Back to results

NJIT

Optimization of a 3-micron BCCD process for high density CCD registers

Abstract

dc:description.abstract

<p>In July 1991, Dr. Walter F. Kosonocky proposed a High-Frame-Rate-CCD Imager. The design of the imager is such that the CCD channel width be 3-microns and capable of handling at least 3000 - 5000 electrons per square micron. Using process (SUPREM III) and device (PISCES IIB) simulations, charge handling capacities as a function of implant energy and junction depth were studied. Arsenic implants ranging from 100 to 200keV were driven-in to obtain junction depths between 0.40µm and 0.80µm. As a result of this work it was determined that charge handling capacities as high as 9400 electrons/µm<sup>2</sup> were achievable with implanted doses of 1.6E12 ions/cm<sup>2</sup>. This thesis is a description of the simulation and analysis techniques used to optimize the charge handhng capacity of a 31.1m wide BCCD channel.</p>

Degree

thesis:*
Name thesis:degree_name
Master of Science in Electrical Engineering - (M.S.)
Discipline thesis:degree_discipline
Electrical and Computer Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Ratner, Mark
Contributors dc:contributor
  • Walter F. Kosonocky
  • Kenneth Sohn
  • Durgamadhab Misra

Subjects

dc:subject × 3

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.njit.edu/theses/2337

Chain of custody

source
Harvested from
NJIT
Base URL
digitalcommons.njit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Ratner, Mark. Optimization of a 3-micron BCCD process for high density CCD registers. https://digitalcommons.njit.edu/theses/2337