{"id":{"repo_id":"glasgow","oai_identifier":"oai:theses.gla.ac.uk:84683"},"canonical_url":"https://search.ndltd.org/etd/glasgow/oai:theses.gla.ac.uk:84683","repository":{"repo_id":"glasgow","name":"University of Glasgow","base_url":"https://theses.gla.ac.uk/cgi/oai2"},"display":{"title":"Fabrication and characterization of MoTe2 field effect transistor","abstract":"For nearly half a century, the scaling of silicon (Si) CMOS field-effect transistors (FETs) has driven advancements in microelectronics, as predicted by Moore’s Law. However, as device dimensions reach nanometre scales, the physical limitations of traditional materials have become evident. Two-dimensional (2D) materials, such as transition metal dichalcogenides (TMDCs), present a promising alternative for next-generation devices due to their unique properties, including flexibility and high carrier mobility. These materials are particularly well-suited for 'More than Moore' devices, which aim to enhance CMOS technology by introducing additional functionalities. This dissertation investigates the fabrication and characterisation of MoTe2-based FETs. First, a novel chemical vapour deposition (CVD) method for the selective growth of 2H- and 1T-MoTe2 using FeTe2 and Mo (or MoO3) precursors is presented. Second, a back-gate MoTe2 FET fabrication process is developed, integrating CVD with photolithography, which offers a scalable alternative to exfoliation techniques. The fabrication process utilises a double-layer photolithography method, employing an auxiliary water-soluble resist (SPR92) to protect MoTe2 from damage. Finally, the electrical performance of the MoTe2 FETs is evaluated, comparing Pd/Au and Ti/Au contact metals. Pd/Au contacts exhibit lower contact resistance (~0.79 MΩ·μm) and form ohmic contacts, while Ti/Au shows higher resistance (~2.06 MΩ·μm) due to a larger Schottky barrier. Both devices demonstrate p-type operation with a mobility of ~2.5 cm²/V·s, though Pd/Au contacts deliver superior performance, including a higher Ion/off ratio (104 ), lower sub-threshold swing (1V/dec), and a threshold voltage of -45 V. These findings suggest that further optimisation of contact metals could improve the performance of p-type MoTe2 FETs for future applications.","abstract_html":"For nearly half a century, the scaling of silicon (Si) CMOS field-effect transistors (FETs) has driven advancements in microelectronics, as predicted by Moore’s Law. However, as device dimensions reach nanometre scales, the physical limitations of traditional materials have become evident. Two-dimensional (2D) materials, such as transition metal dichalcogenides (TMDCs), present a promising alternative for next-generation devices due to their unique properties, including flexibility and high carrier mobility. These materials are particularly well-suited for &#x27;More than Moore&#x27; devices, which aim to enhance CMOS technology by introducing additional functionalities. This dissertation investigates the fabrication and characterisation of MoTe2-based FETs. First, a novel chemical vapour deposition (CVD) method for the selective growth of 2H- and 1T-MoTe2 using FeTe2 and Mo (or MoO3) precursors is presented. Second, a back-gate MoTe2 FET fabrication process is developed, integrating CVD with photolithography, which offers a scalable alternative to exfoliation techniques. The fabrication process utilises a double-layer photolithography method, employing an auxiliary water-soluble resist (SPR92) to protect MoTe2 from damage. Finally, the electrical performance of the MoTe2 FETs is evaluated, comparing Pd/Au and Ti/Au contact metals. Pd/Au contacts exhibit lower contact resistance (~0.79 MΩ·μm) and form ohmic contacts, while Ti/Au shows higher resistance (~2.06 MΩ·μm) due to a larger Schottky barrier. Both devices demonstrate p-type operation with a mobility of ~2.5 cm²/V·s, though Pd/Au contacts deliver superior performance, including a higher Ion/off ratio (104 ), lower sub-threshold swing (1V/dec), and a threshold voltage of -45 V. These findings suggest that further optimisation of contact metals could improve the performance of p-type MoTe2 FETs for future applications.","abstract_has_math":false,"creators":["Zhang, Jingyi"],"institution":"University of Glasgow","degree_name":null,"degree_level":"PhD","degree_discipline":null,"degree_department":null,"school":null,"contributors":[],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2024,"date_issued":"2024","date_published":"2024","updated_at":"2026-11-19T08:36:50Z","subjects":["TA Engineering (General). Civil engineering (General)","TK Electrical engineering. Electronics Nuclear engineering"],"languages":["en"],"rights":[],"rights_urls":[],"identifier_entries":[],"person_identifier_entries":[]},"links":{"outbound_url":"https://doi.org/10.5525/gla.thesis.84683","outbound_label":"DOI","outbound_source":"dc:identifier.doi","record_url":"https://doi.org/10.5525/gla.thesis.84683","record_label":"Repository record","record_kind":"doi","record_source":"dc:identifier.doi","download_url":"https://theses.gla.ac.uk/84683/2/2024ZhangPhD.pdf","download_label":"Download PDF","download_source":"dc:identifier.uri","access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://theses.gla.ac.uk/cgi/oai2?verb=GetRecord&metadataPrefix=uketd_dc&identifier=oai%3Atheses.gla.ac.uk%3A84683","prefix":"uketd_dc"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:creator","label":"Author","values":["Zhang, Jingyi"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2024"]},{"key":"dc:date.issued","label":"Date","values":["2024"]},{"key":"dc:publisher.institution","label":"Dc Publisher Institution","values":["University of Glasgow"]},{"key":"dc:relation.isreferencedby","label":"Dc Relation Isreferencedby","values":["https://theses.gla.ac.uk/84683/"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"dc:type.qualificationlevel","label":"Dc Type Qualificationlevel","values":["PhD"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["TA Engineering (General). Civil engineering (General)","TK Electrical engineering. Electronics Nuclear engineering"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language","label":"Dc Language","values":["en"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.doi","label":"DOI","values":["10.5525/gla.thesis.84683"]},{"key":"dc:identifier.uri","label":"Identifier URI","values":["https://theses.gla.ac.uk/84683/2/2024ZhangPhD.pdf"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["For nearly half a century, the scaling of silicon (Si) CMOS field-effect transistors (FETs) has driven advancements in microelectronics, as predicted by Moore’s Law. However, as device dimensions reach nanometre scales, the physical limitations of traditional materials have become evident. Two-dimensional (2D) materials, such as transition metal dichalcogenides (TMDCs), present a promising alternative for next-generation devices due to their unique properties, including flexibility and high carrier mobility. These materials are particularly well-suited for 'More than Moore' devices, which aim to enhance CMOS technology by introducing additional functionalities. This dissertation investigates the fabrication and characterisation of MoTe2-based FETs. First, a novel chemical vapour deposition (CVD) method for the selective growth of 2H- and 1T-MoTe2 using FeTe2 and Mo (or MoO3) precursors is presented. Second, a back-gate MoTe2 FET fabrication process is developed, integrating CVD with photolithography, which offers a scalable alternative to exfoliation techniques. The fabrication process utilises a double-layer photolithography method, employing an auxiliary water-soluble resist (SPR92) to protect MoTe2 from damage. Finally, the electrical performance of the MoTe2 FETs is evaluated, comparing Pd/Au and Ti/Au contact metals. Pd/Au contacts exhibit lower contact resistance (~0.79 MΩ·μm) and form ohmic contacts, while Ti/Au shows higher resistance (~2.06 MΩ·μm) due to a larger Schottky barrier. Both devices demonstrate p-type operation with a mobility of ~2.5 cm²/V·s, though Pd/Au contacts deliver superior performance, including a higher Ion/off ratio (104 ), lower sub-threshold swing (1V/dec), and a threshold voltage of -45 V. These findings suggest that further optimisation of contact metals could improve the performance of p-type MoTe2 FETs for future applications."]},{"key":"dc:format","label":"Dc Format","values":["pdf"]},{"key":"dcterms:accessrights","label":"Dcterms Accessrights","values":["public"]},{"key":"dc:title","label":"Title","values":["Fabrication and characterization of MoTe2 field effect transistor"]}]}],"canonical_facts":{"dc:creator":["Zhang, Jingyi"],"dc:date":["2024"],"dc:date.issued":["2024"],"dc:description.abstract":["For nearly half a century, the scaling of silicon (Si) CMOS field-effect transistors (FETs) has driven advancements in microelectronics, as predicted by Moore’s Law. However, as device dimensions reach nanometre scales, the physical limitations of traditional materials have become evident. Two-dimensional (2D) materials, such as transition metal dichalcogenides (TMDCs), present a promising alternative for next-generation devices due to their unique properties, including flexibility and high carrier mobility. These materials are particularly well-suited for 'More than Moore' devices, which aim to enhance CMOS technology by introducing additional functionalities. This dissertation investigates the fabrication and characterisation of MoTe2-based FETs. First, a novel chemical vapour deposition (CVD) method for the selective growth of 2H- and 1T-MoTe2 using FeTe2 and Mo (or MoO3) precursors is presented. Second, a back-gate MoTe2 FET fabrication process is developed, integrating CVD with photolithography, which offers a scalable alternative to exfoliation techniques. The fabrication process utilises a double-layer photolithography method, employing an auxiliary water-soluble resist (SPR92) to protect MoTe2 from damage. Finally, the electrical performance of the MoTe2 FETs is evaluated, comparing Pd/Au and Ti/Au contact metals. Pd/Au contacts exhibit lower contact resistance (~0.79 MΩ·μm) and form ohmic contacts, while Ti/Au shows higher resistance (~2.06 MΩ·μm) due to a larger Schottky barrier. Both devices demonstrate p-type operation with a mobility of ~2.5 cm²/V·s, though Pd/Au contacts deliver superior performance, including a higher Ion/off ratio (104 ), lower sub-threshold swing (1V/dec), and a threshold voltage of -45 V. These findings suggest that further optimisation of contact metals could improve the performance of p-type MoTe2 FETs for future applications."],"dc:format":["pdf"],"dc:identifier.doi":["10.5525/gla.thesis.84683"],"dc:identifier.uri":["https://theses.gla.ac.uk/84683/2/2024ZhangPhD.pdf"],"dc:language":["en"],"dc:publisher.institution":["University of Glasgow"],"dc:relation.isreferencedby":["https://theses.gla.ac.uk/84683/"],"dc:subject":["TA Engineering (General). Civil engineering (General)","TK Electrical engineering. Electronics Nuclear engineering"],"dcterms:accessrights":["public"],"dc:title":["Fabrication and characterization of MoTe2 field effect transistor"],"dc:type":["Thesis"],"dc:type.qualificationlevel":["PhD"]},"updated_at":"2026-11-19T08:36:50Z"}