{"id":{"repo_id":"sdstate","oai_identifier":"oai:openprairie.sdstate.edu:etd-3134"},"canonical_url":"https://search.ndltd.org/etd/sdstate/oai:openprairie.sdstate.edu:etd-3134","repository":{"repo_id":"sdstate","name":"South Dakota State University","base_url":"https://openprairie.sdstate.edu/do/oai/"},"display":{"title":"Production of Hydrocarbons by Catalytic Upgrading of Bio-oil from Microwave-assisted Pyrolysis of Biomass","abstract":"This dissertation investigated the microwave-assisted pyrolysis of several biomass feedstocks to produce bio-oils and catalytic upgraded these bio-oils into hydrocarbons with various zeolite catalysts. In the evaluation and optimization of the microwave-assisted pyrolysis, three biomass feedstocks were examined: switchgrass (SG), prairie cordgrass (PCG) and Ponderosa pine wood (PPW). Response surface methodology (RSM) was used for optimizations of the production of pyrolysis products. Optimal conditions for bio-oil yields from SG, PCG and PPW were found at the same condition: reaction temperature of 650 °C and residence time of 18 min. The maximum bio-oil yields of the three biomass feedstocks were 36.3%, 33.1% and 45.6%, respectively. The effectiveness of reaction temperature, residence time, and particle size on the yield of bio-oil and volatiles was evaluated. Prediction models were satisfactorily developed to describe the bio-oil conversion yield as a function of reaction temperature and time for SG, PCG and PPW. Results showed that both reaction temperature and residence time were significant factors affecting the production of bio-oils whereas the particle size was found to be insignificant on the microwave-assisted pyrolysis of switchgrass for bio-oil production. GC-MS analysis indicated that the bio-oil produced from various biomass feedstocks contained a series of important and useful chemical compounds: phenols, aliphatic hydrocarbons, aromatic hydrocarbons, and furan derivatives. The effectiveness of HZSM-5 and HS-Mix as zeolite thermal cracking catalysts for the production of hydrocarbons from raw bio-oils was investigated. HS-mix catalysts were produced by physically mixing HZSM-5 with silica-alumina with different HZSM-5/silica-alumina ratios and then characterized. Upgraded bio-oils were analyzed and characterized by composition analysis (using GC-MS), pH analysis, water content, viscosity, density and elemental analysis. The results of GC-MS tests showed that most components in the upgraded bio-oils were hydrocarbons mainly composed of 1,2-dimethyl-Benzene, p-Xylene, 1,2,3-trimethyl-Benzene, 1,2,4- trimethyl-Benzene, 1,3-butadienly-Benzene, 1-ethylidene-1H-Indene, and 1-methyl- Naphthalene. After zeolite cracking, the water content, viscosity and density of bio-oils decreased whereas the pH value increased. Elemental analysis indicated all the oxygen content levels of the bio-oils derived from pyrolysis of SG, PCG, and PPW decreased after zeolite catalytic cracking. Energy balance revealed that the energy recovery efficiencies were reasonable (45.1%-52.8%).","abstract_html":"This dissertation investigated the microwave-assisted pyrolysis of several biomass feedstocks to produce bio-oils and catalytic upgraded these bio-oils into hydrocarbons with various zeolite catalysts. In the evaluation and optimization of the microwave-assisted pyrolysis, three biomass feedstocks were examined: switchgrass (SG), prairie cordgrass (PCG) and Ponderosa pine wood (PPW). Response surface methodology (RSM) was used for optimizations of the production of pyrolysis products. Optimal conditions for bio-oil yields from SG, PCG and PPW were found at the same condition: reaction temperature of 650 °C and residence time of 18 min. The maximum bio-oil yields of the three biomass feedstocks were 36.3%, 33.1% and 45.6%, respectively. The effectiveness of reaction temperature, residence time, and particle size on the yield of bio-oil and volatiles was evaluated. Prediction models were satisfactorily developed to describe the bio-oil conversion yield as a function of reaction temperature and time for SG, PCG and PPW. Results showed that both reaction temperature and residence time were significant factors affecting the production of bio-oils whereas the particle size was found to be insignificant on the microwave-assisted pyrolysis of switchgrass for bio-oil production. GC-MS analysis indicated that the bio-oil produced from various biomass feedstocks contained a series of important and useful chemical compounds: phenols, aliphatic hydrocarbons, aromatic hydrocarbons, and furan derivatives. The effectiveness of HZSM-5 and HS-Mix as zeolite thermal cracking catalysts for the production of hydrocarbons from raw bio-oils was investigated. HS-mix catalysts were produced by physically mixing HZSM-5 with silica-alumina with different HZSM-5/silica-alumina ratios and then characterized. Upgraded bio-oils were analyzed and characterized by composition analysis (using GC-MS), pH analysis, water content, viscosity, density and elemental analysis. The results of GC-MS tests showed that most components in the upgraded bio-oils were hydrocarbons mainly composed of 1,2-dimethyl-Benzene, p-Xylene, 1,2,3-trimethyl-Benzene, 1,2,4- trimethyl-Benzene, 1,3-butadienly-Benzene, 1-ethylidene-1H-Indene, and 1-methyl- Naphthalene. After zeolite cracking, the water content, viscosity and density of bio-oils decreased whereas the pH value increased. Elemental analysis indicated all the oxygen content levels of the bio-oils derived from pyrolysis of SG, PCG, and PPW decreased after zeolite catalytic cracking. Energy balance revealed that the energy recovery efficiencies were reasonable (45.1%-52.8%).","abstract_has_math":false,"creators":["Zhou, Rui"],"institution":null,"degree_name":"Doctor of Philosophy (PhD)","degree_level":"Dissertation - University Access Only","degree_discipline":"Agricultural and Biosystems Engineering","degree_department":null,"school":null,"contributors":["James L. Julson"],"advisors":[],"committee_chairs":[],"committee_members":[],"year":null,"date_issued":"","date_published":null,"updated_at":"2026-11-19T08:58:27Z","subjects":[],"languages":["en"],"rights":["<p>In Copyright - Non-Commercial Use Permitted<br /><a href=\"http://rightsstatements.org/vocab/InC-NC/1.0/\">http://rightsstatements.org/vocab/InC-NC/1.0/</a></p>"],"rights_urls":[],"identifier_entries":[],"person_identifier_entries":[]},"links":{"outbound_url":"https://openprairie.sdstate.edu/etd/2072","outbound_label":"Repository record","outbound_source":"dc:identifier","record_url":"https://openprairie.sdstate.edu/etd/2072","record_label":"Repository record","record_kind":"record","record_source":"dc:identifier","download_url":null,"download_label":null,"download_source":null,"access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://openprairie.sdstate.edu/do/oai/?verb=GetRecord&metadataPrefix=oai_etdms&identifier=oai%3Aopenprairie.sdstate.edu%3Aetd-3134","prefix":"oai_etdms"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor","label":"Contributor","values":["James L. Julson"]},{"key":"dc:creator","label":"Author","values":["Zhou, Rui"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.available","label":"Dc Date Available","values":["2017-12-04T08:00:00Z"]},{"key":"dc:date.created","label":"Dc Date Created","values":["2014-01-01T08:00:00Z"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Agricultural and Biosystems Engineering"]},{"key":"thesis:degree_level","label":"Degree Level","values":["Dissertation - University Access Only"]},{"key":"thesis:degree_name","label":"Degree Name","values":["Doctor of Philosophy (PhD)"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language","label":"Dc Language","values":["en"]},{"key":"dc:rights","label":"Dc Rights","values":["<p>In Copyright - Non-Commercial Use Permitted<br /><a href=\"http://rightsstatements.org/vocab/InC-NC/1.0/\">http://rightsstatements.org/vocab/InC-NC/1.0/</a></p>"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier","label":"Identifier","values":["https://openprairie.sdstate.edu/etd/2072"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["This dissertation investigated the microwave-assisted pyrolysis of several biomass feedstocks to produce bio-oils and catalytic upgraded these bio-oils into hydrocarbons with various zeolite catalysts. In the evaluation and optimization of the microwave-assisted pyrolysis, three biomass feedstocks were examined: switchgrass (SG), prairie cordgrass (PCG) and Ponderosa pine wood (PPW). Response surface methodology (RSM) was used for optimizations of the production of pyrolysis products. Optimal conditions for bio-oil yields from SG, PCG and PPW were found at the same condition: reaction temperature of 650 °C and residence time of 18 min. The maximum bio-oil yields of the three biomass feedstocks were 36.3%, 33.1% and 45.6%, respectively. The effectiveness of reaction temperature, residence time, and particle size on the yield of bio-oil and volatiles was evaluated. Prediction models were satisfactorily developed to describe the bio-oil conversion yield as a function of reaction temperature and time for SG, PCG and PPW. Results showed that both reaction temperature and residence time were significant factors affecting the production of bio-oils whereas the particle size was found to be insignificant on the microwave-assisted pyrolysis of switchgrass for bio-oil production. GC-MS analysis indicated that the bio-oil produced from various biomass feedstocks contained a series of important and useful chemical compounds: phenols, aliphatic hydrocarbons, aromatic hydrocarbons, and furan derivatives. The effectiveness of HZSM-5 and HS-Mix as zeolite thermal cracking catalysts for the production of hydrocarbons from raw bio-oils was investigated. HS-mix catalysts were produced by physically mixing HZSM-5 with silica-alumina with different HZSM-5/silica-alumina ratios and then characterized. Upgraded bio-oils were analyzed and characterized by composition analysis (using GC-MS), pH analysis, water content, viscosity, density and elemental analysis. The results of GC-MS tests showed that most components in the upgraded bio-oils were hydrocarbons mainly composed of 1,2-dimethyl-Benzene, p-Xylene, 1,2,3-trimethyl-Benzene, 1,2,4- trimethyl-Benzene, 1,3-butadienly-Benzene, 1-ethylidene-1H-Indene, and 1-methyl- Naphthalene. After zeolite cracking, the water content, viscosity and density of bio-oils decreased whereas the pH value increased. Elemental analysis indicated all the oxygen content levels of the bio-oils derived from pyrolysis of SG, PCG, and PPW decreased after zeolite catalytic cracking. Energy balance revealed that the energy recovery efficiencies were reasonable (45.1%-52.8%)."]},{"key":"dc:title","label":"Title","values":["Production of Hydrocarbons by Catalytic Upgrading of Bio-oil from Microwave-assisted Pyrolysis of Biomass"]}]}],"canonical_facts":{"dc:contributor":["James L. Julson"],"dc:creator":["Zhou, Rui"],"dc:date.available":["2017-12-04T08:00:00Z"],"dc:date.created":["2014-01-01T08:00:00Z"],"dc:description.abstract":["This dissertation investigated the microwave-assisted pyrolysis of several biomass feedstocks to produce bio-oils and catalytic upgraded these bio-oils into hydrocarbons with various zeolite catalysts. In the evaluation and optimization of the microwave-assisted pyrolysis, three biomass feedstocks were examined: switchgrass (SG), prairie cordgrass (PCG) and Ponderosa pine wood (PPW). Response surface methodology (RSM) was used for optimizations of the production of pyrolysis products. Optimal conditions for bio-oil yields from SG, PCG and PPW were found at the same condition: reaction temperature of 650 °C and residence time of 18 min. The maximum bio-oil yields of the three biomass feedstocks were 36.3%, 33.1% and 45.6%, respectively. The effectiveness of reaction temperature, residence time, and particle size on the yield of bio-oil and volatiles was evaluated. Prediction models were satisfactorily developed to describe the bio-oil conversion yield as a function of reaction temperature and time for SG, PCG and PPW. Results showed that both reaction temperature and residence time were significant factors affecting the production of bio-oils whereas the particle size was found to be insignificant on the microwave-assisted pyrolysis of switchgrass for bio-oil production. GC-MS analysis indicated that the bio-oil produced from various biomass feedstocks contained a series of important and useful chemical compounds: phenols, aliphatic hydrocarbons, aromatic hydrocarbons, and furan derivatives. The effectiveness of HZSM-5 and HS-Mix as zeolite thermal cracking catalysts for the production of hydrocarbons from raw bio-oils was investigated. HS-mix catalysts were produced by physically mixing HZSM-5 with silica-alumina with different HZSM-5/silica-alumina ratios and then characterized. Upgraded bio-oils were analyzed and characterized by composition analysis (using GC-MS), pH analysis, water content, viscosity, density and elemental analysis. The results of GC-MS tests showed that most components in the upgraded bio-oils were hydrocarbons mainly composed of 1,2-dimethyl-Benzene, p-Xylene, 1,2,3-trimethyl-Benzene, 1,2,4- trimethyl-Benzene, 1,3-butadienly-Benzene, 1-ethylidene-1H-Indene, and 1-methyl- Naphthalene. After zeolite cracking, the water content, viscosity and density of bio-oils decreased whereas the pH value increased. Elemental analysis indicated all the oxygen content levels of the bio-oils derived from pyrolysis of SG, PCG, and PPW decreased after zeolite catalytic cracking. Energy balance revealed that the energy recovery efficiencies were reasonable (45.1%-52.8%)."],"dc:identifier":["https://openprairie.sdstate.edu/etd/2072"],"dc:language":["en"],"dc:rights":["<p>In Copyright - Non-Commercial Use Permitted<br /><a href=\"http://rightsstatements.org/vocab/InC-NC/1.0/\">http://rightsstatements.org/vocab/InC-NC/1.0/</a></p>"],"dc:title":["Production of Hydrocarbons by Catalytic Upgrading of Bio-oil from Microwave-assisted Pyrolysis of Biomass"],"thesis:degree_discipline":["Agricultural and Biosystems Engineering"],"thesis:degree_level":["Dissertation - University Access Only"],"thesis:degree_name":["Doctor of Philosophy (PhD)"]},"updated_at":"2026-11-19T08:58:27Z"}