{"id":{"repo_id":"mcmaster","oai_identifier":"oai:macsphere.mcmaster.ca:11375/6342"},"canonical_url":"https://search.ndltd.org/etd/mcmaster/oai:macsphere.mcmaster.ca:11375/6342","repository":{"repo_id":"mcmaster","name":"McMaster University","base_url":"https://macsphere.mcmaster.ca/server/oai/request"},"display":{"title":"Evaluation of Yttrium-Doped SrTiO₃ as a Solid Oxide Fuel Cell Anode","abstract":"<p>A number of perovskite oxides, typically, heavily doped SrTiO₃ samples, were synthesized and characterized with a view to establishing their potential as anode materials for solid oxide fuel cells (SOFCs). The structure, microstructure, electrical conductivity, reduction-oxidation behavior, phase stability, compatibility with electrolytes, and performance in SOFC operation were assessed.</p> <p>Ceramic samples were prepared with the formula (Sr₁ᵪRᵪ)(Ti₁_yTy)O₃ (R = rare earth elements, T = transition metals) and with charge balance achieved by A-site deficiency. Electrical conductivities were examined by the do four-probe method and impedance spectroscopy. It was found that yttrium is soluble in SrTiO₃ (SYT) up to 8 mol% and has marked effects on conductivity. Electrical conductivities were observed to increase with increasing donor-doping level, on reduction in low oxygen partial pressures. Electrical conductivity with values as high as 82 S/cm was achieved at 800°C and P(O₂) = 10ˉ¹⁹ atm. Electrical conductivities were reversible upon reduction and oxidation. The thermal expansion coefficient is compatible with electrolyte materials such as yttria-stabilized ZrO₂ and doped LaGaO₃. Cobalt-doped SYT, which showed a relatively high resistance to oxidation, was tested as the anode material in a fuel cell. Yttrium-doped SrTiO₃ meets the requirements for the anode in SOFCs to a substantial degree, and is a promising alternative anode material.</p>","abstract_html":"&lt;p&gt;A number of perovskite oxides, typically, heavily doped SrTiO₃ samples, were synthesized and characterized with a view to establishing their potential as anode materials for solid oxide fuel cells (SOFCs). The structure, microstructure, electrical conductivity, reduction-oxidation behavior, phase stability, compatibility with electrolytes, and performance in SOFC operation were assessed.&lt;/p&gt; &lt;p&gt;Ceramic samples were prepared with the formula (Sr₁ᵪRᵪ)(Ti₁_yTy)O₃ (R = rare earth elements, T = transition metals) and with charge balance achieved by A-site deficiency. Electrical conductivities were examined by the do four-probe method and impedance spectroscopy. It was found that yttrium is soluble in SrTiO₃ (SYT) up to 8 mol% and has marked effects on conductivity. Electrical conductivities were observed to increase with increasing donor-doping level, on reduction in low oxygen partial pressures. Electrical conductivity with values as high as 82 S/cm was achieved at 800°C and P(O₂) = 10ˉ¹⁹ atm. Electrical conductivities were reversible upon reduction and oxidation. The thermal expansion coefficient is compatible with electrolyte materials such as yttria-stabilized ZrO₂ and doped LaGaO₃. Cobalt-doped SYT, which showed a relatively high resistance to oxidation, was tested as the anode material in a fuel cell. Yttrium-doped SrTiO₃ meets the requirements for the anode in SOFCs to a substantial degree, and is a promising alternative anode material.&lt;/p&gt;","abstract_has_math":false,"creators":["Hui, Shiqiang"],"institution":null,"degree_name":null,"degree_level":null,"degree_discipline":null,"degree_department":"Materials Science","school":null,"contributors":["Materials Science"],"advisors":["Petric, Anthony"],"committee_chairs":[],"committee_members":[],"year":2000,"date_issued":"2000-12","date_published":"2000-12","updated_at":"2026-11-18T19:30:25Z","subjects":["Materials Science and Engineering"],"languages":[],"rights":[],"rights_urls":[],"identifier_entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["https://doi.org/10.71548/7752"],"render_values":[{"text":"https://doi.org/10.71548/7752","href":"https://doi.org/10.71548/7752","code":true}]},{"key":"dc:identifier","label":"Identifier","values":["opendissertations/1659","2932","1350912","https://doi.org/10.71548/7752"],"render_values":[{"text":"opendissertations/1659","href":null,"code":true},{"text":"2932","href":null,"code":true},{"text":"1350912","href":null,"code":true},{"text":"https://doi.org/10.71548/7752","href":"https://doi.org/10.71548/7752","code":true}]},{"key":"dc:identifier.other","label":"Dc Identifier Other","values":["opendissertations/1659","2932","1350912"],"render_values":[{"text":"opendissertations/1659","href":null,"code":true},{"text":"2932","href":null,"code":true},{"text":"1350912","href":null,"code":true}]}],"person_identifier_entries":[]},"links":{"outbound_url":"http://hdl.handle.net/11375/6342","outbound_label":"Handle","outbound_source":"dc:identifier.uri","record_url":"http://hdl.handle.net/11375/6342","record_label":"Repository record","record_kind":"handle","record_source":"dc:identifier.uri","download_url":null,"download_label":null,"download_source":null,"access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://macsphere.mcmaster.ca/server/oai/request?verb=GetRecord&metadataPrefix=dim&identifier=oai%3Amacsphere.mcmaster.ca%3A11375%2F6342","prefix":"dim"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor","label":"Contributor","values":["Petric, Anthony","Materials Science"]},{"key":"dc:contributor.advisor","label":"Advisor","values":["Petric, Anthony"]},{"key":"dc:contributor.department","label":"Department","values":["Materials Science"]},{"key":"dc:creator","label":"Author","values":["Hui, Shiqiang"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2014-06-18T16:35:07Z","2010-06-10","2000-12"]},{"key":"dc:date.accessioned","label":"Dc Date Accessioned","values":["2014-06-18T16:35:07Z"]},{"key":"dc:date.available","label":"Dc Date Available","values":["2014-06-18T16:35:07Z"]},{"key":"dc:date.created","label":"Dc Date Created","values":["2010-06-10"]},{"key":"dc:date.issued","label":"Date","values":["2000-12"]},{"key":"dc:type","label":"Dc Type","values":["thesis"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["Materials Science and Engineering"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier","label":"Identifier","values":["opendissertations/1659","2932","1350912","http://hdl.handle.net/11375/6342","https://doi.org/10.71548/7752"]},{"key":"dc:identifier.other","label":"Dc Identifier Other","values":["opendissertations/1659","2932","1350912"]},{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://hdl.handle.net/11375/6342","https://doi.org/10.71548/7752"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description","label":"Description","values":["<p>A number of perovskite oxides, typically, heavily doped SrTiO₃ samples, were synthesized and characterized with a view to establishing their potential as anode materials for solid oxide fuel cells (SOFCs). The structure, microstructure, electrical conductivity, reduction-oxidation behavior, phase stability, compatibility with electrolytes, and performance in SOFC operation were assessed.</p> <p>Ceramic samples were prepared with the formula (Sr₁ᵪRᵪ)(Ti₁_yTy)O₃ (R = rare earth elements, T = transition metals) and with charge balance achieved by A-site deficiency. Electrical conductivities were examined by the do four-probe method and impedance spectroscopy. It was found that yttrium is soluble in SrTiO₃ (SYT) up to 8 mol% and has marked effects on conductivity. Electrical conductivities were observed to increase with increasing donor-doping level, on reduction in low oxygen partial pressures. Electrical conductivity with values as high as 82 S/cm was achieved at 800°C and P(O₂) = 10ˉ¹⁹ atm. Electrical conductivities were reversible upon reduction and oxidation. The thermal expansion coefficient is compatible with electrolyte materials such as yttria-stabilized ZrO₂ and doped LaGaO₃. Cobalt-doped SYT, which showed a relatively high resistance to oxidation, was tested as the anode material in a fuel cell. Yttrium-doped SrTiO₃ meets the requirements for the anode in SOFCs to a substantial degree, and is a promising alternative anode material.</p>","Doctor of Philosophy (PhD)"]},{"key":"dc:description.abstract","label":"Abstract","values":["<p>A number of perovskite oxides, typically, heavily doped SrTiO₃ samples, were synthesized and characterized with a view to establishing their potential as anode materials for solid oxide fuel cells (SOFCs). The structure, microstructure, electrical conductivity, reduction-oxidation behavior, phase stability, compatibility with electrolytes, and performance in SOFC operation were assessed.</p> <p>Ceramic samples were prepared with the formula (Sr₁ᵪRᵪ)(Ti₁_yTy)O₃ (R = rare earth elements, T = transition metals) and with charge balance achieved by A-site deficiency. Electrical conductivities were examined by the do four-probe method and impedance spectroscopy. It was found that yttrium is soluble in SrTiO₃ (SYT) up to 8 mol% and has marked effects on conductivity. Electrical conductivities were observed to increase with increasing donor-doping level, on reduction in low oxygen partial pressures. Electrical conductivity with values as high as 82 S/cm was achieved at 800°C and P(O₂) = 10ˉ¹⁹ atm. Electrical conductivities were reversible upon reduction and oxidation. The thermal expansion coefficient is compatible with electrolyte materials such as yttria-stabilized ZrO₂ and doped LaGaO₃. Cobalt-doped SYT, which showed a relatively high resistance to oxidation, was tested as the anode material in a fuel cell. Yttrium-doped SrTiO₃ meets the requirements for the anode in SOFCs to a substantial degree, and is a promising alternative anode material.</p>"]},{"key":"dc:description.degree","label":"Dc Description Degree","values":["Doctor of Philosophy (PhD)"]},{"key":"dc:format","label":"Dc Format","values":["application/pdf"]},{"key":"dc:title","label":"Title","values":["Evaluation of Yttrium-Doped SrTiO₃ as a Solid Oxide Fuel Cell Anode"]},{"key":"others:access_status","label":"Others Access Status","values":["open.access"]}]}],"canonical_facts":{"dc:contributor":["Petric, Anthony","Materials Science"],"dc:contributor.advisor":["Petric, Anthony"],"dc:contributor.department":["Materials Science"],"dc:creator":["Hui, Shiqiang"],"dc:date":["2014-06-18T16:35:07Z","2010-06-10","2000-12"],"dc:date.accessioned":["2014-06-18T16:35:07Z"],"dc:date.available":["2014-06-18T16:35:07Z"],"dc:date.created":["2010-06-10"],"dc:date.issued":["2000-12"],"dc:description":["<p>A number of perovskite oxides, typically, heavily doped SrTiO₃ samples, were synthesized and characterized with a view to establishing their potential as anode materials for solid oxide fuel cells (SOFCs). The structure, microstructure, electrical conductivity, reduction-oxidation behavior, phase stability, compatibility with electrolytes, and performance in SOFC operation were assessed.</p> <p>Ceramic samples were prepared with the formula (Sr₁ᵪRᵪ)(Ti₁_yTy)O₃ (R = rare earth elements, T = transition metals) and with charge balance achieved by A-site deficiency. Electrical conductivities were examined by the do four-probe method and impedance spectroscopy. It was found that yttrium is soluble in SrTiO₃ (SYT) up to 8 mol% and has marked effects on conductivity. Electrical conductivities were observed to increase with increasing donor-doping level, on reduction in low oxygen partial pressures. Electrical conductivity with values as high as 82 S/cm was achieved at 800°C and P(O₂) = 10ˉ¹⁹ atm. Electrical conductivities were reversible upon reduction and oxidation. The thermal expansion coefficient is compatible with electrolyte materials such as yttria-stabilized ZrO₂ and doped LaGaO₃. Cobalt-doped SYT, which showed a relatively high resistance to oxidation, was tested as the anode material in a fuel cell. Yttrium-doped SrTiO₃ meets the requirements for the anode in SOFCs to a substantial degree, and is a promising alternative anode material.</p>","Doctor of Philosophy (PhD)"],"dc:description.abstract":["<p>A number of perovskite oxides, typically, heavily doped SrTiO₃ samples, were synthesized and characterized with a view to establishing their potential as anode materials for solid oxide fuel cells (SOFCs). The structure, microstructure, electrical conductivity, reduction-oxidation behavior, phase stability, compatibility with electrolytes, and performance in SOFC operation were assessed.</p> <p>Ceramic samples were prepared with the formula (Sr₁ᵪRᵪ)(Ti₁_yTy)O₃ (R = rare earth elements, T = transition metals) and with charge balance achieved by A-site deficiency. Electrical conductivities were examined by the do four-probe method and impedance spectroscopy. It was found that yttrium is soluble in SrTiO₃ (SYT) up to 8 mol% and has marked effects on conductivity. Electrical conductivities were observed to increase with increasing donor-doping level, on reduction in low oxygen partial pressures. Electrical conductivity with values as high as 82 S/cm was achieved at 800°C and P(O₂) = 10ˉ¹⁹ atm. Electrical conductivities were reversible upon reduction and oxidation. The thermal expansion coefficient is compatible with electrolyte materials such as yttria-stabilized ZrO₂ and doped LaGaO₃. Cobalt-doped SYT, which showed a relatively high resistance to oxidation, was tested as the anode material in a fuel cell. Yttrium-doped SrTiO₃ meets the requirements for the anode in SOFCs to a substantial degree, and is a promising alternative anode material.</p>"],"dc:description.degree":["Doctor of Philosophy (PhD)"],"dc:format":["application/pdf"],"dc:identifier":["opendissertations/1659","2932","1350912","http://hdl.handle.net/11375/6342","https://doi.org/10.71548/7752"],"dc:identifier.other":["opendissertations/1659","2932","1350912"],"dc:identifier.uri":["http://hdl.handle.net/11375/6342","https://doi.org/10.71548/7752"],"dc:subject":["Materials Science and Engineering"],"dc:title":["Evaluation of Yttrium-Doped SrTiO₃ as a Solid Oxide Fuel Cell Anode"],"dc:type":["thesis"],"others:access_status":["open.access"]},"updated_at":"2026-11-18T19:30:25Z"}