{"id":{"repo_id":"sdstate","oai_identifier":"oai:openprairie.sdstate.edu:etd-2616"},"canonical_url":"https://search.ndltd.org/etd/sdstate/oai:openprairie.sdstate.edu:etd-2616","repository":{"repo_id":"sdstate","name":"South Dakota State University","base_url":"https://openprairie.sdstate.edu/do/oai/"},"display":{"title":"Modeling of Dye Sensitized Solar Cells Based on Trap-assisted Interfacial Charge Transfer","abstract":"Dye Sensitized Solar Cells (DSSCs) have attracted much attention as a potential alternative to conventional solar cells due to its simple fabrication methods, low material cost, high absorption coefficient, flexibility, light weight etc. However, the low conversion efficiency of DSSC is hindering its commercialization. The loss mechanisms associated with the performance of the cells, which lead to low power conversion efficiency are not clearly understood and quantified in dye sensitized solar cells. Thus, there is a need for a charge transport model that relates the performance characteristics of DSSC to the material and device parameters and provides guidance to experimentalists regarding the performance limiting factors in a real device. The objective of this research was to develop a robust charge transport model for DSSC that incorporates the internal physical processes in charge transport and lead to a quantifiable understanding of loss mechanisms. A charge transfer model was developed that incorporated electron capture/emission and oxidation/reduction processes mediated by the deep level interfacial trap states. The charge transport was modeled through the formulation of electron conservation law in the nanoporous TiO2 network for both steady state and time dependent conditions. Newton Raphson method was used to solve the charge transport model which was a 1D nonlinear second order differential equation. The photovoltaic characteristics of the DSSCs such as external quantum efficiency (EQE) and dark and illuminated IV, were simulated and the performance characteristics such as open circuit voltage, short circuit current and activation energy were obtained for the devices. The model was validated through a series of measurements on fabricated DSSCs. The activation energy of charge transport derived from temperature dependent dark IV characteristics for simulated and experimental DSSCs were 0.93 eV and 0.9 eV respectively. The Simulation concluded that in cells with low interface quality, interface treatment leads to enhance Jsc and Voc, while in high quality DSSCs, interface treatments lead to enhanced Voc and device efficiency. Good agreement between the measurement and simulation results confirms that the dominating charge transport pathway in DSSCs is the trap-assisted interfacial charge transfer at TiO2/dye/electrolyte interface.","abstract_html":"Dye Sensitized Solar Cells (DSSCs) have attracted much attention as a potential alternative to conventional solar cells due to its simple fabrication methods, low material cost, high absorption coefficient, flexibility, light weight etc. However, the low conversion efficiency of DSSC is hindering its commercialization. The loss mechanisms associated with the performance of the cells, which lead to low power conversion efficiency are not clearly understood and quantified in dye sensitized solar cells. Thus, there is a need for a charge transport model that relates the performance characteristics of DSSC to the material and device parameters and provides guidance to experimentalists regarding the performance limiting factors in a real device. The objective of this research was to develop a robust charge transport model for DSSC that incorporates the internal physical processes in charge transport and lead to a quantifiable understanding of loss mechanisms. A charge transfer model was developed that incorporated electron capture/emission and oxidation/reduction processes mediated by the deep level interfacial trap states. The charge transport was modeled through the formulation of electron conservation law in the nanoporous TiO2 network for both steady state and time dependent conditions. Newton Raphson method was used to solve the charge transport model which was a 1D nonlinear second order differential equation. The photovoltaic characteristics of the DSSCs such as external quantum efficiency (EQE) and dark and illuminated IV, were simulated and the performance characteristics such as open circuit voltage, short circuit current and activation energy were obtained for the devices. The model was validated through a series of measurements on fabricated DSSCs. The activation energy of charge transport derived from temperature dependent dark IV characteristics for simulated and experimental DSSCs were 0.93 eV and 0.9 eV respectively. The Simulation concluded that in cells with low interface quality, interface treatment leads to enhance Jsc and Voc, while in high quality DSSCs, interface treatments lead to enhanced Voc and device efficiency. Good agreement between the measurement and simulation results confirms that the dominating charge transport pathway in DSSCs is the trap-assisted interfacial charge transfer at TiO2/dye/electrolyte interface.","abstract_has_math":false,"creators":["Nepal, Jeevan"],"institution":null,"degree_name":"Master of Science (MS)","degree_level":"Thesis - University Access Only","degree_discipline":"Electrical Engineering and Computer Science","degree_department":null,"school":null,"contributors":["Mahdi Farrokh Baroughi","David Galipeau"],"advisors":[],"committee_chairs":[],"committee_members":[],"year":null,"date_issued":"","date_published":null,"updated_at":"2026-11-19T08:57:57Z","subjects":["Electrical and Computer Engineering"],"languages":["en"],"rights":["<p>In Copyright - Educational Use Permitted<br /><a href=\"http://rightsstatements.org/vocab/InC-EDU/1.0/\">http://rightsstatements.org/vocab/InC-EDU/1.0/</a></p>"],"rights_urls":[],"identifier_entries":[],"person_identifier_entries":[]},"links":{"outbound_url":"https://openprairie.sdstate.edu/etd/1620","outbound_label":"Repository record","outbound_source":"dc:identifier","record_url":"https://openprairie.sdstate.edu/etd/1620","record_label":"Repository record","record_kind":"record","record_source":"dc:identifier","download_url":null,"download_label":null,"download_source":null,"access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://openprairie.sdstate.edu/do/oai/?verb=GetRecord&metadataPrefix=oai_etdms&identifier=oai%3Aopenprairie.sdstate.edu%3Aetd-2616","prefix":"oai_etdms"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor","label":"Contributor","values":["Mahdi Farrokh Baroughi","David Galipeau"]},{"key":"dc:creator","label":"Author","values":["Nepal, Jeevan"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.available","label":"Dc Date Available","values":["2017-08-16T07:00:00Z"]},{"key":"dc:date.created","label":"Dc Date Created","values":["2013-01-01T08:00:00Z"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Electrical Engineering and Computer Science"]},{"key":"thesis:degree_level","label":"Degree Level","values":["Thesis - University Access Only"]},{"key":"thesis:degree_name","label":"Degree Name","values":["Master of Science (MS)"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["Electrical and Computer Engineering"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language","label":"Dc Language","values":["en"]},{"key":"dc:rights","label":"Dc Rights","values":["<p>In Copyright - Educational Use Permitted<br /><a href=\"http://rightsstatements.org/vocab/InC-EDU/1.0/\">http://rightsstatements.org/vocab/InC-EDU/1.0/</a></p>"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier","label":"Identifier","values":["https://openprairie.sdstate.edu/etd/1620"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["Dye Sensitized Solar Cells (DSSCs) have attracted much attention as a potential alternative to conventional solar cells due to its simple fabrication methods, low material cost, high absorption coefficient, flexibility, light weight etc. However, the low conversion efficiency of DSSC is hindering its commercialization. The loss mechanisms associated with the performance of the cells, which lead to low power conversion efficiency are not clearly understood and quantified in dye sensitized solar cells. Thus, there is a need for a charge transport model that relates the performance characteristics of DSSC to the material and device parameters and provides guidance to experimentalists regarding the performance limiting factors in a real device. The objective of this research was to develop a robust charge transport model for DSSC that incorporates the internal physical processes in charge transport and lead to a quantifiable understanding of loss mechanisms. A charge transfer model was developed that incorporated electron capture/emission and oxidation/reduction processes mediated by the deep level interfacial trap states. The charge transport was modeled through the formulation of electron conservation law in the nanoporous TiO2 network for both steady state and time dependent conditions. Newton Raphson method was used to solve the charge transport model which was a 1D nonlinear second order differential equation. The photovoltaic characteristics of the DSSCs such as external quantum efficiency (EQE) and dark and illuminated IV, were simulated and the performance characteristics such as open circuit voltage, short circuit current and activation energy were obtained for the devices. The model was validated through a series of measurements on fabricated DSSCs. The activation energy of charge transport derived from temperature dependent dark IV characteristics for simulated and experimental DSSCs were 0.93 eV and 0.9 eV respectively. The Simulation concluded that in cells with low interface quality, interface treatment leads to enhance Jsc and Voc, while in high quality DSSCs, interface treatments lead to enhanced Voc and device efficiency. Good agreement between the measurement and simulation results confirms that the dominating charge transport pathway in DSSCs is the trap-assisted interfacial charge transfer at TiO2/dye/electrolyte interface."]},{"key":"dc:title","label":"Title","values":["Modeling of Dye Sensitized Solar Cells Based on Trap-assisted Interfacial Charge Transfer"]}]}],"canonical_facts":{"dc:contributor":["Mahdi Farrokh Baroughi","David Galipeau"],"dc:creator":["Nepal, Jeevan"],"dc:date.available":["2017-08-16T07:00:00Z"],"dc:date.created":["2013-01-01T08:00:00Z"],"dc:description.abstract":["Dye Sensitized Solar Cells (DSSCs) have attracted much attention as a potential alternative to conventional solar cells due to its simple fabrication methods, low material cost, high absorption coefficient, flexibility, light weight etc. However, the low conversion efficiency of DSSC is hindering its commercialization. The loss mechanisms associated with the performance of the cells, which lead to low power conversion efficiency are not clearly understood and quantified in dye sensitized solar cells. Thus, there is a need for a charge transport model that relates the performance characteristics of DSSC to the material and device parameters and provides guidance to experimentalists regarding the performance limiting factors in a real device. The objective of this research was to develop a robust charge transport model for DSSC that incorporates the internal physical processes in charge transport and lead to a quantifiable understanding of loss mechanisms. A charge transfer model was developed that incorporated electron capture/emission and oxidation/reduction processes mediated by the deep level interfacial trap states. The charge transport was modeled through the formulation of electron conservation law in the nanoporous TiO2 network for both steady state and time dependent conditions. Newton Raphson method was used to solve the charge transport model which was a 1D nonlinear second order differential equation. The photovoltaic characteristics of the DSSCs such as external quantum efficiency (EQE) and dark and illuminated IV, were simulated and the performance characteristics such as open circuit voltage, short circuit current and activation energy were obtained for the devices. The model was validated through a series of measurements on fabricated DSSCs. The activation energy of charge transport derived from temperature dependent dark IV characteristics for simulated and experimental DSSCs were 0.93 eV and 0.9 eV respectively. The Simulation concluded that in cells with low interface quality, interface treatment leads to enhance Jsc and Voc, while in high quality DSSCs, interface treatments lead to enhanced Voc and device efficiency. Good agreement between the measurement and simulation results confirms that the dominating charge transport pathway in DSSCs is the trap-assisted interfacial charge transfer at TiO2/dye/electrolyte interface."],"dc:identifier":["https://openprairie.sdstate.edu/etd/1620"],"dc:language":["en"],"dc:rights":["<p>In Copyright - Educational Use Permitted<br /><a href=\"http://rightsstatements.org/vocab/InC-EDU/1.0/\">http://rightsstatements.org/vocab/InC-EDU/1.0/</a></p>"],"dc:subject":["Electrical and Computer Engineering"],"dc:title":["Modeling of Dye Sensitized Solar Cells Based on Trap-assisted Interfacial Charge Transfer"],"thesis:degree_discipline":["Electrical Engineering and Computer Science"],"thesis:degree_level":["Thesis - University Access Only"],"thesis:degree_name":["Master of Science (MS)"]},"updated_at":"2026-11-19T08:57:57Z"}