a concerted ring closure process. Iso-propoxytetrahydrofuran has been isolated, purified, characterised with NMR and GC-MS and calibrated for GC analysis. No iso-propoxytetrahydrofuran was formed when a 9.1% Cu/SiO2 catalyst was employed for the selective hydrogenation of 2-butyne-1,4-diol. The 9.1% Cu/SiO2 catalyst offered the advantage of a higher selectivity towards 2- butene-1,4-diol formation than any of the supported 1% palladium catalysts (circa 97%), but at a far slower rate of hydrogenation. By changing the reaction solvent it was possible to produce different furans, and also have an impact of the rate of hydrogenation of 2-butyne-1,4-diol, the rate of hydrogenation in distilled water was around half of that observed when propan-2-ol was employed as the reaction solvent. With distilled water as the reaction solvent, hydroxy-tetrahydrofiiran was produced during the course of the reaction, with w-butanol as the reaction solvent, butoxy-tetrahydrofuran was produced during the course of the reaction. A series of experiments employing mono-substituted alkynes was conducted to try and elucidate the reaction mechanism for the selective hydrogenation of 2-butyne-1,4-diol. It was found from these experiments that a diol functionality was required on the reagent species for the formation of iso-propoxytetrahydrofiiran to occur. Targeted isotope switching experiments, in combination with 1H and 2D NMR spectroscopy and GC-MS were conducted so that all the experimental observations made during the course of the study could be consolidated into one postulated reaction mechanism."],"dc:format":["application/pdf"],"dc:identifier.uri":["https://theses.gla.ac.uk/75965/1/13818741.pdf"],"dc:language":["en"],"dc:publisher.commercial":["ProQuest Dissertations & Theses,"],"dc:publisher.department":["Department of Chemistry."],"dc:publisher.institution":["University of Glasgow"],"dc:relation.isreferencedby":["https://theses.gla.ac.uk/75965/"],"dcterms:accessrights":["public"],"dc:title":["Selective Hydrogenation of a Multifunctional Compound: 2-Butyne-1,4-Diol to Cis-2-Butene-1,4-Diol"],"dc:type":["Thesis"],"dc:type.qualificationlevel":["PhD"]},"updated_at":"2026-11-19T08:30:49Z"}