{"id":{"repo_id":"rit","oai_identifier":"oai:repository.rit.edu:theses-9653"},"canonical_url":"https://search.ndltd.org/etd/rit/oai:repository.rit.edu:theses-9653","repository":{"repo_id":"rit","name":"Rochester Institute of Technology","base_url":"https://repository.rit.edu/do/oai/"},"display":{"title":"Investigation of Spherical Bearings for Use in the UltraForm Finishing Polishing Process","abstract":"UltraForm Finishing (UFF) is a production-level optical polishing process consisting of a moving belt that is pressed into an optical surface by a carrier wheel. The current configuration is comprised of a cylindrical carrier wheel attached to cylindrical roller bearings. As the optics market is moving towards aspheric geometry with smaller radii of curvature, geometric limitations associated with roller bearings requires the development of a modified approach to the UFF process. This thesis explores the feasibility of incorporating spherical fluid bearing elements in the UFF process as a replacement for roller bearings. Self-acting (or wedge film) and externally pressurized hydrostatic spherical fluid-film bearings were investigated for the UFF process. The self-acting bearing was modeled and analyzed using a previously developed hydrodynamic finite element computer program. The hydrostatic bearing was modeled using an analytical formulation of the Reynolds equation coupled with empirical data to account for entrance flow effects at the feed hole and to account for pressure drops in the bearing fluid supply system. Both bearing configurations predicted adequate fluid film thickness under steady load and speed. Performance tests on the UFF were completed with both bearing configurations under steady load and speed. Ball to cup seizure was observed with the self-acting configuration nearly immediately after initial load and speed application, with seizure presumably due to inadequate squeeze film resistance during the transient startup period. The hydrostatic bearing operated successfully over a wide range of applied loads and speeds employed in the current UFF process with minimal cup and ball wear. The feasibility of the hydrostatic spherical bearing element in the UFF process was subsequently demonstrated through the generation of repeatable and acceptable removal function maps which were then employed in the polishing of a planar optical surface.","abstract_html":"UltraForm Finishing (UFF) is a production-level optical polishing process consisting of a moving belt that is pressed into an optical surface by a carrier wheel. The current configuration is comprised of a cylindrical carrier wheel attached to cylindrical roller bearings. As the optics market is moving towards aspheric geometry with smaller radii of curvature, geometric limitations associated with roller bearings requires the development of a modified approach to the UFF process. This thesis explores the feasibility of incorporating spherical fluid bearing elements in the UFF process as a replacement for roller bearings. Self-acting (or wedge film) and externally pressurized hydrostatic spherical fluid-film bearings were investigated for the UFF process. The self-acting bearing was modeled and analyzed using a previously developed hydrodynamic finite element computer program. The hydrostatic bearing was modeled using an analytical formulation of the Reynolds equation coupled with empirical data to account for entrance flow effects at the feed hole and to account for pressure drops in the bearing fluid supply system. Both bearing configurations predicted adequate fluid film thickness under steady load and speed. Performance tests on the UFF were completed with both bearing configurations under steady load and speed. Ball to cup seizure was observed with the self-acting configuration nearly immediately after initial load and speed application, with seizure presumably due to inadequate squeeze film resistance during the transient startup period. The hydrostatic bearing operated successfully over a wide range of applied loads and speeds employed in the current UFF process with minimal cup and ball wear. The feasibility of the hydrostatic spherical bearing element in the UFF process was subsequently demonstrated through the generation of repeatable and acceptable removal function maps which were then employed in the polishing of a planar optical surface.","abstract_has_math":false,"creators":["DeFisher, Randall Scott, II"],"institution":null,"degree_name":"Mechanical Engineering (MS)","degree_level":"Thesis","degree_discipline":"Mechanical Engineering (KGCOE)","degree_department":null,"school":null,"contributors":["Stephen Boedo"],"advisors":[],"committee_chairs":[],"committee_members":[],"year":null,"date_issued":"","date_published":null,"updated_at":"2026-11-19T09:01:47Z","subjects":["Fluid bearing","Fluid mechanics","Optical polishing","OptiPro","Spherical bearing","UltraForm"],"languages":[],"rights":[],"rights_urls":[],"identifier_entries":[],"person_identifier_entries":[]},"links":{"outbound_url":"https://repository.rit.edu/theses/8498","outbound_label":"Repository record","outbound_source":"dc:identifier","record_url":"https://repository.rit.edu/theses/8498","record_label":"Repository record","record_kind":"record","record_source":"dc:identifier","download_url":null,"download_label":null,"download_source":null,"access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://repository.rit.edu/do/oai/?verb=GetRecord&metadataPrefix=oai_etdms&identifier=oai%3Arepository.rit.edu%3Atheses-9653","prefix":"oai_etdms"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor","label":"Contributor","values":["Stephen Boedo"]},{"key":"dc:creator","label":"Author","values":["DeFisher, Randall Scott, II"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.available","label":"Dc Date Available","values":["1970-01-01T11:39:45Z"]},{"key":"dc:date.created","label":"Dc Date Created","values":["2014-11-24T08:00:00Z"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Mechanical Engineering (KGCOE)"]},{"key":"thesis:degree_level","label":"Degree Level","values":["Thesis"]},{"key":"thesis:degree_name","label":"Degree Name","values":["Mechanical Engineering (MS)"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["Fluid bearing","Fluid mechanics","Optical polishing","OptiPro","Spherical bearing","UltraForm"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier","label":"Identifier","values":["https://repository.rit.edu/theses/8498"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["UltraForm Finishing (UFF) is a production-level optical polishing process consisting of a moving belt that is pressed into an optical surface by a carrier wheel. The current configuration is comprised of a cylindrical carrier wheel attached to cylindrical roller bearings. As the optics market is moving towards aspheric geometry with smaller radii of curvature, geometric limitations associated with roller bearings requires the development of a modified approach to the UFF process. This thesis explores the feasibility of incorporating spherical fluid bearing elements in the UFF process as a replacement for roller bearings. Self-acting (or wedge film) and externally pressurized hydrostatic spherical fluid-film bearings were investigated for the UFF process. The self-acting bearing was modeled and analyzed using a previously developed hydrodynamic finite element computer program. The hydrostatic bearing was modeled using an analytical formulation of the Reynolds equation coupled with empirical data to account for entrance flow effects at the feed hole and to account for pressure drops in the bearing fluid supply system. Both bearing configurations predicted adequate fluid film thickness under steady load and speed. Performance tests on the UFF were completed with both bearing configurations under steady load and speed. Ball to cup seizure was observed with the self-acting configuration nearly immediately after initial load and speed application, with seizure presumably due to inadequate squeeze film resistance during the transient startup period. The hydrostatic bearing operated successfully over a wide range of applied loads and speeds employed in the current UFF process with minimal cup and ball wear. The feasibility of the hydrostatic spherical bearing element in the UFF process was subsequently demonstrated through the generation of repeatable and acceptable removal function maps which were then employed in the polishing of a planar optical surface."]},{"key":"dc:description.note","label":"Dc Description Note","values":["<p>Physical copy available from RIT's Wallace Library at TJ1280 .D44 2014</p>"]},{"key":"dc:title","label":"Title","values":["Investigation of Spherical Bearings for Use in the UltraForm Finishing Polishing Process"]}]}],"canonical_facts":{"dc:contributor":["Stephen Boedo"],"dc:creator":["DeFisher, Randall Scott, II"],"dc:date.available":["1970-01-01T11:39:45Z"],"dc:date.created":["2014-11-24T08:00:00Z"],"dc:description.abstract":["UltraForm Finishing (UFF) is a production-level optical polishing process consisting of a moving belt that is pressed into an optical surface by a carrier wheel. The current configuration is comprised of a cylindrical carrier wheel attached to cylindrical roller bearings. As the optics market is moving towards aspheric geometry with smaller radii of curvature, geometric limitations associated with roller bearings requires the development of a modified approach to the UFF process. This thesis explores the feasibility of incorporating spherical fluid bearing elements in the UFF process as a replacement for roller bearings. Self-acting (or wedge film) and externally pressurized hydrostatic spherical fluid-film bearings were investigated for the UFF process. The self-acting bearing was modeled and analyzed using a previously developed hydrodynamic finite element computer program. The hydrostatic bearing was modeled using an analytical formulation of the Reynolds equation coupled with empirical data to account for entrance flow effects at the feed hole and to account for pressure drops in the bearing fluid supply system. Both bearing configurations predicted adequate fluid film thickness under steady load and speed. Performance tests on the UFF were completed with both bearing configurations under steady load and speed. Ball to cup seizure was observed with the self-acting configuration nearly immediately after initial load and speed application, with seizure presumably due to inadequate squeeze film resistance during the transient startup period. The hydrostatic bearing operated successfully over a wide range of applied loads and speeds employed in the current UFF process with minimal cup and ball wear. The feasibility of the hydrostatic spherical bearing element in the UFF process was subsequently demonstrated through the generation of repeatable and acceptable removal function maps which were then employed in the polishing of a planar optical surface."],"dc:description.note":["<p>Physical copy available from RIT's Wallace Library at TJ1280 .D44 2014</p>"],"dc:identifier":["https://repository.rit.edu/theses/8498"],"dc:subject":["Fluid bearing","Fluid mechanics","Optical polishing","OptiPro","Spherical bearing","UltraForm"],"dc:title":["Investigation of Spherical Bearings for Use in the UltraForm Finishing Polishing Process"],"thesis:degree_discipline":["Mechanical Engineering (KGCOE)"],"thesis:degree_level":["Thesis"],"thesis:degree_name":["Mechanical Engineering (MS)"]},"updated_at":"2026-11-19T09:01:47Z"}