{"id":{"repo_id":"rowan","oai_identifier":"oai:rdw.rowan.edu:etd-4572"},"canonical_url":"https://search.ndltd.org/etd/rowan/oai:rdw.rowan.edu:etd-4572","repository":{"repo_id":"rowan","name":"Rowan University","base_url":"https://rdw.rowan.edu/do/oai/"},"display":{"title":"IDENTIFYING FAILURE BEHAVIORS IN STEREOLITHOGRAPHY FROM VARIED PRINT ORIENTATIONS","abstract":"Stereolithography (SLA) is an additive manufacturing (AM) technique that utilizes photopolymerization to create three-dimensional shapes by strategically printing layers of material. Printing parameters such as layer orientation, print resolution and post cure can affect a specimen’s homogeneity, longevity and mechanical characteristics. Because of this variability, print parameters must be carefully considered when designing products and print processes for desired components, as manufacturers often fail to include all relevant print settings when advertising mechanical properties. For this study, 130 SLA-printed specimens were created with 100-micron print layer thickness and print orientations varying between 0 and 90, including intermediate orientations, to observe failure behavior and potential trends in ultimate tensile stress and ductility (as defined by deformation beyond ultimate stress). Specimens were designed and tested according to ASTM D638-14 standards, and printed using FormlabsTM Grey V4, White V4 and Tough resins. Specimens printed with print layers parallel to the applied tensile load were found to be 6.53 MPa (13.8%) stronger on average than those printed with print layers perpendicular to the applied tensile load. Most test specimens with print orientation parallel to the tensile stress exhibited ductile failures. However, as the orientation tends toward print layers that are perpendicular to the tensile loads, the specimens become more likely to exhibit brittle behavior at failure.","abstract_html":"Stereolithography (SLA) is an additive manufacturing (AM) technique that utilizes photopolymerization to create three-dimensional shapes by strategically printing layers of material. Printing parameters such as layer orientation, print resolution and post cure can affect a specimen’s homogeneity, longevity and mechanical characteristics. Because of this variability, print parameters must be carefully considered when designing products and print processes for desired components, as manufacturers often fail to include all relevant print settings when advertising mechanical properties. For this study, 130 SLA-printed specimens were created with 100-micron print layer thickness and print orientations varying between 0 and 90, including intermediate orientations, to observe failure behavior and potential trends in ultimate tensile stress and ductility (as defined by deformation beyond ultimate stress). Specimens were designed and tested according to ASTM D638-14 standards, and printed using FormlabsTM Grey V4, White V4 and Tough resins. Specimens printed with print layers parallel to the applied tensile load were found to be 6.53 MPa (13.8%) stronger on average than those printed with print layers perpendicular to the applied tensile load. Most test specimens with print orientation parallel to the tensile stress exhibited ductile failures. However, as the orientation tends toward print layers that are perpendicular to the tensile loads, the specimens become more likely to exhibit brittle behavior at failure.","abstract_has_math":false,"creators":["Veltre, Kevin"],"institution":null,"degree_name":"M.S. Civil Engineering","degree_level":"Thesis","degree_discipline":"Civil and Environmental Engineering","degree_department":null,"school":null,"contributors":["William T. Riddell, Ph.D.","Joseph F. Stanzione, III, Ph.D.","Francis M. Haas, Ph.D."],"advisors":[],"committee_chairs":[],"committee_members":[],"year":null,"date_issued":"","date_published":null,"updated_at":"2026-11-19T09:00:08Z","subjects":["Additive Manufacturing;Engineering;Materials Science;Orientations;Polymers;Stereolithography","Civil and Environmental Engineering","Civil Engineering","Engineering"],"languages":[],"rights":[],"rights_urls":[],"identifier_entries":[],"person_identifier_entries":[]},"links":{"outbound_url":"https://rdw.rowan.edu/etd/3566","outbound_label":"Repository record","outbound_source":"dc:identifier","record_url":"https://rdw.rowan.edu/etd/3566","record_label":"Repository record","record_kind":"record","record_source":"dc:identifier","download_url":null,"download_label":null,"download_source":null,"access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://rdw.rowan.edu/do/oai/?verb=GetRecord&metadataPrefix=oai_etdms&identifier=oai%3Ardw.rowan.edu%3Aetd-4572","prefix":"oai_etdms"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor","label":"Contributor","values":["William T. Riddell, Ph.D.","Joseph F. Stanzione, III, Ph.D.","Francis M. Haas, Ph.D."]},{"key":"dc:creator","label":"Author","values":["Veltre, Kevin"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.available","label":"Dc Date Available","values":["2026-07-20T07:00:00Z"]},{"key":"dc:date.created","label":"Dc Date Created","values":["2026-07-20T07:00:00Z"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Civil and Environmental Engineering"]},{"key":"thesis:degree_level","label":"Degree Level","values":["Thesis"]},{"key":"thesis:degree_name","label":"Degree Name","values":["M.S. Civil Engineering"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["Additive Manufacturing;Engineering;Materials Science;Orientations;Polymers;Stereolithography","Civil and Environmental Engineering","Civil Engineering","Engineering"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier","label":"Identifier","values":["https://rdw.rowan.edu/etd/3566"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["Stereolithography (SLA) is an additive manufacturing (AM) technique that utilizes photopolymerization to create three-dimensional shapes by strategically printing layers of material. Printing parameters such as layer orientation, print resolution and post cure can affect a specimen’s homogeneity, longevity and mechanical characteristics. Because of this variability, print parameters must be carefully considered when designing products and print processes for desired components, as manufacturers often fail to include all relevant print settings when advertising mechanical properties. For this study, 130 SLA-printed specimens were created with 100-micron print layer thickness and print orientations varying between 0 and 90, including intermediate orientations, to observe failure behavior and potential trends in ultimate tensile stress and ductility (as defined by deformation beyond ultimate stress). Specimens were designed and tested according to ASTM D638-14 standards, and printed using FormlabsTM Grey V4, White V4 and Tough resins. Specimens printed with print layers parallel to the applied tensile load were found to be 6.53 MPa (13.8%) stronger on average than those printed with print layers perpendicular to the applied tensile load. Most test specimens with print orientation parallel to the tensile stress exhibited ductile failures. However, as the orientation tends toward print layers that are perpendicular to the tensile loads, the specimens become more likely to exhibit brittle behavior at failure."]},{"key":"dc:title","label":"Title","values":["IDENTIFYING FAILURE BEHAVIORS IN STEREOLITHOGRAPHY FROM VARIED PRINT ORIENTATIONS"]}]}],"canonical_facts":{"dc:contributor":["William T. Riddell, Ph.D.","Joseph F. Stanzione, III, Ph.D.","Francis M. Haas, Ph.D."],"dc:creator":["Veltre, Kevin"],"dc:date.available":["2026-07-20T07:00:00Z"],"dc:date.created":["2026-07-20T07:00:00Z"],"dc:description.abstract":["Stereolithography (SLA) is an additive manufacturing (AM) technique that utilizes photopolymerization to create three-dimensional shapes by strategically printing layers of material. Printing parameters such as layer orientation, print resolution and post cure can affect a specimen’s homogeneity, longevity and mechanical characteristics. Because of this variability, print parameters must be carefully considered when designing products and print processes for desired components, as manufacturers often fail to include all relevant print settings when advertising mechanical properties. For this study, 130 SLA-printed specimens were created with 100-micron print layer thickness and print orientations varying between 0 and 90, including intermediate orientations, to observe failure behavior and potential trends in ultimate tensile stress and ductility (as defined by deformation beyond ultimate stress). Specimens were designed and tested according to ASTM D638-14 standards, and printed using FormlabsTM Grey V4, White V4 and Tough resins. Specimens printed with print layers parallel to the applied tensile load were found to be 6.53 MPa (13.8%) stronger on average than those printed with print layers perpendicular to the applied tensile load. Most test specimens with print orientation parallel to the tensile stress exhibited ductile failures. However, as the orientation tends toward print layers that are perpendicular to the tensile loads, the specimens become more likely to exhibit brittle behavior at failure."],"dc:identifier":["https://rdw.rowan.edu/etd/3566"],"dc:subject":["Additive Manufacturing;Engineering;Materials Science;Orientations;Polymers;Stereolithography","Civil and Environmental Engineering","Civil Engineering","Engineering"],"dc:title":["IDENTIFYING FAILURE BEHAVIORS IN STEREOLITHOGRAPHY FROM VARIED PRINT ORIENTATIONS"],"thesis:degree_discipline":["Civil and Environmental Engineering"],"thesis:degree_level":["Thesis"],"thesis:degree_name":["M.S. Civil Engineering"]},"updated_at":"2026-11-19T09:00:08Z"}