{"id":{"repo_id":"mcmaster","oai_identifier":"oai:macsphere.mcmaster.ca:11375/25852"},"canonical_url":"https://search.ndltd.org/etd/mcmaster/oai:macsphere.mcmaster.ca:11375/25852","repository":{"repo_id":"mcmaster","name":"McMaster University","base_url":"https://macsphere.mcmaster.ca/server/oai/request"},"display":{"title":"Improving Calcium Carbonate Based Porous Media for Lateral Flow Assays","abstract":"Nitrocellulose is currently the most common porous material used in commercially available lateral flow assays. It is, however, unsafe to manufacture and time consuming to incorporate into multi-component assay devices. Precipitated calcium carbonate is a material produced from naturally occurring lime that can be suspended in a binder and extruded onto a surface. This extruded suspension forms a porous coating through which a solution can be wicked. The physical characteristics of three different types of calcium carbonate types were investigated to determine differences that may yield better lateral flow. The capillary flow rate through the coating was found to be largely affected by the calcium carbonate type used, the binder concentration and whether any post-printing treatment was applied, specifically heating the print. Calcium carbonate has a high specific surface area, which results in a high protein binding capacity. To prevent protein binding, pre-treating calcium carbonate particles prior to forming the suspension in a binder was attempted. Pre-treatment with bovine serum albumin, casein or methoxy-PEG phosphate did not show prevention of protein binding. Furthermore, by treating the calcium carbonate particles with a protein before suspension formulation, the wicking rate after printing was found to be diminished.","abstract_html":"Nitrocellulose is currently the most common porous material used in commercially available lateral flow assays. It is, however, unsafe to manufacture and time consuming to incorporate into multi-component assay devices. Precipitated calcium carbonate is a material produced from naturally occurring lime that can be suspended in a binder and extruded onto a surface. This extruded suspension forms a porous coating through which a solution can be wicked. The physical characteristics of three different types of calcium carbonate types were investigated to determine differences that may yield better lateral flow. The capillary flow rate through the coating was found to be largely affected by the calcium carbonate type used, the binder concentration and whether any post-printing treatment was applied, specifically heating the print. Calcium carbonate has a high specific surface area, which results in a high protein binding capacity. To prevent protein binding, pre-treating calcium carbonate particles prior to forming the suspension in a binder was attempted. Pre-treatment with bovine serum albumin, casein or methoxy-PEG phosphate did not show prevention of protein binding. Furthermore, by treating the calcium carbonate particles with a protein before suspension formulation, the wicking rate after printing was found to be diminished.","abstract_has_math":false,"creators":["Szewczyk, Alexandra"],"institution":null,"degree_name":null,"degree_level":null,"degree_discipline":null,"degree_department":"Chemical Engineering","school":null,"contributors":[],"advisors":["Pelton, Robert","Filipe, Carlos"],"committee_chairs":[],"committee_members":[],"year":2020,"date_issued":"2020","date_published":"2020","updated_at":"2026-11-18T19:30:54Z","subjects":["Calcium Carbonate","Lateral Flow Assays","Porous Media","Printable Materials"],"languages":["en"],"rights":[],"rights_urls":[],"identifier_entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["https://doi.org/10.71548/8714"],"render_values":[{"text":"https://doi.org/10.71548/8714","href":"https://doi.org/10.71548/8714","code":true}]}],"person_identifier_entries":[]},"links":{"outbound_url":"http://hdl.handle.net/11375/25852","outbound_label":"Handle","outbound_source":"dc:identifier.uri","record_url":"http://hdl.handle.net/11375/25852","record_label":"Repository record","record_kind":"handle","record_source":"dc:identifier.uri","download_url":null,"download_label":null,"download_source":null,"access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://macsphere.mcmaster.ca/server/oai/request?verb=GetRecord&metadataPrefix=dim&identifier=oai%3Amacsphere.mcmaster.ca%3A11375%2F25852","prefix":"dim"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.advisor","label":"Advisor","values":["Pelton, Robert","Filipe, Carlos"]},{"key":"dc:contributor.department","label":"Department","values":["Chemical Engineering"]},{"key":"dc:creator","label":"Author","values":["Szewczyk, Alexandra"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.accessioned","label":"Dc Date Accessioned","values":["2020-10-05T15:15:41Z"]},{"key":"dc:date.available","label":"Dc Date Available","values":["2020-10-05T15:15:41Z"]},{"key":"dc:date.issued","label":"Date","values":["2020"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["Calcium Carbonate","Lateral Flow Assays","Porous Media","Printable Materials"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.iso","label":"Language (ISO)","values":["en"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://hdl.handle.net/11375/25852","https://doi.org/10.71548/8714"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["Nitrocellulose is currently the most common porous material used in commercially available lateral flow assays. It is, however, unsafe to manufacture and time consuming to incorporate into multi-component assay devices. Precipitated calcium carbonate is a material produced from naturally occurring lime that can be suspended in a binder and extruded onto a surface. This extruded suspension forms a porous coating through which a solution can be wicked. The physical characteristics of three different types of calcium carbonate types were investigated to determine differences that may yield better lateral flow. The capillary flow rate through the coating was found to be largely affected by the calcium carbonate type used, the binder concentration and whether any post-printing treatment was applied, specifically heating the print. Calcium carbonate has a high specific surface area, which results in a high protein binding capacity. To prevent protein binding, pre-treating calcium carbonate particles prior to forming the suspension in a binder was attempted. Pre-treatment with bovine serum albumin, casein or methoxy-PEG phosphate did not show prevention of protein binding. Furthermore, by treating the calcium carbonate particles with a protein before suspension formulation, the wicking rate after printing was found to be diminished."]},{"key":"dc:description.degree","label":"Dc Description Degree","values":["Master of Applied Science (MASc)"]},{"key":"dc:title","label":"Title","values":["Improving Calcium Carbonate Based Porous Media for Lateral Flow Assays"]},{"key":"dc:title.alternative","label":"Alternative Title","values":["CALCIUM CARBONATE BASED POROUS MEDIA"]},{"key":"others:access_status","label":"Others Access Status","values":["open.access"]}]}],"canonical_facts":{"dc:contributor.advisor":["Pelton, Robert","Filipe, Carlos"],"dc:contributor.department":["Chemical Engineering"],"dc:creator":["Szewczyk, Alexandra"],"dc:date.accessioned":["2020-10-05T15:15:41Z"],"dc:date.available":["2020-10-05T15:15:41Z"],"dc:date.issued":["2020"],"dc:description.abstract":["Nitrocellulose is currently the most common porous material used in commercially available lateral flow assays. It is, however, unsafe to manufacture and time consuming to incorporate into multi-component assay devices. Precipitated calcium carbonate is a material produced from naturally occurring lime that can be suspended in a binder and extruded onto a surface. This extruded suspension forms a porous coating through which a solution can be wicked. The physical characteristics of three different types of calcium carbonate types were investigated to determine differences that may yield better lateral flow. The capillary flow rate through the coating was found to be largely affected by the calcium carbonate type used, the binder concentration and whether any post-printing treatment was applied, specifically heating the print. Calcium carbonate has a high specific surface area, which results in a high protein binding capacity. To prevent protein binding, pre-treating calcium carbonate particles prior to forming the suspension in a binder was attempted. Pre-treatment with bovine serum albumin, casein or methoxy-PEG phosphate did not show prevention of protein binding. Furthermore, by treating the calcium carbonate particles with a protein before suspension formulation, the wicking rate after printing was found to be diminished."],"dc:description.degree":["Master of Applied Science (MASc)"],"dc:identifier.uri":["http://hdl.handle.net/11375/25852","https://doi.org/10.71548/8714"],"dc:language.iso":["en"],"dc:subject":["Calcium Carbonate","Lateral Flow Assays","Porous Media","Printable Materials"],"dc:title":["Improving Calcium Carbonate Based Porous Media for Lateral Flow Assays"],"dc:title.alternative":["CALCIUM CARBONATE BASED POROUS MEDIA"],"dc:type":["Thesis"],"others:access_status":["open.access"]},"updated_at":"2026-11-18T19:30:54Z"}