{"id":{"repo_id":"sdstate","oai_identifier":"oai:openprairie.sdstate.edu:etd-6490"},"canonical_url":"https://search.ndltd.org/etd/sdstate/oai:openprairie.sdstate.edu:etd-6490","repository":{"repo_id":"sdstate","name":"South Dakota State University","base_url":"https://openprairie.sdstate.edu/do/oai/"},"display":{"title":"A New Method to Investigate the Effects of Force on Root Growth","abstract":"An instrument which will continuously monitor root growth rate and apply different axial forces at the root tip was designed and constructed. Corn seedlings were studied with this device. The axial root growth rate was significantly reduced when an axial force of ten grams was applied at the tip. Changes in root diameter were also determined. The ratio of final root diameter to initial root diameter increased with applied load at the root tip and then tended toward a constant value of approximately 1.4 at loads greater than eight grams. These changes occurred within the elongation zone. A ten gram load was found to reduce to 37 percent, and increase the root diameter ratio to 99 percent, of those at zero gram force. The corresponding pressure at ten gram load was 56.5 kPa. The maximum growth force and pressure values were much smaller than. those previously reported. A new root growth model was also proposed based on this study. The root diameter [sic] in the elongation zone increased or decreased with the change of the applied force at the root tip. The dimension of the meristematic zone and the root cap remained [sic] constant for different laods. [sic]","abstract_html":"An instrument which will continuously monitor root growth rate and apply different axial forces at the root tip was designed and constructed. Corn seedlings were studied with this device. The axial root growth rate was significantly reduced when an axial force of ten grams was applied at the tip. Changes in root diameter were also determined. The ratio of final root diameter to initial root diameter increased with applied load at the root tip and then tended toward a constant value of approximately 1.4 at loads greater than eight grams. These changes occurred within the elongation zone. A ten gram load was found to reduce to 37 percent, and increase the root diameter ratio to 99 percent, of those at zero gram force. The corresponding pressure at ten gram load was 56.5 kPa. The maximum growth force and pressure values were much smaller than. those previously reported. A new root growth model was also proposed based on this study. The root diameter [sic] in the elongation zone increased or decreased with the change of the applied force at the root tip. The dimension of the meristematic zone and the root cap remained [sic] constant for different laods. [sic]","abstract_has_math":false,"creators":["Zhu, Jiping"],"institution":null,"degree_name":"Master of Science (MS)","degree_level":"Thesis - University Access Only","degree_discipline":"Agricultural Engineering","degree_department":null,"school":null,"contributors":["Ralph Alcock"],"advisors":[],"committee_chairs":[],"committee_members":[],"year":null,"date_issued":"","date_published":null,"updated_at":"2026-11-19T09:02:24Z","subjects":["Agriculture","Engineering"],"languages":["English"],"rights":[],"rights_urls":[],"identifier_entries":[],"person_identifier_entries":[]},"links":{"outbound_url":"https://openprairie.sdstate.edu/etd/5451","outbound_label":"Repository record","outbound_source":"dc:identifier","record_url":"https://openprairie.sdstate.edu/etd/5451","record_label":"Repository record","record_kind":"record","record_source":"dc:identifier","download_url":null,"download_label":null,"download_source":null,"access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://openprairie.sdstate.edu/do/oai/?verb=GetRecord&metadataPrefix=oai_etdms&identifier=oai%3Aopenprairie.sdstate.edu%3Aetd-6490","prefix":"oai_etdms"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor","label":"Contributor","values":["Ralph Alcock"]},{"key":"dc:creator","label":"Author","values":["Zhu, Jiping"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.available","label":"Dc Date Available","values":["2021-06-17T07:00:00Z"]},{"key":"dc:date.created","label":"Dc Date Created","values":["1991-01-01T08:00:00Z"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Agricultural Engineering"]},{"key":"thesis:degree_level","label":"Degree Level","values":["Thesis - University Access Only"]},{"key":"thesis:degree_name","label":"Degree Name","values":["Master of Science (MS)"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["Agriculture","Engineering"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language","label":"Dc Language","values":["English"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier","label":"Identifier","values":["https://openprairie.sdstate.edu/etd/5451"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["An instrument which will continuously monitor root growth rate and apply different axial forces at the root tip was designed and constructed. Corn seedlings were studied with this device. The axial root growth rate was significantly reduced when an axial force of ten grams was applied at the tip. Changes in root diameter were also determined. The ratio of final root diameter to initial root diameter increased with applied load at the root tip and then tended toward a constant value of approximately 1.4 at loads greater than eight grams. These changes occurred within the elongation zone. A ten gram load was found to reduce to 37 percent, and increase the root diameter ratio to 99 percent, of those at zero gram force. The corresponding pressure at ten gram load was 56.5 kPa. The maximum growth force and pressure values were much smaller than. those previously reported. A new root growth model was also proposed based on this study. The root diameter [sic] in the elongation zone increased or decreased with the change of the applied force at the root tip. The dimension of the meristematic zone and the root cap remained [sic] constant for different laods. [sic]"]},{"key":"dc:title","label":"Title","values":["A New Method to Investigate the Effects of Force on Root Growth"]}]}],"canonical_facts":{"dc:contributor":["Ralph Alcock"],"dc:creator":["Zhu, Jiping"],"dc:date.available":["2021-06-17T07:00:00Z"],"dc:date.created":["1991-01-01T08:00:00Z"],"dc:description.abstract":["An instrument which will continuously monitor root growth rate and apply different axial forces at the root tip was designed and constructed. Corn seedlings were studied with this device. The axial root growth rate was significantly reduced when an axial force of ten grams was applied at the tip. Changes in root diameter were also determined. The ratio of final root diameter to initial root diameter increased with applied load at the root tip and then tended toward a constant value of approximately 1.4 at loads greater than eight grams. These changes occurred within the elongation zone. A ten gram load was found to reduce to 37 percent, and increase the root diameter ratio to 99 percent, of those at zero gram force. The corresponding pressure at ten gram load was 56.5 kPa. The maximum growth force and pressure values were much smaller than. those previously reported. A new root growth model was also proposed based on this study. The root diameter [sic] in the elongation zone increased or decreased with the change of the applied force at the root tip. The dimension of the meristematic zone and the root cap remained [sic] constant for different laods. [sic]"],"dc:identifier":["https://openprairie.sdstate.edu/etd/5451"],"dc:language":["English"],"dc:subject":["Agriculture","Engineering"],"dc:title":["A New Method to Investigate the Effects of Force on Root Growth"],"thesis:degree_discipline":["Agricultural Engineering"],"thesis:degree_level":["Thesis - University Access Only"],"thesis:degree_name":["Master of Science (MS)"]},"updated_at":"2026-11-19T09:02:24Z"}