{"id":{"repo_id":"mcmaster","oai_identifier":"oai:macsphere.mcmaster.ca:11375/5692"},"canonical_url":"https://search.ndltd.org/etd/mcmaster/oai:macsphere.mcmaster.ca:11375/5692","repository":{"repo_id":"mcmaster","name":"McMaster University","base_url":"https://macsphere.mcmaster.ca/server/oai/request"},"display":{"title":"Ion Beam Mixing and Thermoelectric Characteristics of Bi-Sb Thin Film Alloys","abstract":"<p>This thesis is concerned with investigating the production of thin film Bi-Sb alloys by ion beam mixing. Samples were composed of a thin Sb film sandwiched between two Bi layers; the thicknesses of the films were varied to produce composition range from 0 to ~45% Sb. The overall thickness was about 55 nm.</p> <p>Analysis of the films by Rutherford Backscattering Spectrometry (RBS) and Auger Electron Spectroscopy (AES) indicated that ion beam mixing can produce uniform Bi-Sb alloys with doses of about 2.8X10¹⁵ cmˉ² of 80 KeV Ar⁺ at room temperature. The results of Electron Microscopy showed a grain growth due to ion bombardment.</p> <p>The mixing was characterized by the increase in the full width at half maximum (FWHM) of the Sb signal in the RBS spectra. It was measured as a function of ion dose, dose rate, mass, and energy. The dependence of mixing on the temperature was also investigated. A square-root dependence of mixing on the dose confirmed a diffusion like mixing process. The rate of mixing per ion dose was found to increase with the elastic energy deposited at the Bi/Sb interface. The mixing is temperature independent in the range of ~40 to ~266 K, i.e., collision cascade mixing dominates. An effective diffusion coefficient, D*, of about 4.9X10ˉ²⁸cm⁴/ion was determined. At temperatures higher than ~266 K, the mixing increases with the temperature. This suggests that a radiation enhanced diffusion mechanism is the dominant mixing process. An effective diffusion coefficient of ~1.7X10ˉ²⁷cm⁴/ion at room temperature was calculated: an activation energy of ~0.15 eV was found.</p> <p>Thermoelectric characteristics of the alloys were investigated by measuring the thermal voltage, V₃, as a function of the temperature, T, in the range 300-500 K, for alloys with various composition. The thermal voltage was found to have a linear dependence on temperature. The thermoelectric power, dV₃/dT, reaches a maximum of about 70 μV/deg, for Bi₈₇Sb₁₃. The dependence of the thermoelectric power on Sb concentration agrees with the model put forward to explain the transport properties of bulk Bi-Sb alloys. An empirical model has been proposed to relate the state of mixing with the measured thermoelectric power.</p>","abstract_html":"&lt;p&gt;This thesis is concerned with investigating the production of thin film Bi-Sb alloys by ion beam mixing. Samples were composed of a thin Sb film sandwiched between two Bi layers; the thicknesses of the films were varied to produce composition range from 0 to ~45% Sb. The overall thickness was about 55 nm.&lt;/p&gt; &lt;p&gt;Analysis of the films by Rutherford Backscattering Spectrometry (RBS) and Auger Electron Spectroscopy (AES) indicated that ion beam mixing can produce uniform Bi-Sb alloys with doses of about 2.8X10¹⁵ cmˉ² of 80 KeV Ar⁺ at room temperature. The results of Electron Microscopy showed a grain growth due to ion bombardment.&lt;/p&gt; &lt;p&gt;The mixing was characterized by the increase in the full width at half maximum (FWHM) of the Sb signal in the RBS spectra. It was measured as a function of ion dose, dose rate, mass, and energy. The dependence of mixing on the temperature was also investigated. A square-root dependence of mixing on the dose confirmed a diffusion like mixing process. The rate of mixing per ion dose was found to increase with the elastic energy deposited at the Bi/Sb interface. The mixing is temperature independent in the range of ~40 to ~266 K, i.e., collision cascade mixing dominates. An effective diffusion coefficient, D*, of about 4.9X10ˉ²⁸cm⁴/ion was determined. At temperatures higher than ~266 K, the mixing increases with the temperature. This suggests that a radiation enhanced diffusion mechanism is the dominant mixing process. An effective diffusion coefficient of ~1.7X10ˉ²⁷cm⁴/ion at room temperature was calculated: an activation energy of ~0.15 eV was found.&lt;/p&gt; &lt;p&gt;Thermoelectric characteristics of the alloys were investigated by measuring the thermal voltage, V₃, as a function of the temperature, T, in the range 300-500 K, for alloys with various composition. The thermal voltage was found to have a linear dependence on temperature. The thermoelectric power, dV₃/dT, reaches a maximum of about 70 μV/deg, for Bi₈₇Sb₁₃. The dependence of the thermoelectric power on Sb concentration agrees with the model put forward to explain the transport properties of bulk Bi-Sb alloys. An empirical model has been proposed to relate the state of mixing with the measured thermoelectric power.&lt;/p&gt;","abstract_has_math":false,"creators":["Ibrahim, Mahmoud Ahmad"],"institution":null,"degree_name":null,"degree_level":null,"degree_discipline":null,"degree_department":"Electrical Engineering","school":null,"contributors":[],"advisors":["Thompson, D.A."],"committee_chairs":[],"committee_members":[],"year":1986,"date_issued":"1986-08","date_published":"1986-08","updated_at":"2026-11-18T19:30:43Z","subjects":["Electrical and Electronics"],"languages":[],"rights":[],"rights_urls":[],"identifier_entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["https://doi.org/10.71548/8232"],"render_values":[{"text":"https://doi.org/10.71548/8232","href":"https://doi.org/10.71548/8232","code":true}]},{"key":"dc:identifier.other","label":"Dc Identifier Other","values":["opendissertations/1039","2662","1319211"],"render_values":[{"text":"opendissertations/1039","href":null,"code":true},{"text":"2662","href":null,"code":true},{"text":"1319211","href":null,"code":true}]}],"person_identifier_entries":[]},"links":{"outbound_url":"http://hdl.handle.net/11375/5692","outbound_label":"Handle","outbound_source":"dc:identifier.uri","record_url":"http://hdl.handle.net/11375/5692","record_label":"Repository record","record_kind":"handle","record_source":"dc:identifier.uri","download_url":null,"download_label":null,"download_source":null,"access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://macsphere.mcmaster.ca/server/oai/request?verb=GetRecord&metadataPrefix=dim&identifier=oai%3Amacsphere.mcmaster.ca%3A11375%2F5692","prefix":"dim"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.advisor","label":"Advisor","values":["Thompson, D.A."]},{"key":"dc:contributor.department","label":"Department","values":["Electrical Engineering"]},{"key":"dc:creator","label":"Author","values":["Ibrahim, Mahmoud Ahmad"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.accessioned","label":"Dc Date Accessioned","values":["2014-06-18T16:32:40Z"]},{"key":"dc:date.available","label":"Dc Date Available","values":["2014-06-18T16:32:40Z"]},{"key":"dc:date.created","label":"Dc Date Created","values":["2010-05-19"]},{"key":"dc:date.issued","label":"Date","values":["1986-08"]},{"key":"dc:type","label":"Dc Type","values":["thesis"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["Electrical and Electronics"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.other","label":"Dc Identifier Other","values":["opendissertations/1039","2662","1319211"]},{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://hdl.handle.net/11375/5692","https://doi.org/10.71548/8232"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["<p>This thesis is concerned with investigating the production of thin film Bi-Sb alloys by ion beam mixing. Samples were composed of a thin Sb film sandwiched between two Bi layers; the thicknesses of the films were varied to produce composition range from 0 to ~45% Sb. The overall thickness was about 55 nm.</p> <p>Analysis of the films by Rutherford Backscattering Spectrometry (RBS) and Auger Electron Spectroscopy (AES) indicated that ion beam mixing can produce uniform Bi-Sb alloys with doses of about 2.8X10¹⁵ cmˉ² of 80 KeV Ar⁺ at room temperature. The results of Electron Microscopy showed a grain growth due to ion bombardment.</p> <p>The mixing was characterized by the increase in the full width at half maximum (FWHM) of the Sb signal in the RBS spectra. It was measured as a function of ion dose, dose rate, mass, and energy. The dependence of mixing on the temperature was also investigated. A square-root dependence of mixing on the dose confirmed a diffusion like mixing process. The rate of mixing per ion dose was found to increase with the elastic energy deposited at the Bi/Sb interface. The mixing is temperature independent in the range of ~40 to ~266 K, i.e., collision cascade mixing dominates. An effective diffusion coefficient, D*, of about 4.9X10ˉ²⁸cm⁴/ion was determined. At temperatures higher than ~266 K, the mixing increases with the temperature. This suggests that a radiation enhanced diffusion mechanism is the dominant mixing process. An effective diffusion coefficient of ~1.7X10ˉ²⁷cm⁴/ion at room temperature was calculated: an activation energy of ~0.15 eV was found.</p> <p>Thermoelectric characteristics of the alloys were investigated by measuring the thermal voltage, V₃, as a function of the temperature, T, in the range 300-500 K, for alloys with various composition. The thermal voltage was found to have a linear dependence on temperature. The thermoelectric power, dV₃/dT, reaches a maximum of about 70 μV/deg, for Bi₈₇Sb₁₃. The dependence of the thermoelectric power on Sb concentration agrees with the model put forward to explain the transport properties of bulk Bi-Sb alloys. An empirical model has been proposed to relate the state of mixing with the measured thermoelectric power.</p>"]},{"key":"dc:description.degree","label":"Dc Description Degree","values":["Doctor of Philosophy (PhD)"]},{"key":"dc:title","label":"Title","values":["Ion Beam Mixing and Thermoelectric Characteristics of Bi-Sb Thin Film Alloys"]},{"key":"others:access_status","label":"Others Access Status","values":["open.access"]}]}],"canonical_facts":{"dc:contributor.advisor":["Thompson, D.A."],"dc:contributor.department":["Electrical Engineering"],"dc:creator":["Ibrahim, Mahmoud Ahmad"],"dc:date.accessioned":["2014-06-18T16:32:40Z"],"dc:date.available":["2014-06-18T16:32:40Z"],"dc:date.created":["2010-05-19"],"dc:date.issued":["1986-08"],"dc:description.abstract":["<p>This thesis is concerned with investigating the production of thin film Bi-Sb alloys by ion beam mixing. Samples were composed of a thin Sb film sandwiched between two Bi layers; the thicknesses of the films were varied to produce composition range from 0 to ~45% Sb. The overall thickness was about 55 nm.</p> <p>Analysis of the films by Rutherford Backscattering Spectrometry (RBS) and Auger Electron Spectroscopy (AES) indicated that ion beam mixing can produce uniform Bi-Sb alloys with doses of about 2.8X10¹⁵ cmˉ² of 80 KeV Ar⁺ at room temperature. The results of Electron Microscopy showed a grain growth due to ion bombardment.</p> <p>The mixing was characterized by the increase in the full width at half maximum (FWHM) of the Sb signal in the RBS spectra. It was measured as a function of ion dose, dose rate, mass, and energy. The dependence of mixing on the temperature was also investigated. A square-root dependence of mixing on the dose confirmed a diffusion like mixing process. The rate of mixing per ion dose was found to increase with the elastic energy deposited at the Bi/Sb interface. The mixing is temperature independent in the range of ~40 to ~266 K, i.e., collision cascade mixing dominates. An effective diffusion coefficient, D*, of about 4.9X10ˉ²⁸cm⁴/ion was determined. At temperatures higher than ~266 K, the mixing increases with the temperature. This suggests that a radiation enhanced diffusion mechanism is the dominant mixing process. An effective diffusion coefficient of ~1.7X10ˉ²⁷cm⁴/ion at room temperature was calculated: an activation energy of ~0.15 eV was found.</p> <p>Thermoelectric characteristics of the alloys were investigated by measuring the thermal voltage, V₃, as a function of the temperature, T, in the range 300-500 K, for alloys with various composition. The thermal voltage was found to have a linear dependence on temperature. The thermoelectric power, dV₃/dT, reaches a maximum of about 70 μV/deg, for Bi₈₇Sb₁₃. The dependence of the thermoelectric power on Sb concentration agrees with the model put forward to explain the transport properties of bulk Bi-Sb alloys. An empirical model has been proposed to relate the state of mixing with the measured thermoelectric power.</p>"],"dc:description.degree":["Doctor of Philosophy (PhD)"],"dc:identifier.other":["opendissertations/1039","2662","1319211"],"dc:identifier.uri":["http://hdl.handle.net/11375/5692","https://doi.org/10.71548/8232"],"dc:subject":["Electrical and Electronics"],"dc:title":["Ion Beam Mixing and Thermoelectric Characteristics of Bi-Sb Thin Film Alloys"],"dc:type":["thesis"],"others:access_status":["open.access"]},"updated_at":"2026-11-18T19:30:43Z"}