{"id":{"repo_id":"mtu","oai_identifier":"oai:digitalcommons.mtu.edu:etdr-1238"},"canonical_url":"https://search.ndltd.org/etd/mtu/oai:digitalcommons.mtu.edu:etdr-1238","repository":{"repo_id":"mtu","name":"Michigan Technological University","base_url":"https://digitalcommons.mtu.edu/do/oai/"},"display":{"title":"MECHANICAL TESTING OF FUSED FILAMENT 3-D PRINTED COMPONENTS FOR DISTRIBUTED MANUFACTURING","abstract":"Fused filament fabrication (FFF)-based open-source 3-D printers offer the potential of decentralized manufacturing both in developing and developed countries. Unfortunately, a severe lack of data and standards relating to material properties and printed components limit this potential. This thesis first investigates the mechanical properties of a wide-range of FFF materials and provides a database of mechanical strength of the materials tested. The results demonstrate that the tensile strength of a 3-D printed specimen depends largely on the mass of the specimen, which provides a means to estimate the strength of 3-D printed components. Then this information is used to evaluate a bicycled pedal, which was 3-D printed and tested following the CEN (European Committee for Standardization) standards for racing bicycles. The results show the pedals meet the CEN standards and can be used on bicycles at lower costs than standard pedals. This investigation indicates the viability of distributed manufacturing.","abstract_html":"Fused filament fabrication (FFF)-based open-source 3-D printers offer the potential of decentralized manufacturing both in developing and developed countries. Unfortunately, a severe lack of data and standards relating to material properties and printed components limit this potential. This thesis first investigates the mechanical properties of a wide-range of FFF materials and provides a database of mechanical strength of the materials tested. The results demonstrate that the tensile strength of a 3-D printed specimen depends largely on the mass of the specimen, which provides a means to estimate the strength of 3-D printed components. Then this information is used to evaluate a bicycled pedal, which was 3-D printed and tested following the CEN (European Committee for Standardization) standards for racing bicycles. The results show the pedals meet the CEN standards and can be used on bicycles at lower costs than standard pedals. This investigation indicates the viability of distributed manufacturing.","abstract_has_math":false,"creators":["Tanikella, Nagendra Gautam"],"institution":null,"degree_name":"Master of Science in Mechanical Engineering (MS)","degree_level":"Open Access Master's Thesis","degree_discipline":"Department of Mechanical Engineering-Engineering Mechanics","degree_department":null,"school":null,"contributors":["Joshua Pearce","John Gershenson"],"advisors":[],"committee_chairs":[],"committee_members":["John Irwin"],"year":null,"date_issued":"","date_published":null,"updated_at":"2026-11-19T08:16:45Z","subjects":["3D-Printing","RepRap","Tensile strength","Mechanical Properties","Distributed Manufacturing","Bicycle","Manufacturing","Other Materials Science and Engineering","Polymer and Organic Materials"],"languages":[],"rights":[],"rights_urls":[],"identifier_entries":[{"key":"dc:identifier","label":"Identifier","values":["https://digitalcommons.mtu.edu/etdr/212"],"render_values":[{"text":"https://digitalcommons.mtu.edu/etdr/212","href":"https://digitalcommons.mtu.edu/etdr/212","code":true}]}],"person_identifier_entries":[]},"links":{"outbound_url":"https://doi.org/10.37099/mtu.dc.etdr/212","outbound_label":"DOI","outbound_source":"dc:identifier","record_url":"https://doi.org/10.37099/mtu.dc.etdr/212","record_label":"Repository record","record_kind":"doi","record_source":"dc:identifier","download_url":null,"download_label":null,"download_source":null,"access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://digitalcommons.mtu.edu/do/oai/?verb=GetRecord&metadataPrefix=oai_etdms&identifier=oai%3Adigitalcommons.mtu.edu%3Aetdr-1238","prefix":"oai_etdms"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor","label":"Contributor","values":["Joshua Pearce","John Gershenson"]},{"key":"dc:contributor.committeemember","label":"Committee Member","values":["John Irwin"]},{"key":"dc:creator","label":"Author","values":["Tanikella, Nagendra Gautam"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.available","label":"Dc Date Available","values":["2017-08-11T07:00:00Z"]},{"key":"dc:date.created","label":"Dc Date Created","values":["2016-01-01T08:00:00Z"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Department of Mechanical Engineering-Engineering Mechanics"]},{"key":"thesis:degree_level","label":"Degree Level","values":["Open Access Master's Thesis"]},{"key":"thesis:degree_name","label":"Degree Name","values":["Master of Science in Mechanical Engineering (MS)"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["3D-Printing","RepRap","Tensile strength","Mechanical Properties","Distributed Manufacturing","Bicycle","Manufacturing","Other Materials Science and Engineering","Polymer and Organic Materials"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier","label":"Identifier","values":["10.37099/mtu.dc.etdr/212","https://digitalcommons.mtu.edu/etdr/212"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["Fused filament fabrication (FFF)-based open-source 3-D printers offer the potential of decentralized manufacturing both in developing and developed countries. Unfortunately, a severe lack of data and standards relating to material properties and printed components limit this potential. This thesis first investigates the mechanical properties of a wide-range of FFF materials and provides a database of mechanical strength of the materials tested. The results demonstrate that the tensile strength of a 3-D printed specimen depends largely on the mass of the specimen, which provides a means to estimate the strength of 3-D printed components. Then this information is used to evaluate a bicycled pedal, which was 3-D printed and tested following the CEN (European Committee for Standardization) standards for racing bicycles. The results show the pedals meet the CEN standards and can be used on bicycles at lower costs than standard pedals. This investigation indicates the viability of distributed manufacturing."]},{"key":"dc:title","label":"Title","values":["MECHANICAL TESTING OF FUSED FILAMENT 3-D PRINTED COMPONENTS FOR DISTRIBUTED MANUFACTURING"]}]}],"canonical_facts":{"dc:contributor":["Joshua Pearce","John Gershenson"],"dc:contributor.committeemember":["John Irwin"],"dc:creator":["Tanikella, Nagendra Gautam"],"dc:date.available":["2017-08-11T07:00:00Z"],"dc:date.created":["2016-01-01T08:00:00Z"],"dc:description.abstract":["Fused filament fabrication (FFF)-based open-source 3-D printers offer the potential of decentralized manufacturing both in developing and developed countries. Unfortunately, a severe lack of data and standards relating to material properties and printed components limit this potential. This thesis first investigates the mechanical properties of a wide-range of FFF materials and provides a database of mechanical strength of the materials tested. The results demonstrate that the tensile strength of a 3-D printed specimen depends largely on the mass of the specimen, which provides a means to estimate the strength of 3-D printed components. Then this information is used to evaluate a bicycled pedal, which was 3-D printed and tested following the CEN (European Committee for Standardization) standards for racing bicycles. The results show the pedals meet the CEN standards and can be used on bicycles at lower costs than standard pedals. This investigation indicates the viability of distributed manufacturing."],"dc:identifier":["10.37099/mtu.dc.etdr/212","https://digitalcommons.mtu.edu/etdr/212"],"dc:subject":["3D-Printing","RepRap","Tensile strength","Mechanical Properties","Distributed Manufacturing","Bicycle","Manufacturing","Other Materials Science and Engineering","Polymer and Organic Materials"],"dc:title":["MECHANICAL TESTING OF FUSED FILAMENT 3-D PRINTED COMPONENTS FOR DISTRIBUTED MANUFACTURING"],"thesis:degree_discipline":["Department of Mechanical Engineering-Engineering Mechanics"],"thesis:degree_level":["Open Access Master's Thesis"],"thesis:degree_name":["Master of Science in Mechanical Engineering (MS)"]},"updated_at":"2026-11-19T08:16:45Z"}