{"id":{"repo_id":"mtu","oai_identifier":"oai:digitalcommons.mtu.edu:etdr-2015"},"canonical_url":"https://search.ndltd.org/etd/mtu/oai:digitalcommons.mtu.edu:etdr-2015","repository":{"repo_id":"mtu","name":"Michigan Technological University","base_url":"https://digitalcommons.mtu.edu/do/oai/"},"display":{"title":"Modeling and Control of Maximum Pressure Rise Rate in RCCI Engines","abstract":"Low Temperature Combustion (LTC) is a combustion strategy that burns fuel at lower temperatures and leaner mixtures in order to achieve high efficiency and near zero NOx emissions. Since the combustion happens at lower temperatures it inhibits the formation of NOx and soot emissions. One such strategy is Reactivity Controlled Compression Ignition (RCCI). One characteristic of RCCI combustion and LTC com- bustion in general is short burn durations which leads to high Pressure Rise Rates (PRR). This limits the operation of these engines to lower loads as at high loads, the Maximum Pressure Rise Rate (MPRR) hinders the use of this combustion strategy. This thesis focuses on the development of a model based controller that can control the Crank Angle for 50% mass fraction burn (CA50) and Indicated Mean Effective Pressure (IMEP) of an RCCI engine while limiting the MPRR to a pre determined limit. A Control Oriented Model (COM) is developed to predict the MPRR in an RCCI engine. This COM is then validated against experimental data. A statistical analysis of the experimental data is conducted to understand the accuracy of the COM. The results show that the COM is able to predict the MPRR with reasonable accuracy in steady state and transient conditions. Also, the COM is able to capture the trends during transient operation. This COM is then included in an existing cycle by cycle dynamic RCCI engine model and used to develop a Linear Parameter Varying (LPV) representation of an RCCI engine using Data Driven Modeling (DDM) approach with Support Vector Machines (SVM). This LPV representation is then used along with a Model Predictive Controller (MPC) to control the CA50 and IMEP of the RCCI engine model while limiting the MPRR. The controller was able to track the desired CA50 and IMEP with a mean error of 0.9 CAD and 4.7 KPa respectively while maintaining the MPRR below 5.8 bar/CAD.","abstract_html":"Low Temperature Combustion (LTC) is a combustion strategy that burns fuel at lower temperatures and leaner mixtures in order to achieve high efficiency and near zero NOx emissions. Since the combustion happens at lower temperatures it inhibits the formation of NOx and soot emissions. One such strategy is Reactivity Controlled Compression Ignition (RCCI). One characteristic of RCCI combustion and LTC com- bustion in general is short burn durations which leads to high Pressure Rise Rates (PRR). This limits the operation of these engines to lower loads as at high loads, the Maximum Pressure Rise Rate (MPRR) hinders the use of this combustion strategy. This thesis focuses on the development of a model based controller that can control the Crank Angle for 50% mass fraction burn (CA50) and Indicated Mean Effective Pressure (IMEP) of an RCCI engine while limiting the MPRR to a pre determined limit. A Control Oriented Model (COM) is developed to predict the MPRR in an RCCI engine. This COM is then validated against experimental data. A statistical analysis of the experimental data is conducted to understand the accuracy of the COM. The results show that the COM is able to predict the MPRR with reasonable accuracy in steady state and transient conditions. Also, the COM is able to capture the trends during transient operation. This COM is then included in an existing cycle by cycle dynamic RCCI engine model and used to develop a Linear Parameter Varying (LPV) representation of an RCCI engine using Data Driven Modeling (DDM) approach with Support Vector Machines (SVM). This LPV representation is then used along with a Model Predictive Controller (MPC) to control the CA50 and IMEP of the RCCI engine model while limiting the MPRR. The controller was able to track the desired CA50 and IMEP with a mean error of 0.9 CAD and 4.7 KPa respectively while maintaining the MPRR below 5.8 bar/CAD.","abstract_has_math":false,"creators":["Basina, Aditya"],"institution":null,"degree_name":"Master of Science in Mechanical Engineering (MS)","degree_level":"Open Access Master's Thesis","degree_discipline":"Department of Mechanical Engineering-Engineering Mechanics","degree_department":null,"school":null,"contributors":["Mahdi Shahbakhti"],"advisors":[],"committee_chairs":[],"committee_members":["Jeffrey Naber","Jeremy Worm"],"year":null,"date_issued":"","date_published":null,"updated_at":"2026-11-19T08:17:49Z","subjects":["RCCI Engines","Maximum Pressure Rise Rate","Model Predictive Control","Data Driven Modeling","Support Vector Machine","Combustion Phasing and Load Control","Automotive Engineering","Controls and Control Theory","Heat Transfer, Combustion"],"languages":[],"rights":[],"rights_urls":[],"identifier_entries":[{"key":"dc:identifier","label":"Identifier","values":["https://digitalcommons.mtu.edu/etdr/865"],"render_values":[{"text":"https://digitalcommons.mtu.edu/etdr/865","href":"https://digitalcommons.mtu.edu/etdr/865","code":true}]}],"person_identifier_entries":[]},"links":{"outbound_url":"https://doi.org/10.37099/mtu.dc.etdr/865","outbound_label":"DOI","outbound_source":"dc:identifier","record_url":"https://doi.org/10.37099/mtu.dc.etdr/865","record_label":"Repository record","record_kind":"doi","record_source":"dc:identifier","download_url":null,"download_label":null,"download_source":null,"access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://digitalcommons.mtu.edu/do/oai/?verb=GetRecord&metadataPrefix=oai_etdms&identifier=oai%3Adigitalcommons.mtu.edu%3Aetdr-2015","prefix":"oai_etdms"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor","label":"Contributor","values":["Mahdi Shahbakhti"]},{"key":"dc:contributor.committeemember","label":"Committee Member","values":["Jeffrey Naber","Jeremy Worm"]},{"key":"dc:creator","label":"Author","values":["Basina, Aditya"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.available","label":"Dc Date Available","values":["2020-08-12T07:00:00Z"]},{"key":"dc:date.created","label":"Dc Date Created","values":["2019-01-01T08:00:00Z"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Department of Mechanical Engineering-Engineering Mechanics"]},{"key":"thesis:degree_level","label":"Degree Level","values":["Open Access Master's Thesis"]},{"key":"thesis:degree_name","label":"Degree Name","values":["Master of Science in Mechanical Engineering (MS)"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["RCCI Engines","Maximum Pressure Rise Rate","Model Predictive Control","Data Driven Modeling","Support Vector Machine","Combustion Phasing and Load Control","Automotive Engineering","Controls and Control Theory","Heat Transfer, Combustion"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier","label":"Identifier","values":["10.37099/mtu.dc.etdr/865","https://digitalcommons.mtu.edu/etdr/865"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["Low Temperature Combustion (LTC) is a combustion strategy that burns fuel at lower temperatures and leaner mixtures in order to achieve high efficiency and near zero NOx emissions. Since the combustion happens at lower temperatures it inhibits the formation of NOx and soot emissions. One such strategy is Reactivity Controlled Compression Ignition (RCCI). One characteristic of RCCI combustion and LTC com- bustion in general is short burn durations which leads to high Pressure Rise Rates (PRR). This limits the operation of these engines to lower loads as at high loads, the Maximum Pressure Rise Rate (MPRR) hinders the use of this combustion strategy. This thesis focuses on the development of a model based controller that can control the Crank Angle for 50% mass fraction burn (CA50) and Indicated Mean Effective Pressure (IMEP) of an RCCI engine while limiting the MPRR to a pre determined limit. A Control Oriented Model (COM) is developed to predict the MPRR in an RCCI engine. This COM is then validated against experimental data. A statistical analysis of the experimental data is conducted to understand the accuracy of the COM. The results show that the COM is able to predict the MPRR with reasonable accuracy in steady state and transient conditions. Also, the COM is able to capture the trends during transient operation. This COM is then included in an existing cycle by cycle dynamic RCCI engine model and used to develop a Linear Parameter Varying (LPV) representation of an RCCI engine using Data Driven Modeling (DDM) approach with Support Vector Machines (SVM). This LPV representation is then used along with a Model Predictive Controller (MPC) to control the CA50 and IMEP of the RCCI engine model while limiting the MPRR. The controller was able to track the desired CA50 and IMEP with a mean error of 0.9 CAD and 4.7 KPa respectively while maintaining the MPRR below 5.8 bar/CAD."]},{"key":"dc:title","label":"Title","values":["Modeling and Control of Maximum Pressure Rise Rate in RCCI Engines"]}]}],"canonical_facts":{"dc:contributor":["Mahdi Shahbakhti"],"dc:contributor.committeemember":["Jeffrey Naber","Jeremy Worm"],"dc:creator":["Basina, Aditya"],"dc:date.available":["2020-08-12T07:00:00Z"],"dc:date.created":["2019-01-01T08:00:00Z"],"dc:description.abstract":["Low Temperature Combustion (LTC) is a combustion strategy that burns fuel at lower temperatures and leaner mixtures in order to achieve high efficiency and near zero NOx emissions. Since the combustion happens at lower temperatures it inhibits the formation of NOx and soot emissions. One such strategy is Reactivity Controlled Compression Ignition (RCCI). One characteristic of RCCI combustion and LTC com- bustion in general is short burn durations which leads to high Pressure Rise Rates (PRR). This limits the operation of these engines to lower loads as at high loads, the Maximum Pressure Rise Rate (MPRR) hinders the use of this combustion strategy. This thesis focuses on the development of a model based controller that can control the Crank Angle for 50% mass fraction burn (CA50) and Indicated Mean Effective Pressure (IMEP) of an RCCI engine while limiting the MPRR to a pre determined limit. A Control Oriented Model (COM) is developed to predict the MPRR in an RCCI engine. This COM is then validated against experimental data. A statistical analysis of the experimental data is conducted to understand the accuracy of the COM. The results show that the COM is able to predict the MPRR with reasonable accuracy in steady state and transient conditions. Also, the COM is able to capture the trends during transient operation. This COM is then included in an existing cycle by cycle dynamic RCCI engine model and used to develop a Linear Parameter Varying (LPV) representation of an RCCI engine using Data Driven Modeling (DDM) approach with Support Vector Machines (SVM). This LPV representation is then used along with a Model Predictive Controller (MPC) to control the CA50 and IMEP of the RCCI engine model while limiting the MPRR. The controller was able to track the desired CA50 and IMEP with a mean error of 0.9 CAD and 4.7 KPa respectively while maintaining the MPRR below 5.8 bar/CAD."],"dc:identifier":["10.37099/mtu.dc.etdr/865","https://digitalcommons.mtu.edu/etdr/865"],"dc:subject":["RCCI Engines","Maximum Pressure Rise Rate","Model Predictive Control","Data Driven Modeling","Support Vector Machine","Combustion Phasing and Load Control","Automotive Engineering","Controls and Control Theory","Heat Transfer, Combustion"],"dc:title":["Modeling and Control of Maximum Pressure Rise Rate in RCCI Engines"],"thesis:degree_discipline":["Department of Mechanical Engineering-Engineering Mechanics"],"thesis:degree_level":["Open Access Master's Thesis"],"thesis:degree_name":["Master of Science in Mechanical Engineering (MS)"]},"updated_at":"2026-11-19T08:17:49Z"}