{"id":{"repo_id":"mtu","oai_identifier":"oai:digitalcommons.mtu.edu:etdr-3107"},"canonical_url":"https://search.ndltd.org/etd/mtu/oai:digitalcommons.mtu.edu:etdr-3107","repository":{"repo_id":"mtu","name":"Michigan Technological University","base_url":"https://digitalcommons.mtu.edu/do/oai/"},"display":{"title":"ESTIMATING UNCONFINED COMPRESSIVE STRENGTH (UCS) OF ROCKS FROM MEASUREMENT WHILE DRILLING (MWD) DATA","abstract":"Measurement-while-drilling (MWD) technology enables the real-time monitoring of drilling parameters during the drilling process. MWD data can provide valuable insight into the mechanical behavior of intact rocks and rock masses, which is essential for geotechnical applications such as foundation design and underground construction. The aim of this study is to correlate real-time drilling parameters, recorded using a laboratory-developed MWD system, with the unconfined compressive strength (UCS) of rocks. A custom laboratory MWD system was designed to simultaneously record four key drilling parameters: thrust (axial force, crowd), torque, penetration rate, and rotational speed. The custom-built MWD system was used to continuously measure the drilling parameters while coring into five different materials, i.e., gypsum, sandstone, dolomite, basalt, and concrete. Core samples collected during these corings were then tested for UCS under both dry and water-saturated conditions. Two compound parameters, i.e., specific energy and drillability, were calculated from the raw MWD data and compared with UCS values. Both indices showed a good correlation with UCS, with specific energy providing slightly more accurate predictions. These results demonstrate the potential of laboratory-based MWD systems as practical tools for estimating rock strength in geotechnical investigations.","abstract_html":"Measurement-while-drilling (MWD) technology enables the real-time monitoring of drilling parameters during the drilling process. MWD data can provide valuable insight into the mechanical behavior of intact rocks and rock masses, which is essential for geotechnical applications such as foundation design and underground construction. The aim of this study is to correlate real-time drilling parameters, recorded using a laboratory-developed MWD system, with the unconfined compressive strength (UCS) of rocks. A custom laboratory MWD system was designed to simultaneously record four key drilling parameters: thrust (axial force, crowd), torque, penetration rate, and rotational speed. The custom-built MWD system was used to continuously measure the drilling parameters while coring into five different materials, i.e., gypsum, sandstone, dolomite, basalt, and concrete. Core samples collected during these corings were then tested for UCS under both dry and water-saturated conditions. Two compound parameters, i.e., specific energy and drillability, were calculated from the raw MWD data and compared with UCS values. Both indices showed a good correlation with UCS, with specific energy providing slightly more accurate predictions. These results demonstrate the potential of laboratory-based MWD systems as practical tools for estimating rock strength in geotechnical investigations.","abstract_has_math":false,"creators":["Erdem, Can"],"institution":null,"degree_name":"Master of Science in Civil Engineering (MS)","degree_level":"Open Access Master's Thesis","degree_discipline":"Department of Civil, Environmental, and Geospatial Engineering","degree_department":null,"school":null,"contributors":["Mohammadhossein Sadeghiamirshahidi"],"advisors":[],"committee_chairs":[],"committee_members":["Sai Sandeep Chitta","Xiang Li"],"year":null,"date_issued":"","date_published":null,"updated_at":"2026-11-19T08:19:20Z","subjects":["Measurement-while-drilling (MWD)","Unconfined compressive strength 25 (UCS)","Site investigation","Rock strength","Foundation design","Michigan formations","Civil and Environmental Engineering","Civil Engineering","Geological Engineering","Geotechnical Engineering"],"languages":[],"rights":[],"rights_urls":[],"identifier_entries":[{"key":"dc:identifier","label":"Identifier","values":["https://digitalcommons.mtu.edu/etdr/1968"],"render_values":[{"text":"https://digitalcommons.mtu.edu/etdr/1968","href":"https://digitalcommons.mtu.edu/etdr/1968","code":true}]}],"person_identifier_entries":[]},"links":{"outbound_url":"https://doi.org/10.37099/mtu.dc.etdr/1968","outbound_label":"DOI","outbound_source":"dc:identifier","record_url":"https://doi.org/10.37099/mtu.dc.etdr/1968","record_label":"Repository record","record_kind":"doi","record_source":"dc:identifier","download_url":null,"download_label":null,"download_source":null,"access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://digitalcommons.mtu.edu/do/oai/?verb=GetRecord&metadataPrefix=oai_etdms&identifier=oai%3Adigitalcommons.mtu.edu%3Aetdr-3107","prefix":"oai_etdms"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor","label":"Contributor","values":["Mohammadhossein Sadeghiamirshahidi"]},{"key":"dc:contributor.committeemember","label":"Committee Member","values":["Sai Sandeep Chitta","Xiang Li"]},{"key":"dc:creator","label":"Author","values":["Erdem, Can"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.available","label":"Dc Date Available","values":["2026-08-01T07:00:00Z"]},{"key":"dc:date.created","label":"Dc Date Created","values":["2025-01-01T08:00:00Z"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Department of Civil, Environmental, and Geospatial Engineering"]},{"key":"thesis:degree_level","label":"Degree Level","values":["Open Access Master's Thesis"]},{"key":"thesis:degree_name","label":"Degree Name","values":["Master of Science in Civil Engineering (MS)"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["Measurement-while-drilling (MWD)","Unconfined compressive strength 25 (UCS)","Site investigation","Rock strength","Foundation design","Michigan formations","Civil and Environmental Engineering","Civil Engineering","Geological Engineering","Geotechnical Engineering"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier","label":"Identifier","values":["10.37099/mtu.dc.etdr/1968","https://digitalcommons.mtu.edu/etdr/1968"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["Measurement-while-drilling (MWD) technology enables the real-time monitoring of drilling parameters during the drilling process. MWD data can provide valuable insight into the mechanical behavior of intact rocks and rock masses, which is essential for geotechnical applications such as foundation design and underground construction. The aim of this study is to correlate real-time drilling parameters, recorded using a laboratory-developed MWD system, with the unconfined compressive strength (UCS) of rocks. A custom laboratory MWD system was designed to simultaneously record four key drilling parameters: thrust (axial force, crowd), torque, penetration rate, and rotational speed. The custom-built MWD system was used to continuously measure the drilling parameters while coring into five different materials, i.e., gypsum, sandstone, dolomite, basalt, and concrete. Core samples collected during these corings were then tested for UCS under both dry and water-saturated conditions. Two compound parameters, i.e., specific energy and drillability, were calculated from the raw MWD data and compared with UCS values. Both indices showed a good correlation with UCS, with specific energy providing slightly more accurate predictions. These results demonstrate the potential of laboratory-based MWD systems as practical tools for estimating rock strength in geotechnical investigations."]},{"key":"dc:title","label":"Title","values":["ESTIMATING UNCONFINED COMPRESSIVE STRENGTH (UCS) OF ROCKS FROM MEASUREMENT WHILE DRILLING (MWD) DATA"]}]}],"canonical_facts":{"dc:contributor":["Mohammadhossein Sadeghiamirshahidi"],"dc:contributor.committeemember":["Sai Sandeep Chitta","Xiang Li"],"dc:creator":["Erdem, Can"],"dc:date.available":["2026-08-01T07:00:00Z"],"dc:date.created":["2025-01-01T08:00:00Z"],"dc:description.abstract":["Measurement-while-drilling (MWD) technology enables the real-time monitoring of drilling parameters during the drilling process. MWD data can provide valuable insight into the mechanical behavior of intact rocks and rock masses, which is essential for geotechnical applications such as foundation design and underground construction. The aim of this study is to correlate real-time drilling parameters, recorded using a laboratory-developed MWD system, with the unconfined compressive strength (UCS) of rocks. A custom laboratory MWD system was designed to simultaneously record four key drilling parameters: thrust (axial force, crowd), torque, penetration rate, and rotational speed. The custom-built MWD system was used to continuously measure the drilling parameters while coring into five different materials, i.e., gypsum, sandstone, dolomite, basalt, and concrete. Core samples collected during these corings were then tested for UCS under both dry and water-saturated conditions. Two compound parameters, i.e., specific energy and drillability, were calculated from the raw MWD data and compared with UCS values. Both indices showed a good correlation with UCS, with specific energy providing slightly more accurate predictions. These results demonstrate the potential of laboratory-based MWD systems as practical tools for estimating rock strength in geotechnical investigations."],"dc:identifier":["10.37099/mtu.dc.etdr/1968","https://digitalcommons.mtu.edu/etdr/1968"],"dc:subject":["Measurement-while-drilling (MWD)","Unconfined compressive strength 25 (UCS)","Site investigation","Rock strength","Foundation design","Michigan formations","Civil and Environmental Engineering","Civil Engineering","Geological Engineering","Geotechnical Engineering"],"dc:title":["ESTIMATING UNCONFINED COMPRESSIVE STRENGTH (UCS) OF ROCKS FROM MEASUREMENT WHILE DRILLING (MWD) DATA"],"thesis:degree_discipline":["Department of Civil, Environmental, and Geospatial Engineering"],"thesis:degree_level":["Open Access Master's Thesis"],"thesis:degree_name":["Master of Science in Civil Engineering (MS)"]},"updated_at":"2026-11-19T08:19:20Z"}