{"id":{"repo_id":"mtu","oai_identifier":"oai:digitalcommons.mtu.edu:etdr-1400"},"canonical_url":"https://search.ndltd.org/etd/mtu/oai:digitalcommons.mtu.edu:etdr-1400","repository":{"repo_id":"mtu","name":"Michigan Technological University","base_url":"https://digitalcommons.mtu.edu/do/oai/"},"display":{"title":"Detecting Overpressure Zones by Using Model Based Inversion in Kupe Field, New Zealand","abstract":"Overpressure is a significant parameter during a drilling process in oil exploration. This phenomenon happens when pore pressure exceeds the limit of hydrostatic pressure in a formation and causes drastic hazards such as blow outs while drilling. This thesis focuses on the determination of possible overpressure areas and studies at three wells in Kupe Field, which is considered to be a natural-gas field in Taranaki Basin. In an effort to identify potential overpressure zones at the Kupe Field, acoustic impedance responses of 3D seismic data for three wells, along with their well log responses were evaluated. Seismic inversion plays an important role in identifying overpressure zones. Thus, wavelet extraction, well correlation (well-tie), horizon determination and picking, then model-based seismic inversion, calibrating pressure to well logs and seismic data were applied to Kerry 3D post stack seismic data to obtain acoustic impedance and a pore pressure map, which are the important indicators of overpressure existence. With the findings of pore pressure values, we are able to predict and determine the location of overpressure zone in the Otaraoa Formation in Kupe Field. This analysis was supported by well log responses in the zone. Kupe South-1 well, Kupe South-2 well and Kupe-1 well log responses were evaluated besides their mud change parameters indicated overpressured zones. Density and sonic log responses were examined for each of three wells. The intervals of potential overpressure location determined by seismic acoustic impedance and a pore pressure that shows a reasonable consistency with well log and mud change data.","abstract_html":"Overpressure is a significant parameter during a drilling process in oil exploration. This phenomenon happens when pore pressure exceeds the limit of hydrostatic pressure in a formation and causes drastic hazards such as blow outs while drilling. This thesis focuses on the determination of possible overpressure areas and studies at three wells in Kupe Field, which is considered to be a natural-gas field in Taranaki Basin. In an effort to identify potential overpressure zones at the Kupe Field, acoustic impedance responses of 3D seismic data for three wells, along with their well log responses were evaluated. Seismic inversion plays an important role in identifying overpressure zones. Thus, wavelet extraction, well correlation (well-tie), horizon determination and picking, then model-based seismic inversion, calibrating pressure to well logs and seismic data were applied to Kerry 3D post stack seismic data to obtain acoustic impedance and a pore pressure map, which are the important indicators of overpressure existence. With the findings of pore pressure values, we are able to predict and determine the location of overpressure zone in the Otaraoa Formation in Kupe Field. This analysis was supported by well log responses in the zone. Kupe South-1 well, Kupe South-2 well and Kupe-1 well log responses were evaluated besides their mud change parameters indicated overpressured zones. Density and sonic log responses were examined for each of three wells. The intervals of potential overpressure location determined by seismic acoustic impedance and a pore pressure that shows a reasonable consistency with well log and mud change data.","abstract_has_math":false,"creators":["Cakir, Timucin"],"institution":null,"degree_name":"Master of Science in Geophysics (MS)","degree_level":"Open Access Master's Thesis","degree_discipline":"Department of Geological and Mining Engineering and Sciences","degree_department":null,"school":null,"contributors":["Wayne D. Pennington"],"advisors":[],"committee_chairs":[],"committee_members":["Mir Sadri-Sabet","Gregory P. Waite"],"year":null,"date_issued":"","date_published":null,"updated_at":"2026-11-19T08:17:02Z","subjects":["Overpressure","Kupe","Seismic","Inversion","pressure","calibration","Geophysics and Seismology","Petroleum Engineering"],"languages":[],"rights":[],"rights_urls":[],"identifier_entries":[{"key":"dc:identifier","label":"Identifier","values":["https://digitalcommons.mtu.edu/etdr/321"],"render_values":[{"text":"https://digitalcommons.mtu.edu/etdr/321","href":"https://digitalcommons.mtu.edu/etdr/321","code":true}]}],"person_identifier_entries":[]},"links":{"outbound_url":"https://doi.org/10.37099/mtu.dc.etdr/321","outbound_label":"DOI","outbound_source":"dc:identifier","record_url":"https://doi.org/10.37099/mtu.dc.etdr/321","record_label":"Repository record","record_kind":"doi","record_source":"dc:identifier","download_url":null,"download_label":null,"download_source":null,"access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://digitalcommons.mtu.edu/do/oai/?verb=GetRecord&metadataPrefix=oai_etdms&identifier=oai%3Adigitalcommons.mtu.edu%3Aetdr-1400","prefix":"oai_etdms"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor","label":"Contributor","values":["Wayne D. Pennington"]},{"key":"dc:contributor.committeemember","label":"Committee Member","values":["Mir Sadri-Sabet","Gregory P. Waite"]},{"key":"dc:creator","label":"Author","values":["Cakir, Timucin"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.created","label":"Dc Date Created","values":["2017-01-01T08:00:00Z"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Department of Geological and Mining Engineering and Sciences"]},{"key":"thesis:degree_level","label":"Degree Level","values":["Open Access Master's Thesis"]},{"key":"thesis:degree_name","label":"Degree Name","values":["Master of Science in Geophysics (MS)"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["Overpressure","Kupe","Seismic","Inversion","pressure","calibration","Geophysics and Seismology","Petroleum Engineering"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier","label":"Identifier","values":["10.37099/mtu.dc.etdr/321","https://digitalcommons.mtu.edu/etdr/321"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["Overpressure is a significant parameter during a drilling process in oil exploration. This phenomenon happens when pore pressure exceeds the limit of hydrostatic pressure in a formation and causes drastic hazards such as blow outs while drilling. This thesis focuses on the determination of possible overpressure areas and studies at three wells in Kupe Field, which is considered to be a natural-gas field in Taranaki Basin. In an effort to identify potential overpressure zones at the Kupe Field, acoustic impedance responses of 3D seismic data for three wells, along with their well log responses were evaluated. Seismic inversion plays an important role in identifying overpressure zones. Thus, wavelet extraction, well correlation (well-tie), horizon determination and picking, then model-based seismic inversion, calibrating pressure to well logs and seismic data were applied to Kerry 3D post stack seismic data to obtain acoustic impedance and a pore pressure map, which are the important indicators of overpressure existence. With the findings of pore pressure values, we are able to predict and determine the location of overpressure zone in the Otaraoa Formation in Kupe Field. This analysis was supported by well log responses in the zone. Kupe South-1 well, Kupe South-2 well and Kupe-1 well log responses were evaluated besides their mud change parameters indicated overpressured zones. Density and sonic log responses were examined for each of three wells. The intervals of potential overpressure location determined by seismic acoustic impedance and a pore pressure that shows a reasonable consistency with well log and mud change data."]},{"key":"dc:description.note","label":"Dc Description Note","values":["<p>I am not ever intending to publish this work so preface and footnote are not needed.</p>"]},{"key":"dc:title","label":"Title","values":["Detecting Overpressure Zones by Using Model Based Inversion in Kupe Field, New Zealand"]}]}],"canonical_facts":{"dc:contributor":["Wayne D. Pennington"],"dc:contributor.committeemember":["Mir Sadri-Sabet","Gregory P. Waite"],"dc:creator":["Cakir, Timucin"],"dc:date.created":["2017-01-01T08:00:00Z"],"dc:description.abstract":["Overpressure is a significant parameter during a drilling process in oil exploration. This phenomenon happens when pore pressure exceeds the limit of hydrostatic pressure in a formation and causes drastic hazards such as blow outs while drilling. This thesis focuses on the determination of possible overpressure areas and studies at three wells in Kupe Field, which is considered to be a natural-gas field in Taranaki Basin. In an effort to identify potential overpressure zones at the Kupe Field, acoustic impedance responses of 3D seismic data for three wells, along with their well log responses were evaluated. Seismic inversion plays an important role in identifying overpressure zones. Thus, wavelet extraction, well correlation (well-tie), horizon determination and picking, then model-based seismic inversion, calibrating pressure to well logs and seismic data were applied to Kerry 3D post stack seismic data to obtain acoustic impedance and a pore pressure map, which are the important indicators of overpressure existence. With the findings of pore pressure values, we are able to predict and determine the location of overpressure zone in the Otaraoa Formation in Kupe Field. This analysis was supported by well log responses in the zone. Kupe South-1 well, Kupe South-2 well and Kupe-1 well log responses were evaluated besides their mud change parameters indicated overpressured zones. Density and sonic log responses were examined for each of three wells. The intervals of potential overpressure location determined by seismic acoustic impedance and a pore pressure that shows a reasonable consistency with well log and mud change data."],"dc:description.note":["<p>I am not ever intending to publish this work so preface and footnote are not needed.</p>"],"dc:identifier":["10.37099/mtu.dc.etdr/321","https://digitalcommons.mtu.edu/etdr/321"],"dc:subject":["Overpressure","Kupe","Seismic","Inversion","pressure","calibration","Geophysics and Seismology","Petroleum Engineering"],"dc:title":["Detecting Overpressure Zones by Using Model Based Inversion in Kupe Field, New Zealand"],"thesis:degree_discipline":["Department of Geological and Mining Engineering and Sciences"],"thesis:degree_level":["Open Access Master's Thesis"],"thesis:degree_name":["Master of Science in Geophysics (MS)"]},"updated_at":"2026-11-19T08:17:02Z"}