{"id":{"repo_id":"mtu","oai_identifier":"oai:digitalcommons.mtu.edu:etdr-1225"},"canonical_url":"https://search.ndltd.org/etd/mtu/oai:digitalcommons.mtu.edu:etdr-1225","repository":{"repo_id":"mtu","name":"Michigan Technological University","base_url":"https://digitalcommons.mtu.edu/do/oai/"},"display":{"title":"NANOSPHERE LITHOGRAPHY AND ITS APPLICATION IN RAPID AND ECONOMIC FABRICATION OF PLASMONIC HYDROGENATED AMORPHOUS SILICON PHOTOVOLTAIC DEVICES","abstract":"Solar photovoltaic (PV) devices harvest energy from solar radiation and convert it to electricity. PV technologies, as an alternative to traditional fossil fuels, use clean and renewable energy while minimizing pollution. For decades researchers have been developing thin film solar cells as an important alternatives to the relatively expensive bulk crystal solar cell technology. Among those, hydrogenated amorphous silicon (a-Si:H) solar cells prevails for good efficiency, non-toxic and materially abundant nature. However, a-Si:H thickness must be minimized to prevent light induced degradation, so optical enhancement is necessary. Light manipulation has to be applied and carefully engineered to trap light within the active layer(s) of the cell using an inexpensive processing techniques. Plasmonic nanostructure allows manipulation of light to be fine-tuned at nanoscale by enabling plasmonic induced scattering, near-field effect and supported surface plasmon plariton (SPP). However traditional fabrication techniques for fabricating nanoscale plasmonic structure are expensive and cumbersome. In this research studies have been conducted to explore the inexpensive fabrication technologies. As a result, nanosphere lithography (NSL) is chosen as a masking material to create scalable plasmonic nanoparticles at low cost. With computer aided design and numerical simulation, the physics behind plasmonic resonance and cell performance is revealed and the geometry and parameters of plasmonic nanostructure are optimized. Finally, a proof-of-concept study has been made to show the effective enhancement in a-Si:H using plasmonic nanostructures fabricate with NSL. The research indicates the feasibility of using the proposed method for commercializing plasmonic a-Si:H solar cells. This material is based upon work supported by the National Science Foundation under grant award number CBET-1235750.","abstract_html":"Solar photovoltaic (PV) devices harvest energy from solar radiation and convert it to electricity. PV technologies, as an alternative to traditional fossil fuels, use clean and renewable energy while minimizing pollution. For decades researchers have been developing thin film solar cells as an important alternatives to the relatively expensive bulk crystal solar cell technology. Among those, hydrogenated amorphous silicon (a-Si:H) solar cells prevails for good efficiency, non-toxic and materially abundant nature. However, a-Si:H thickness must be minimized to prevent light induced degradation, so optical enhancement is necessary. Light manipulation has to be applied and carefully engineered to trap light within the active layer(s) of the cell using an inexpensive processing techniques. Plasmonic nanostructure allows manipulation of light to be fine-tuned at nanoscale by enabling plasmonic induced scattering, near-field effect and supported surface plasmon plariton (SPP). However traditional fabrication techniques for fabricating nanoscale plasmonic structure are expensive and cumbersome. In this research studies have been conducted to explore the inexpensive fabrication technologies. As a result, nanosphere lithography (NSL) is chosen as a masking material to create scalable plasmonic nanoparticles at low cost. With computer aided design and numerical simulation, the physics behind plasmonic resonance and cell performance is revealed and the geometry and parameters of plasmonic nanostructure are optimized. Finally, a proof-of-concept study has been made to show the effective enhancement in a-Si:H using plasmonic nanostructures fabricate with NSL. The research indicates the feasibility of using the proposed method for commercializing plasmonic a-Si:H solar cells. This material is based upon work supported by the National Science Foundation under grant award number CBET-1235750.","abstract_has_math":false,"creators":["Zhang, Chenlong"],"institution":null,"degree_name":"Doctor of Philosophy in Materials Science and Engineering (PhD)","degree_level":"Open Access Dissertation","degree_discipline":"Department of Materials Science and Engineering","degree_department":null,"school":null,"contributors":["Joshua M. Pearce"],"advisors":[],"committee_chairs":[],"committee_members":["Yun Hang Hu","Paul L. Bergstrom","Stephen Hackney"],"year":null,"date_issued":"","date_published":null,"updated_at":"2026-11-19T08:16:45Z","subjects":["solar cell","amorphous silicon","nanosphere","lithography","scattering","plasmonics","Electromagnetics and Photonics","Electronic Devices and Semiconductor Manufacturing","Nanoscience and Nanotechnology","Nanotechnology Fabrication","Semiconductor and Optical Materials"],"languages":[],"rights":[],"rights_urls":[],"identifier_entries":[{"key":"dc:identifier","label":"Identifier","values":["https://digitalcommons.mtu.edu/etdr/229"],"render_values":[{"text":"https://digitalcommons.mtu.edu/etdr/229","href":"https://digitalcommons.mtu.edu/etdr/229","code":true}]}],"person_identifier_entries":[]},"links":{"outbound_url":"https://doi.org/10.37099/mtu.dc.etdr/229","outbound_label":"DOI","outbound_source":"dc:identifier","record_url":"https://doi.org/10.37099/mtu.dc.etdr/229","record_label":"Repository record","record_kind":"doi","record_source":"dc:identifier","download_url":null,"download_label":null,"download_source":null,"access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://digitalcommons.mtu.edu/do/oai/?verb=GetRecord&metadataPrefix=oai_etdms&identifier=oai%3Adigitalcommons.mtu.edu%3Aetdr-1225","prefix":"oai_etdms"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor","label":"Contributor","values":["Joshua M. Pearce"]},{"key":"dc:contributor.committeemember","label":"Committee Member","values":["Yun Hang Hu","Paul L. Bergstrom","Stephen Hackney"]},{"key":"dc:creator","label":"Author","values":["Zhang, Chenlong"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.available","label":"Dc Date Available","values":["2017-07-15T07:00:00Z"]},{"key":"dc:date.created","label":"Dc Date Created","values":["2016-01-01T08:00:00Z"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Department of Materials Science and Engineering"]},{"key":"thesis:degree_level","label":"Degree Level","values":["Open Access Dissertation"]},{"key":"thesis:degree_name","label":"Degree Name","values":["Doctor of Philosophy in Materials Science and Engineering (PhD)"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["solar cell","amorphous silicon","nanosphere","lithography","scattering","plasmonics","Electromagnetics and Photonics","Electronic Devices and Semiconductor Manufacturing","Nanoscience and Nanotechnology","Nanotechnology Fabrication","Semiconductor and Optical Materials"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier","label":"Identifier","values":["10.37099/mtu.dc.etdr/229","https://digitalcommons.mtu.edu/etdr/229"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["Solar photovoltaic (PV) devices harvest energy from solar radiation and convert it to electricity. PV technologies, as an alternative to traditional fossil fuels, use clean and renewable energy while minimizing pollution. For decades researchers have been developing thin film solar cells as an important alternatives to the relatively expensive bulk crystal solar cell technology. Among those, hydrogenated amorphous silicon (a-Si:H) solar cells prevails for good efficiency, non-toxic and materially abundant nature. However, a-Si:H thickness must be minimized to prevent light induced degradation, so optical enhancement is necessary. Light manipulation has to be applied and carefully engineered to trap light within the active layer(s) of the cell using an inexpensive processing techniques. Plasmonic nanostructure allows manipulation of light to be fine-tuned at nanoscale by enabling plasmonic induced scattering, near-field effect and supported surface plasmon plariton (SPP). However traditional fabrication techniques for fabricating nanoscale plasmonic structure are expensive and cumbersome. In this research studies have been conducted to explore the inexpensive fabrication technologies. As a result, nanosphere lithography (NSL) is chosen as a masking material to create scalable plasmonic nanoparticles at low cost. With computer aided design and numerical simulation, the physics behind plasmonic resonance and cell performance is revealed and the geometry and parameters of plasmonic nanostructure are optimized. Finally, a proof-of-concept study has been made to show the effective enhancement in a-Si:H using plasmonic nanostructures fabricate with NSL. The research indicates the feasibility of using the proposed method for commercializing plasmonic a-Si:H solar cells. This material is based upon work supported by the National Science Foundation under grant award number CBET-1235750."]},{"key":"dc:description.note","label":"Dc Description Note","values":["<p>This is a good university, I'll recommend my friend to work/study here</p>"]},{"key":"dc:title","label":"Title","values":["NANOSPHERE LITHOGRAPHY AND ITS APPLICATION IN RAPID AND ECONOMIC FABRICATION OF PLASMONIC HYDROGENATED AMORPHOUS SILICON PHOTOVOLTAIC DEVICES"]}]}],"canonical_facts":{"dc:contributor":["Joshua M. Pearce"],"dc:contributor.committeemember":["Yun Hang Hu","Paul L. Bergstrom","Stephen Hackney"],"dc:creator":["Zhang, Chenlong"],"dc:date.available":["2017-07-15T07:00:00Z"],"dc:date.created":["2016-01-01T08:00:00Z"],"dc:description.abstract":["Solar photovoltaic (PV) devices harvest energy from solar radiation and convert it to electricity. PV technologies, as an alternative to traditional fossil fuels, use clean and renewable energy while minimizing pollution. For decades researchers have been developing thin film solar cells as an important alternatives to the relatively expensive bulk crystal solar cell technology. Among those, hydrogenated amorphous silicon (a-Si:H) solar cells prevails for good efficiency, non-toxic and materially abundant nature. However, a-Si:H thickness must be minimized to prevent light induced degradation, so optical enhancement is necessary. Light manipulation has to be applied and carefully engineered to trap light within the active layer(s) of the cell using an inexpensive processing techniques. Plasmonic nanostructure allows manipulation of light to be fine-tuned at nanoscale by enabling plasmonic induced scattering, near-field effect and supported surface plasmon plariton (SPP). However traditional fabrication techniques for fabricating nanoscale plasmonic structure are expensive and cumbersome. In this research studies have been conducted to explore the inexpensive fabrication technologies. As a result, nanosphere lithography (NSL) is chosen as a masking material to create scalable plasmonic nanoparticles at low cost. With computer aided design and numerical simulation, the physics behind plasmonic resonance and cell performance is revealed and the geometry and parameters of plasmonic nanostructure are optimized. Finally, a proof-of-concept study has been made to show the effective enhancement in a-Si:H using plasmonic nanostructures fabricate with NSL. The research indicates the feasibility of using the proposed method for commercializing plasmonic a-Si:H solar cells. This material is based upon work supported by the National Science Foundation under grant award number CBET-1235750."],"dc:description.note":["<p>This is a good university, I'll recommend my friend to work/study here</p>"],"dc:identifier":["10.37099/mtu.dc.etdr/229","https://digitalcommons.mtu.edu/etdr/229"],"dc:subject":["solar cell","amorphous silicon","nanosphere","lithography","scattering","plasmonics","Electromagnetics and Photonics","Electronic Devices and Semiconductor Manufacturing","Nanoscience and Nanotechnology","Nanotechnology Fabrication","Semiconductor and Optical Materials"],"dc:title":["NANOSPHERE LITHOGRAPHY AND ITS APPLICATION IN RAPID AND ECONOMIC FABRICATION OF PLASMONIC HYDROGENATED AMORPHOUS SILICON PHOTOVOLTAIC DEVICES"],"thesis:degree_discipline":["Department of Materials Science and Engineering"],"thesis:degree_level":["Open Access Dissertation"],"thesis:degree_name":["Doctor of Philosophy in Materials Science and Engineering (PhD)"]},"updated_at":"2026-11-19T08:16:45Z"}