{"id":{"repo_id":"mcmaster","oai_identifier":"oai:macsphere.mcmaster.ca:11375/29956"},"canonical_url":"https://search.ndltd.org/etd/mcmaster/oai:macsphere.mcmaster.ca:11375/29956","repository":{"repo_id":"mcmaster","name":"McMaster University","base_url":"https://macsphere.mcmaster.ca/server/oai/request"},"display":{"title":"Nucleic acid-based recognition events in hydrogel array systems","abstract":"Nucleic acids play an important role in the construction of novel biosensing units. Integrating nucleicacid- diagnostic tools with polymeric assemblies can enhance selectivity and sensitivity and protect them from nuclease digestion. In this thesis, DNA-based sensing molecules are incorporated into hydrogel films based on poly(oligoethylene glycol methacrylate) (POEGMA) to fabricate printable DNA hybridization and DNA aptamer microarrays to detect small molecules. Firstly, a printable hydrogel microarray incorporating long-chain-sensing DNA generated via a rolling circle amplification reaction was developed to exploit the benefits of isothermal nucleic acid amplification technology and the non-covalent immobilization potential of POEGMA-hydrogel films on a nitrocellulose substrate. Fluorophore-labelled nucleic acid analytes of varying sizes were spotted on hydrogel-trapped RCA sensing units and assessed on their ability to detect specific DNA hybridization events. Compared to hydrogel-free sensors, the developed sensors provided greater detection potential for small oligonucleotides while also enabling uniform spot-to-spot fluorescence signal distribution from the sensing analytes. The hydrogel’s ability to increase base-pairing affinity in short DNA duplexes was further investigated using fluorescence resonance energy transfer (FRET)-based structure-switching aptamers that bind adenosine triphosphate (ATP). Moderate thermal stabilization was observed in the hydrogel matrices embedding FRET-based structure-switching aptamer constructs (SSAC) assembled with quencher stems having lengths of ≤ 10-bp. The combination of a water-swollen/flexible matrix and the thermal stabilization capabilities of the POEGMA polymeric matrix endowed the hydrogel-immobilized aptamer reporters with greater sensitivity compared to hydrogel-free systems. The developed hydrogel-based aptamer sensor was then translated into a printable nitrocellulosesupported microarray format, with additional modulation of the SSAC configuration. DNA microarrays with even greater sensitivity were produced by rationally positioning and further shortening the quencher-stems to 7-bp using the optimized assay conditions. In addition to effective immobilization and ligand-binding affinity comparable to the native aptamer, the hydrogel interface provided protection against nucleases and supported applications using real biological samples (i.e., in human serum).","abstract_html":"Nucleic acids play an important role in the construction of novel biosensing units. Integrating nucleicacid- diagnostic tools with polymeric assemblies can enhance selectivity and sensitivity and protect them from nuclease digestion. In this thesis, DNA-based sensing molecules are incorporated into hydrogel films based on poly(oligoethylene glycol methacrylate) (POEGMA) to fabricate printable DNA hybridization and DNA aptamer microarrays to detect small molecules. Firstly, a printable hydrogel microarray incorporating long-chain-sensing DNA generated via a rolling circle amplification reaction was developed to exploit the benefits of isothermal nucleic acid amplification technology and the non-covalent immobilization potential of POEGMA-hydrogel films on a nitrocellulose substrate. Fluorophore-labelled nucleic acid analytes of varying sizes were spotted on hydrogel-trapped RCA sensing units and assessed on their ability to detect specific DNA hybridization events. Compared to hydrogel-free sensors, the developed sensors provided greater detection potential for small oligonucleotides while also enabling uniform spot-to-spot fluorescence signal distribution from the sensing analytes. The hydrogel’s ability to increase base-pairing affinity in short DNA duplexes was further investigated using fluorescence resonance energy transfer (FRET)-based structure-switching aptamers that bind adenosine triphosphate (ATP). Moderate thermal stabilization was observed in the hydrogel matrices embedding FRET-based structure-switching aptamer constructs (SSAC) assembled with quencher stems having lengths of ≤ 10-bp. The combination of a water-swollen/flexible matrix and the thermal stabilization capabilities of the POEGMA polymeric matrix endowed the hydrogel-immobilized aptamer reporters with greater sensitivity compared to hydrogel-free systems. The developed hydrogel-based aptamer sensor was then translated into a printable nitrocellulosesupported microarray format, with additional modulation of the SSAC configuration. DNA microarrays with even greater sensitivity were produced by rationally positioning and further shortening the quencher-stems to 7-bp using the optimized assay conditions. In addition to effective immobilization and ligand-binding affinity comparable to the native aptamer, the hydrogel interface provided protection against nucleases and supported applications using real biological samples (i.e., in human serum).","abstract_has_math":false,"creators":["Pikula, Milana"],"institution":null,"degree_name":null,"degree_level":null,"degree_discipline":null,"degree_department":"Chemical Engineering","school":null,"contributors":[],"advisors":["Dr. Filipe, Carlos"],"committee_chairs":[],"committee_members":[],"year":2024,"date_issued":"2024","date_published":"2024","updated_at":"2026-11-19T05:56:56Z","subjects":[],"languages":["en"],"rights":[],"rights_urls":[],"identifier_entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["https://doi.org/10.71548/24009"],"render_values":[{"text":"https://doi.org/10.71548/24009","href":"https://doi.org/10.71548/24009","code":true}]}],"person_identifier_entries":[]},"links":{"outbound_url":"http://hdl.handle.net/11375/29956","outbound_label":"Handle","outbound_source":"dc:identifier.uri","record_url":"http://hdl.handle.net/11375/29956","record_label":"Repository record","record_kind":"handle","record_source":"dc:identifier.uri","download_url":null,"download_label":null,"download_source":null,"access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://macsphere.mcmaster.ca/server/oai/request?verb=GetRecord&metadataPrefix=dim&identifier=oai%3Amacsphere.mcmaster.ca%3A11375%2F29956","prefix":"dim"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.advisor","label":"Advisor","values":["Dr. Filipe, Carlos"]},{"key":"dc:contributor.department","label":"Department","values":["Chemical Engineering"]},{"key":"dc:creator","label":"Author","values":["Pikula, Milana"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.accessioned","label":"Dc Date Accessioned","values":["2024-07-15T20:03:42Z"]},{"key":"dc:date.available","label":"Dc Date Available","values":["2024-07-15T20:03:42Z"]},{"key":"dc:date.issued","label":"Date","values":["2024"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.iso","label":"Language (ISO)","values":["en"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://hdl.handle.net/11375/29956","https://doi.org/10.71548/24009"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["Nucleic acids play an important role in the construction of novel biosensing units. Integrating nucleicacid- diagnostic tools with polymeric assemblies can enhance selectivity and sensitivity and protect them from nuclease digestion. In this thesis, DNA-based sensing molecules are incorporated into hydrogel films based on poly(oligoethylene glycol methacrylate) (POEGMA) to fabricate printable DNA hybridization and DNA aptamer microarrays to detect small molecules. Firstly, a printable hydrogel microarray incorporating long-chain-sensing DNA generated via a rolling circle amplification reaction was developed to exploit the benefits of isothermal nucleic acid amplification technology and the non-covalent immobilization potential of POEGMA-hydrogel films on a nitrocellulose substrate. Fluorophore-labelled nucleic acid analytes of varying sizes were spotted on hydrogel-trapped RCA sensing units and assessed on their ability to detect specific DNA hybridization events. Compared to hydrogel-free sensors, the developed sensors provided greater detection potential for small oligonucleotides while also enabling uniform spot-to-spot fluorescence signal distribution from the sensing analytes. The hydrogel’s ability to increase base-pairing affinity in short DNA duplexes was further investigated using fluorescence resonance energy transfer (FRET)-based structure-switching aptamers that bind adenosine triphosphate (ATP). Moderate thermal stabilization was observed in the hydrogel matrices embedding FRET-based structure-switching aptamer constructs (SSAC) assembled with quencher stems having lengths of ≤ 10-bp. The combination of a water-swollen/flexible matrix and the thermal stabilization capabilities of the POEGMA polymeric matrix endowed the hydrogel-immobilized aptamer reporters with greater sensitivity compared to hydrogel-free systems. The developed hydrogel-based aptamer sensor was then translated into a printable nitrocellulosesupported microarray format, with additional modulation of the SSAC configuration. DNA microarrays with even greater sensitivity were produced by rationally positioning and further shortening the quencher-stems to 7-bp using the optimized assay conditions. In addition to effective immobilization and ligand-binding affinity comparable to the native aptamer, the hydrogel interface provided protection against nucleases and supported applications using real biological samples (i.e., in human serum)."]},{"key":"dc:description.abstractgeneral","label":"General Abstract","values":["This thesis describes the integration of hydrogel material with nucleic acids for the development of biosensing platforms in the detection of small molecules. First, a DNA hybridization microarray was developed by integrating printable hydrogel with long-chain DNA sensing material based on a rolling circle amplification (RCA) product. Assembled hydrogel microarray was investigated on the ability to physically encapsulate sensing material and allow for hybridization events with fluorophore-tagged complementary oligonucleotides. The study revealed that a hydrogel-based system improves the hybridization efficiency and detection potential of very short oligonucleotides, a functional benefit that was further investigated in improving the thermodynamic stability of FRET-based structure switching aptamer constructs. The ability of hydrogel microarray to reinforce very short quencher stems while promoting solution-like affinity interactions enabled an enhanced affinity and sensitivity towards the cognate ligands, relative to hydrogel free-system."]},{"key":"dc:description.degree","label":"Dc Description Degree","values":["Doctor of Philosophy (PhD)"]},{"key":"dc:title","label":"Title","values":["Nucleic acid-based recognition events in hydrogel array systems"]},{"key":"others:access_status","label":"Others Access Status","values":["open.access"]}]}],"canonical_facts":{"dc:contributor.advisor":["Dr. Filipe, Carlos"],"dc:contributor.department":["Chemical Engineering"],"dc:creator":["Pikula, Milana"],"dc:date.accessioned":["2024-07-15T20:03:42Z"],"dc:date.available":["2024-07-15T20:03:42Z"],"dc:date.issued":["2024"],"dc:description.abstract":["Nucleic acids play an important role in the construction of novel biosensing units. Integrating nucleicacid- diagnostic tools with polymeric assemblies can enhance selectivity and sensitivity and protect them from nuclease digestion. In this thesis, DNA-based sensing molecules are incorporated into hydrogel films based on poly(oligoethylene glycol methacrylate) (POEGMA) to fabricate printable DNA hybridization and DNA aptamer microarrays to detect small molecules. Firstly, a printable hydrogel microarray incorporating long-chain-sensing DNA generated via a rolling circle amplification reaction was developed to exploit the benefits of isothermal nucleic acid amplification technology and the non-covalent immobilization potential of POEGMA-hydrogel films on a nitrocellulose substrate. Fluorophore-labelled nucleic acid analytes of varying sizes were spotted on hydrogel-trapped RCA sensing units and assessed on their ability to detect specific DNA hybridization events. Compared to hydrogel-free sensors, the developed sensors provided greater detection potential for small oligonucleotides while also enabling uniform spot-to-spot fluorescence signal distribution from the sensing analytes. The hydrogel’s ability to increase base-pairing affinity in short DNA duplexes was further investigated using fluorescence resonance energy transfer (FRET)-based structure-switching aptamers that bind adenosine triphosphate (ATP). Moderate thermal stabilization was observed in the hydrogel matrices embedding FRET-based structure-switching aptamer constructs (SSAC) assembled with quencher stems having lengths of ≤ 10-bp. The combination of a water-swollen/flexible matrix and the thermal stabilization capabilities of the POEGMA polymeric matrix endowed the hydrogel-immobilized aptamer reporters with greater sensitivity compared to hydrogel-free systems. The developed hydrogel-based aptamer sensor was then translated into a printable nitrocellulosesupported microarray format, with additional modulation of the SSAC configuration. DNA microarrays with even greater sensitivity were produced by rationally positioning and further shortening the quencher-stems to 7-bp using the optimized assay conditions. In addition to effective immobilization and ligand-binding affinity comparable to the native aptamer, the hydrogel interface provided protection against nucleases and supported applications using real biological samples (i.e., in human serum)."],"dc:description.abstractgeneral":["This thesis describes the integration of hydrogel material with nucleic acids for the development of biosensing platforms in the detection of small molecules. First, a DNA hybridization microarray was developed by integrating printable hydrogel with long-chain DNA sensing material based on a rolling circle amplification (RCA) product. Assembled hydrogel microarray was investigated on the ability to physically encapsulate sensing material and allow for hybridization events with fluorophore-tagged complementary oligonucleotides. The study revealed that a hydrogel-based system improves the hybridization efficiency and detection potential of very short oligonucleotides, a functional benefit that was further investigated in improving the thermodynamic stability of FRET-based structure switching aptamer constructs. The ability of hydrogel microarray to reinforce very short quencher stems while promoting solution-like affinity interactions enabled an enhanced affinity and sensitivity towards the cognate ligands, relative to hydrogel free-system."],"dc:description.degree":["Doctor of Philosophy (PhD)"],"dc:identifier.uri":["http://hdl.handle.net/11375/29956","https://doi.org/10.71548/24009"],"dc:language.iso":["en"],"dc:title":["Nucleic acid-based recognition events in hydrogel array systems"],"dc:type":["Thesis"],"others:access_status":["open.access"]},"updated_at":"2026-11-19T05:56:56Z"}