{"id":{"repo_id":"soton","oai_identifier":"oai:eprints.soton.ac.uk:63243"},"canonical_url":"https://search.ndltd.org/etd/soton/oai:eprints.soton.ac.uk:63243","repository":{"repo_id":"soton","name":"University of Southampton","base_url":"https://eprints.soton.ac.uk/cgi/oai2"},"display":{"title":"Modelling approaches for the low-frequency analysis of built-up structures with non-deterministic properties","abstract":"Virtual simulations of the behaviour of mechanical systems are of widespread use in academia and industry. Mechanical structures are often analysed using the finite element method, where deterministic models with one particular set of physical parameters are employed. However, the underlying assumption that the input data is precisely known is in general not valid, because there are uncertainties about the parameters, often until the last stage of the design cycle and even when the product is in service. Furthermore, every manufacturing process naturally introduces some product variability, which is inevitable. These effects can be compensated for by the application of safety factors. However, with the increasing requirements towards product performance, the effects of non-deterministic properties are of growing concern and advanced methods are needed that properly take them into account. In this context, it is often more important to predict the variation in the response than attempt to further improve the accuracy of a deterministic model. A number of viable methods to take non-deterministic properties into account already exist, but their computational efficiency and applicability have to be increased. In this thesis, a framework for the non-deterministic analysis of built-up structures using component mode synthesis (CMS) is presented. It is shown how several coordinate systems in CMS can be used advantageously for the quantification and propagation of non-deterministic data. A specific approach, based on considering the variation in component natural frequencies only, is introduced and its efficiency and accuracy investigated. The application of perturbational relations for uncertainty propagation in CMS is discussed. The framework of CMS is also used to combine qualitatively different uncertain data and the inclusion of experimental data is addressed. Overall, CMS methods can be used to reduce the numerical costs, improve the applicability of the approaches and also gain some physical insight for a structural dynamic problem with non-deterministic properties. Furthermore, several contributions are made to simulation methods that are usually applied in connection with the CMS approach. Different concepts for non-deterministic modal superposition are presented, which can be used to estimate the variation in frequency response functions from uncertain modal data. The application of the Line-Sampling simulation method, as an advanced Monte Carlo approach, to structural dynamic problems is shown. Finally, the modelling of spatial variations in components using random fields and the implementation in existing finite element models are addressed. Numerical examples are presented throughout.","abstract_html":"Virtual simulations of the behaviour of mechanical systems are of widespread use in academia and industry. Mechanical structures are often analysed using the finite element method, where deterministic models with one particular set of physical parameters are employed. However, the underlying assumption that the input data is precisely known is in general not valid, because there are uncertainties about the parameters, often until the last stage of the design cycle and even when the product is in service. Furthermore, every manufacturing process naturally introduces some product variability, which is inevitable. These effects can be compensated for by the application of safety factors. However, with the increasing requirements towards product performance, the effects of non-deterministic properties are of growing concern and advanced methods are needed that properly take them into account. In this context, it is often more important to predict the variation in the response than attempt to further improve the accuracy of a deterministic model. A number of viable methods to take non-deterministic properties into account already exist, but their computational efficiency and applicability have to be increased. In this thesis, a framework for the non-deterministic analysis of built-up structures using component mode synthesis (CMS) is presented. It is shown how several coordinate systems in CMS can be used advantageously for the quantification and propagation of non-deterministic data. A specific approach, based on considering the variation in component natural frequencies only, is introduced and its efficiency and accuracy investigated. The application of perturbational relations for uncertainty propagation in CMS is discussed. The framework of CMS is also used to combine qualitatively different uncertain data and the inclusion of experimental data is addressed. Overall, CMS methods can be used to reduce the numerical costs, improve the applicability of the approaches and also gain some physical insight for a structural dynamic problem with non-deterministic properties. Furthermore, several contributions are made to simulation methods that are usually applied in connection with the CMS approach. Different concepts for non-deterministic modal superposition are presented, which can be used to estimate the variation in frequency response functions from uncertain modal data. The application of the Line-Sampling simulation method, as an advanced Monte Carlo approach, to structural dynamic problems is shown. Finally, the modelling of spatial variations in components using random fields and the implementation in existing finite element models are addressed. Numerical examples are presented throughout.","abstract_has_math":false,"creators":["Hinke, Lars"],"institution":"University of Southampton","degree_name":"Ph.D.","degree_level":"doctoral","degree_discipline":null,"degree_department":null,"school":null,"contributors":[],"advisors":["Mace, B.R."],"committee_chairs":[],"committee_members":[],"year":2008,"date_issued":"2008-04","date_published":"2008-04","updated_at":"2026-11-19T09:29:43Z","subjects":[],"languages":["eng"],"rights":[],"rights_urls":[],"identifier_entries":[],"person_identifier_entries":[]},"links":{"outbound_url":null,"outbound_label":null,"outbound_source":null,"record_url":null,"record_label":null,"record_kind":null,"record_source":null,"download_url":"https://eprints.soton.ac.uk/id/eprint/63243/1/P2479.pdf","download_label":"Download PDF","download_source":"dc:identifier.uri","access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://eprints.soton.ac.uk/cgi/oai2?verb=GetRecord&metadataPrefix=uketd_dc&identifier=oai%3Aeprints.soton.ac.uk%3A63243","prefix":"uketd_dc"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.advisor","label":"Advisor","values":["Mace, B.R."]},{"key":"dc:creator","label":"Author","values":["Hinke, Lars"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2008-04"]},{"key":"dc:date.issued","label":"Date","values":["2008-04"]},{"key":"dc:publisher.department","label":"Dc Publisher Department","values":["Dynamics Group (pre 2011 reorg)","Institute of Sound and Vibration Research"]},{"key":"dc:publisher.institution","label":"Dc Publisher Institution","values":["University of Southampton"]},{"key":"dc:relation.isreferencedby","label":"Dc Relation Isreferencedby","values":["https://eprints.soton.ac.uk/id/eprint/63243/"]},{"key":"dc:relation.references","label":"Dc Relation References","values":["[1] Fahy, F. J., “Statistical energy analysis : a wolf in sheep’s clothing?” Inter- Noise 93 , Leuven, 1993. [2] Kompella, M. and Bernhard, R. J., “Measurement of the statistical variation of structural-acoustic characteristics of automotive vehicles,” SAE Noise and Vibration Conference, 1993. [3] Hinke, L., Mace, B. R., and Waters, T. P., “Modelling uncertainty using nondeterministic modal superposition,” Ninth International Conference on Recent Advances in Structural Dynamics - RASD, Southampton, UK, 2006. [4] Hinke, L., Mace, B. R., and Waters, T. P., “Analysis of structures with uncertain parameters using component mode synthesis,” ISMA 2006 , Leuven, Belgium, 2006. [5] Hinke, L., Pichler, L., Pradlwarter, H. J., Mace, B. R., and Waters, T. P., “A random field model for a laminate windshield,” Ninth International Conference on Recent Advances in Structural Dynamics - RASD, Southampton, UK, 2006. [6] Hinke, L., Mace, B. R., and Ferguson, N. S., “Uncertainty quantification and CMS: free and fixed-interface methodologies,” International Modal Analysis Conference - IMAC XXV, Orlando, USA, 2007. [7] Hinke, L., Mace, B. R., and Waters, T. P., “Estimating response distributions of uncertain dynamical systems using Line-Sampling,” First International Conference on Uncertainty in Structural Dynamics USD, Sheffield, UK, 2007. [8] Hinke, L., Mace, B. R., and Waters, T. P., “Propagation of Uncertainty in Structural Dynamics Using Component Mode Synthesis Methods,” NATO Advanced Vehicle Technology Symposium on Computational Uncertainty in Military Vehicle Design, Athens, Greece, 2007. 178 [9] Petyt, M., Introduction to Finite Element Vibration Analysis, Cambridge University Press, 1990. [10] Bathe, K. J., Finite Element Procedures, Prentice-Hall, Englewood Cliffs, 1997. [11] Craig, R. R. J. and Kurdila, A. J., Fundamentals of Structural Dynamics, Wiley, 2006. [12] Chopra, A. K., Dynamics of Structures, Prentice-Hall, 2001. [13] Friswell, M. I. and Mottershead, J. E., Finite Element Model Updating in Structural Dynamics, Kluwer Academic Publishers, 1995. [14] Oberkampf, W., DeLand, S., Rutherford, B., Diegert, K., and Alvin, K., “A new methodology for the estimation of total uncertainty in computational simulation,” 40th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 1999. [15] Alvin, K., Oberkampf, W., Diegert, K., and Rutherford, B., “Uncertainty quantification in computational structural dynamics: a new paradigm for model validation,” 16th International Modal Analysis Conference IMAC XVI , 1998. [16] Langley, R. S., “Natural frequency statistics and universality,” ICSV12 , Lisbon, 2005. [17] Soize, C., “Random matrix theory and non-parametric model of random uncertainties in vibration analysis,” Journal of Sound and Vibration, Vol. 263, 2003, pp. 893–916. [18] Adhikari, S., “Matrix variate distributions for probabilistic structural dynamics,” AIAA Journal , Vol. 45, No. 7, 2007. [19] Soize, C., “A nonparametric model of random uncertainties for reduced matrix models in structural dynamics,” Probabilistic Engineering Mechanics, Vol. 15, 2000, pp. 277–294. [20] Soize, C., “A comprehensive overview of a non-parametric probabilistic approach of model uncertainties for predictive models in structural dynamics,” Journal of Sound and Vibration, Vol. 288, 2005, pp. 623–652. [21] Adhikari, S., “Uncertainty quantification and propagation using matrix variate distributions,” First International Conference on Uncertainty in Structural Dynamics USD, Sheffield, UK, 2007. [22] Hills, E., Mace, B. R., and Ferguson, N. S., “Response statistics of stochastic built-up structures,” ISMA, Leuven, 2004. [23] Hills, E., Mace, B. R., and Ferguson, N. S., “Response statistics of uncertain structures,” Inst. Acoustics Spring Conf , Southampton, 2004. [24] Brown, R. and Gear, J., “Dynamic variations within nominally identical product lines,” Tech. rep., University of Auckland, 1999. [25] Fahy, F. J. and Walker, J. G., Advanced Applications in Acoustics, Noise and Vibration, Spon Press, 2004. [26] Lyon, R. H. and DeJong, R. G., Theory and Application of Statistical Energy Analysis, Butterworth-Heinemann, Newton, MA, USA, 2nd ed., 1995. [27] Keane, A. J. and Price, W. G., Statistical Energy Analysis: An Overview with Applications in Structural Dynamics, Cambridge University Press, Cambridge, UK, 1997. [28] Shorter, P. J. and Langley, R. S., “Vibro-acoustic analysis of complex systems,” Journal of Sound and Vibration, Vol. 288, 2005, pp. 669–699. [29] Langley, R. S., Lande, R., Shorter, P. J., and Cotoni, V., “Hybrid deterministic-statistical modelling of built-up structures,” ICSV12 , Lisbon, 2005. [30] Moens, D., De Gersem, H., Desmet, W., and Vandepitte, D., “An overview of novel non-probabilistic approaches for non-deterministic dynamic analysis,” NOVEM, 2005. [31] Dong, W. M., Chiang, W. L., and Wong, F. S., “Propagation of uncertainties in deterministic systems,” Computers and Structures, Vol. 25, No. 3, 1987, pp. 415–423. [32] Dong, W. and Shah, H., “Vertex method for computing functions of fuzzy variables,” Fuzzy Sets and Systems, Vol. 24, 1987, pp. 65–78. [33] Manson, G., “Calculating frequency response functions for uncertain systems using complex affine analysis,” Journal of Sound and Vibration, Vol. 288, 2005, pp. 487–521. [34] Box, G. E. P., Hunter, W., and Hunter, U., Statistics for experiments, Series in Probability and Statistics, Wiley, 1978. [35] Zadeh, L., “Fuzzy sets,” Information and Control , Vol. 8, 1965, pp. 338–353. [36] M¨oller, B. and Beer, M., Fuzzy Randomness - Uncertainty in Civil Engineering and Computational Mechanics, Springer Verlag, Berlin, 2004. [37] Hanss, M., Applied Fuzzy Arithmetic, Springer, 2005. [38] Hanss, M., “The transformation method for the simulation and analysis of systems with uncertain parameters,” Fuzzy Sets and Systems, Vol. 130, 2002. [39] Schu¨eller, G. I., “Computational stochastic mechanics - recent advances,” Computers and Structures, Vol. 79, 2001, pp. 2225–2234. [40] Schu¨eller, G. I., “A state of-the-art report on computational stochastic mechanics,” Probabilistic Engineering Mechanics, Vol. 12, No. 4, 1997, pp. 197– 321. [41] Upton, G. and Cook, I., Dictionary of statistics, Oxford Paperback Reference, Oxford University Press, 2004. [42] Vanmarcke, E., Random fields: Analysis and Synthesis, The M.I.T. Press, 1983. [43] Ghanem, R. G. and Spanos, P. D., Stochastic Finite Elements: A Spectral Approach, Dover Publications, 2003. [44] Loeve, M., Probability Theory, Springer-Verlag, 1977. [45] Hammersley, J. M. and Handscomb, D. C., Monte Carlo Methods, Fletcher and Son Ltd., Norwich, 1967. [46] Rubinstein, R. Y., Simulation and the Monte Carlo Method, Wiley, New York, 1981. [47] Fishman, G. S., Monte Carlo: Concepts, algorithms, and applications, Springer Series in Operations Research, Springer-Verlag, Berlin, 1996. [48] Sachdeva, S. K., Nair, P. B., and Keane, A. J., “Comparative study of projection schemes for stochastic finite element analysis,” Comput. Methods Appl. Mech. Engrg., Vol. 195, 2006, pp. 2371–2392. [49] Nair, P. B. and Keane, A. J., “Stochastic reduced basis methods,” AIAA Journal , Vol. 40, No. 8, 2002. [50] Bae, H. R., Grandhi, R. V., and Canfield, R. A., “Uncertainty quantification of structural response using evidence theory,” 43rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Denver, Colorado, 2002. [51] Worden, K., Manson, G., and Denoeux, T., “Evidence-based damage classification for an aircraft structure,” First International Conference on Uncertainty in Structural Dynamics USD, Sheffield, UK, 2007. [52] Lucas, C. and Araabi, B. N., “Generalization of the Dempster-Shafer theory: a fuzzy-valued measure,” IEEE Transactions on Fuzzy Systems, Vol. 7, No. 3, 1999, pp. 255–270. [53] Schu¨eller, G. I., Pradlwarter, H. J., and Koutsourelakis, P. S., “A critical appraisal of reliability estimation procedures for high dimensions,” Probabilistic Engineering Mechanics, Vol. 19, 2004, pp. 463–474. [54] Au, S. K. and Beck, J. L., “Important sampling in high dimensions,” Journal of Structural Safety, Vol. 25, No. 2, 2003, pp. 139–163. [55] Nie, J. and Ellingwood, R., “Directional methods for structural reliability,” Journal of Structural Safety, Vol. 22, 2000, pp. 233. [56] Au, S. K. and Beck, J. L., “Estimation of small failure probabilities in high dimensions by subset simulation,” Probabilistic Engineering Mechanics, Vol. 16, 2001, pp. 263–277. [57] Koutsourelakis, P. S., Pradlwarter, H. J., and Schu¨eller, G. I., “Reliability of structures in high dimensions, part I: algorithms and applications,” Probabilistic Engineering Mechanics, Vol. 19, 2004, pp. 409–417. [58] McKay, M. D., Beckman, R. J., and Conover, W. J., “A comparision of three methods for selecting values of input variables in the analysis of output from a computer code,” Technometrics, Vol. 42, No. 1, 2000. [59] Moens, D. and Vandepitte, D., “Fuzzy finite element method for frequency response function analysis of uncertain structures,” AIAA Journal , Vol. 40, No. 1, 2002, pp. 126–136. [60] Guyan, R. J., “Reduction of stiffness and mass matrices,” AIAA Journal , Vol. 3, No. 2, 1965, pp. 380. [61] Craig, R. R., J. and Bampton, M., “Coupling of substructures for dynamic analysis,” AIAA Journal , Vol. 6, 1968, pp. 1313–1319. [62] Saltelli, A., Chan, K., and Scott, E. M., Sensitivity Analysis, Wiley, 2000. [63] Schu¨eller, G. I., Bucher, C. G., and Pradlwarter, H. J., “The response surface method - an efficient tool to determine the failure probability of large structural systems,” International Conference on Spacecraft Structures and Mechanical Testing, Noordwijk, The Netherlands, 1991. [64] Fox, R. L. and Kapoor, M. P., “Rate of change of eigenvalues and eigenvectors,” AIAA Journal , Vol. 6, No. 12, 1968, pp. 2426–2429. [65] Nelson, R. B., “Simplified calculation of eigenvector derivatives,” AIAA Journal , Vol. 14, No. 9, 1976. [66] Alvin, K. F., “Efficient computation of eigenvector sensitivities for structural dynamics,” AIAA Journal , Vol. 35, No. 11, 1997. [67] Adhikari, S. and Friswell, M. I., “Eigenderivative analysis of asymmetric nonconservative systems,” International Journal for Numerical Methods in Engineering, Vol. 51, 2001, pp. 709–733. [68] Mills-Curran, W. C., “Calculation of eigenvector derivatives for structures with repeated eigenvalues,” AIAA Journal , Vol. 26, No. 7, 1988, pp. 867 – 871. [69] Vessel, K., Ram, Y., and Pang, S.-S., “Sensitivity of repeated eigenvalues to perturbations,” AIAA Journal , Vol. 43, No. 3, 2005, pp. 582 – 5. [70] Adhikari, S., “Rates of change of eigenvalues and eigenvectors in damped dynamic system,” AIAA Journal , Vol. 39, No. 11, 1999. [71] Adhikari, S., “Derivative of eigensolutions of nonviscously damped linear systems,” AIAA Journal , Vol. 40, No. 10, 2002. [72] Bhaskar, A., “Gross modifications in structural dynamics via interpolated modes,” Seventh International Conference of Recent Advances in Structural Dynamics, Southampton, UK, 2000. [73] Bhaskar, A., Sahu, S. S., and Nakra, B. C., “Approximations and reanalysis over a parameter interval for dynamic design,” Journal of Sound and Vibration, Vol. 248, No. 1, 2001, pp. 178–186. [74] Brenner, C., Ein Beitrag zur Zuverl¨assigkeitsanalyse von Strukturen unter Ber¨ucksichtigung von Systemunsicherheiten mit Hilfe der Methode der Stochastischen Finiten Elemente, Ph.D. thesis, University of Innsbruck, 1995. [75] Charmpis, D. C. and Schu¨eller, G. I., “The need for linking micromechanics of materials with stochastic finite elements: a challenge for material science.” NSF Workshop ”Probability and Materials: From Nano- to Macro-Scale”, Baltimore, 2005. [76] Bah, M. T., Nair, P. B., Bhaskar, A., and Keane, A. J., “Stochastic component mode synthesis,” 44th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics, and Materials Conference, AIAA-2003-1750, Norfolk, 2003. [77] Sunar, M., “Encyclopedia of Vibration,” Vol. 3, Academic Press, 2002, pp. 1332–1335. [78] Bennighof, J. and Kim, C., “Adaptive multilevel substructuring method for efficient modeling of complex structures,” 33rd AIAA/ASME/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 1993. [79] Hurty, W. C., “Dynamic analysis of structural systems using component modes,” AIAA Journal , Vol. 3, 1965, pp. 678–685. [80] Craig, R. R., J. and Chang, C. J., “Free-interface methods of substructure coupling for dynamic analysis,” AIAA Journal , Vol. 14, 1976, pp. 1633–1635. [81] Craig, R. R., J., “Methods of component mode synthesis,” Shock and Vib. Digest , Vol. 9, 1977, pp. 3–10. [82] Craig, R. R., J., Structural Dynamics - An Introduction to Computer Methods, Wiley, 1981. [83] Meirovitch, L., Computational Methods in Structural Dynamics, Sijthoff and Noordhoff, Alphen aan der Rijn, Netherlands, 1980. [84] Hintz, R. B., “Analytical methods in component modal synthesis,” AIAA Journal , Vol. 13, No. 8, 1975, pp. 1007–1016. [85] Craig, R. R., J. and Chang, C. J., “On the use of attachment modes in substructure coupling for dynamic analysis,” AIAA/ASME 18th Struc., Struc. Dyn. and Materials Conf., San Diego, CA, 1977. [86] Craig, R. R., J., “A review of time-domain and frequency-domain component mode synthesis methods,” Journal of Modal Analysis, Vol. 2, No. 2, 1987, pp. 59–72. [87] Craig, R. R., J., “Substructure methods in vibration,” Transactions of ASME, 1995. [88] Craig, R. R., J. and Chang, C. J., “A review of substructure coupling methods for dynamic analysis,” NASA CP-2001, National Aeronautics and Space Admin., Washington, DC, 1976. [89] Castanier, M. P., Tan, Y. C., and Pierre, C., “Characteristic constraint modes for component mode synthesis,” AIAA Journal , Vol. 39, No. 6, 2001. [90] Tran, D. M., “Component mode synthesis methods using interface modes. Application to structures with cyclic symmetry.” Computers and Structures, Vol. 79, 2001, pp. 209–222. [91] Balmes, E., “Use of generalized interface degrees of freedom in component mode synthesis.” International Modal Analysis Conference - IMAC, 1996. [92] Cuppens, K., Sas, P., and Hermans, L., “Evaluation of the FRF based substructuring and modal synthesis technique applied to vehicle FE data,” ISMA 25 , Leuven, 2000. [93] Iankov, R., Moens, D., Sas, P., and Hermans, L., “Propagation of variances of FRFs through FRF-based coupling calculations,” ISMA, Leuven, 2002. [94] Lim, T. C. and Li, J., “A theoretical and computational study of the FRFbased substructuring technique applying enhanced least square and TSVD approaches.” Journal of Sound and Vibration, Vol. 231, No. 4, 2000, pp. 1135– 1157. [95] Mace, B. R. and Shorter, P. J., “A local modal/perturbational method for estimating frequency response statistics of built-up structures with uncertain properties,” Journal of Sound and Vibration, Vol. 5, No. 242, 2001, pp. 793– 811. [96] De Gersem, H., Moens, D., Desmet, W., and Vandepitte, D., “On the use of deviatoric component modes for the assessment of uncertainty in component mode synthesis.” First International Conference on Uncertainty in Structural Dynamics USD, Sheffield, UK, 2007. [97] Moens, D. and Vandepitte, D., “A fuzzy finite element procedure for the calculation of uncertain frequency response functions of damped structures: Part 1 - Procedure.” Journal of Sound and Vibration, Vol. 288, 2005, pp. 431– 462. [98] Ewins, D. J., Modal Testing - Theory, Practice and Applications, Second Edition, Research Studies Press Ltd., 2001. [99] Metropolis, N. and Ulam, S., “The Monte Carlo method,” Journal of the American Statistical Society, Vol. 44, 1949, pp. 335–41. [100] Schu¨eller, G. I. and Stix, R., “A critical appraisal of methods to determine failure probabilities,” Structural Safety, Vol. 4, 1987, pp. 293–309. [101] Pellissetti, M. F., Pradlwarter, H. J., and Schu¨eller, G. I., “Reliability analysis of large FE-systems using Line Sampling,” ICOSSAR 2005 , 2005. [102] Pradlwarter, H. J., Pellissetti, M. F., and Schu¨eller, G. I., “Sensitivity and uncertainty in complex FE-models,” ICOSSAR 2005 , 2005. [103] Scionti, M. and Lardeur, P., “Experimental and numerical study of the intra/ inter variability of an acoustic windscreen,” International Conference on Noise and Vibration - ISMA 2006 , Leuven, Belgium, 2006. [104] Scigliano, R., Scionti, M., and Lardeur, P., “Intra variability"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"dc:type.qualificationlevel","label":"Dc Type Qualificationlevel","values":["doctoral"]},{"key":"dc:type.qualificationname","label":"Dc Type Qualificationname","values":["Ph.D."]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.dcterms_iso639_2","label":"Language (ISO 639-2)","values":["eng"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["https://eprints.soton.ac.uk/id/eprint/63243/1/P2479.pdf"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["Virtual simulations of the behaviour of mechanical systems are of widespread use in academia and industry. Mechanical structures are often analysed using the finite element method, where deterministic models with one particular set of physical parameters are employed. However, the underlying assumption that the input data is precisely known is in general not valid, because there are uncertainties about the parameters, often until the last stage of the design cycle and even when the product is in service. Furthermore, every manufacturing process naturally introduces some product variability, which is inevitable. These effects can be compensated for by the application of safety factors. However, with the increasing requirements towards product performance, the effects of non-deterministic properties are of growing concern and advanced methods are needed that properly take them into account. In this context, it is often more important to predict the variation in the response than attempt to further improve the accuracy of a deterministic model. A number of viable methods to take non-deterministic properties into account already exist, but their computational efficiency and applicability have to be increased. In this thesis, a framework for the non-deterministic analysis of built-up structures using component mode synthesis (CMS) is presented. It is shown how several coordinate systems in CMS can be used advantageously for the quantification and propagation of non-deterministic data. A specific approach, based on considering the variation in component natural frequencies only, is introduced and its efficiency and accuracy investigated. The application of perturbational relations for uncertainty propagation in CMS is discussed. The framework of CMS is also used to combine qualitatively different uncertain data and the inclusion of experimental data is addressed. Overall, CMS methods can be used to reduce the numerical costs, improve the applicability of the approaches and also gain some physical insight for a structural dynamic problem with non-deterministic properties. Furthermore, several contributions are made to simulation methods that are usually applied in connection with the CMS approach. Different concepts for non-deterministic modal superposition are presented, which can be used to estimate the variation in frequency response functions from uncertain modal data. The application of the Line-Sampling simulation method, as an advanced Monte Carlo approach, to structural dynamic problems is shown. Finally, the modelling of spatial variations in components using random fields and the implementation in existing finite element models are addressed. Numerical examples are presented throughout."]},{"key":"dc:format","label":"Dc Format","values":["text"]},{"key":"dcterms:accessrights","label":"Dcterms Accessrights","values":["public"]},{"key":"dc:title","label":"Title","values":["Modelling approaches for the low-frequency analysis of built-up structures with non-deterministic properties"]}]}],"canonical_facts":{"dc:contributor.advisor":["Mace, B.R."],"dc:creator":["Hinke, Lars"],"dc:date":["2008-04"],"dc:date.issued":["2008-04"],"dc:description.abstract":["Virtual simulations of the behaviour of mechanical systems are of widespread use in academia and industry. Mechanical structures are often analysed using the finite element method, where deterministic models with one particular set of physical parameters are employed. However, the underlying assumption that the input data is precisely known is in general not valid, because there are uncertainties about the parameters, often until the last stage of the design cycle and even when the product is in service. Furthermore, every manufacturing process naturally introduces some product variability, which is inevitable. These effects can be compensated for by the application of safety factors. However, with the increasing requirements towards product performance, the effects of non-deterministic properties are of growing concern and advanced methods are needed that properly take them into account. In this context, it is often more important to predict the variation in the response than attempt to further improve the accuracy of a deterministic model. A number of viable methods to take non-deterministic properties into account already exist, but their computational efficiency and applicability have to be increased. In this thesis, a framework for the non-deterministic analysis of built-up structures using component mode synthesis (CMS) is presented. It is shown how several coordinate systems in CMS can be used advantageously for the quantification and propagation of non-deterministic data. A specific approach, based on considering the variation in component natural frequencies only, is introduced and its efficiency and accuracy investigated. The application of perturbational relations for uncertainty propagation in CMS is discussed. The framework of CMS is also used to combine qualitatively different uncertain data and the inclusion of experimental data is addressed. Overall, CMS methods can be used to reduce the numerical costs, improve the applicability of the approaches and also gain some physical insight for a structural dynamic problem with non-deterministic properties. Furthermore, several contributions are made to simulation methods that are usually applied in connection with the CMS approach. Different concepts for non-deterministic modal superposition are presented, which can be used to estimate the variation in frequency response functions from uncertain modal data. The application of the Line-Sampling simulation method, as an advanced Monte Carlo approach, to structural dynamic problems is shown. Finally, the modelling of spatial variations in components using random fields and the implementation in existing finite element models are addressed. Numerical examples are presented throughout."],"dc:format":["text"],"dc:identifier.uri":["https://eprints.soton.ac.uk/id/eprint/63243/1/P2479.pdf"],"dc:language.dcterms_iso639_2":["eng"],"dc:publisher.department":["Dynamics Group (pre 2011 reorg)","Institute of Sound and Vibration Research"],"dc:publisher.institution":["University of Southampton"],"dc:relation.isreferencedby":["https://eprints.soton.ac.uk/id/eprint/63243/"],"dc:relation.references":["[1] Fahy, F. J., “Statistical energy analysis : a wolf in sheep’s clothing?” Inter- Noise 93 , Leuven, 1993. [2] Kompella, M. and Bernhard, R. J., “Measurement of the statistical variation of structural-acoustic characteristics of automotive vehicles,” SAE Noise and Vibration Conference, 1993. [3] Hinke, L., Mace, B. R., and Waters, T. P., “Modelling uncertainty using nondeterministic modal superposition,” Ninth International Conference on Recent Advances in Structural Dynamics - RASD, Southampton, UK, 2006. [4] Hinke, L., Mace, B. R., and Waters, T. P., “Analysis of structures with uncertain parameters using component mode synthesis,” ISMA 2006 , Leuven, Belgium, 2006. [5] Hinke, L., Pichler, L., Pradlwarter, H. J., Mace, B. R., and Waters, T. P., “A random field model for a laminate windshield,” Ninth International Conference on Recent Advances in Structural Dynamics - RASD, Southampton, UK, 2006. [6] Hinke, L., Mace, B. R., and Ferguson, N. S., “Uncertainty quantification and CMS: free and fixed-interface methodologies,” International Modal Analysis Conference - IMAC XXV, Orlando, USA, 2007. [7] Hinke, L., Mace, B. R., and Waters, T. P., “Estimating response distributions of uncertain dynamical systems using Line-Sampling,” First International Conference on Uncertainty in Structural Dynamics USD, Sheffield, UK, 2007. [8] Hinke, L., Mace, B. R., and Waters, T. P., “Propagation of Uncertainty in Structural Dynamics Using Component Mode Synthesis Methods,” NATO Advanced Vehicle Technology Symposium on Computational Uncertainty in Military Vehicle Design, Athens, Greece, 2007. 178 [9] Petyt, M., Introduction to Finite Element Vibration Analysis, Cambridge University Press, 1990. [10] Bathe, K. J., Finite Element Procedures, Prentice-Hall, Englewood Cliffs, 1997. [11] Craig, R. R. J. and Kurdila, A. J., Fundamentals of Structural Dynamics, Wiley, 2006. [12] Chopra, A. K., Dynamics of Structures, Prentice-Hall, 2001. [13] Friswell, M. I. and Mottershead, J. E., Finite Element Model Updating in Structural Dynamics, Kluwer Academic Publishers, 1995. [14] Oberkampf, W., DeLand, S., Rutherford, B., Diegert, K., and Alvin, K., “A new methodology for the estimation of total uncertainty in computational simulation,” 40th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 1999. [15] Alvin, K., Oberkampf, W., Diegert, K., and Rutherford, B., “Uncertainty quantification in computational structural dynamics: a new paradigm for model validation,” 16th International Modal Analysis Conference IMAC XVI , 1998. [16] Langley, R. S., “Natural frequency statistics and universality,” ICSV12 , Lisbon, 2005. [17] Soize, C., “Random matrix theory and non-parametric model of random uncertainties in vibration analysis,” Journal of Sound and Vibration, Vol. 263, 2003, pp. 893–916. [18] Adhikari, S., “Matrix variate distributions for probabilistic structural dynamics,” AIAA Journal , Vol. 45, No. 7, 2007. [19] Soize, C., “A nonparametric model of random uncertainties for reduced matrix models in structural dynamics,” Probabilistic Engineering Mechanics, Vol. 15, 2000, pp. 277–294. [20] Soize, C., “A comprehensive overview of a non-parametric probabilistic approach of model uncertainties for predictive models in structural dynamics,” Journal of Sound and Vibration, Vol. 288, 2005, pp. 623–652. [21] Adhikari, S., “Uncertainty quantification and propagation using matrix variate distributions,” First International Conference on Uncertainty in Structural Dynamics USD, Sheffield, UK, 2007. [22] Hills, E., Mace, B. R., and Ferguson, N. S., “Response statistics of stochastic built-up structures,” ISMA, Leuven, 2004. [23] Hills, E., Mace, B. R., and Ferguson, N. S., “Response statistics of uncertain structures,” Inst. Acoustics Spring Conf , Southampton, 2004. [24] Brown, R. and Gear, J., “Dynamic variations within nominally identical product lines,” Tech. rep., University of Auckland, 1999. [25] Fahy, F. J. and Walker, J. G., Advanced Applications in Acoustics, Noise and Vibration, Spon Press, 2004. [26] Lyon, R. H. and DeJong, R. G., Theory and Application of Statistical Energy Analysis, Butterworth-Heinemann, Newton, MA, USA, 2nd ed., 1995. [27] Keane, A. J. and Price, W. G., Statistical Energy Analysis: An Overview with Applications in Structural Dynamics, Cambridge University Press, Cambridge, UK, 1997. [28] Shorter, P. J. and Langley, R. S., “Vibro-acoustic analysis of complex systems,” Journal of Sound and Vibration, Vol. 288, 2005, pp. 669–699. [29] Langley, R. S., Lande, R., Shorter, P. J., and Cotoni, V., “Hybrid deterministic-statistical modelling of built-up structures,” ICSV12 , Lisbon, 2005. [30] Moens, D., De Gersem, H., Desmet, W., and Vandepitte, D., “An overview of novel non-probabilistic approaches for non-deterministic dynamic analysis,” NOVEM, 2005. [31] Dong, W. M., Chiang, W. L., and Wong, F. S., “Propagation of uncertainties in deterministic systems,” Computers and Structures, Vol. 25, No. 3, 1987, pp. 415–423. [32] Dong, W. and Shah, H., “Vertex method for computing functions of fuzzy variables,” Fuzzy Sets and Systems, Vol. 24, 1987, pp. 65–78. [33] Manson, G., “Calculating frequency response functions for uncertain systems using complex affine analysis,” Journal of Sound and Vibration, Vol. 288, 2005, pp. 487–521. [34] Box, G. E. P., Hunter, W., and Hunter, U., Statistics for experiments, Series in Probability and Statistics, Wiley, 1978. [35] Zadeh, L., “Fuzzy sets,” Information and Control , Vol. 8, 1965, pp. 338–353. [36] M¨oller, B. and Beer, M., Fuzzy Randomness - Uncertainty in Civil Engineering and Computational Mechanics, Springer Verlag, Berlin, 2004. [37] Hanss, M., Applied Fuzzy Arithmetic, Springer, 2005. [38] Hanss, M., “The transformation method for the simulation and analysis of systems with uncertain parameters,” Fuzzy Sets and Systems, Vol. 130, 2002. [39] Schu¨eller, G. I., “Computational stochastic mechanics - recent advances,” Computers and Structures, Vol. 79, 2001, pp. 2225–2234. [40] Schu¨eller, G. I., “A state of-the-art report on computational stochastic mechanics,” Probabilistic Engineering Mechanics, Vol. 12, No. 4, 1997, pp. 197– 321. [41] Upton, G. and Cook, I., Dictionary of statistics, Oxford Paperback Reference, Oxford University Press, 2004. [42] Vanmarcke, E., Random fields: Analysis and Synthesis, The M.I.T. Press, 1983. [43] Ghanem, R. G. and Spanos, P. D., Stochastic Finite Elements: A Spectral Approach, Dover Publications, 2003. [44] Loeve, M., Probability Theory, Springer-Verlag, 1977. [45] Hammersley, J. M. and Handscomb, D. C., Monte Carlo Methods, Fletcher and Son Ltd., Norwich, 1967. [46] Rubinstein, R. Y., Simulation and the Monte Carlo Method, Wiley, New York, 1981. [47] Fishman, G. S., Monte Carlo: Concepts, algorithms, and applications, Springer Series in Operations Research, Springer-Verlag, Berlin, 1996. [48] Sachdeva, S. K., Nair, P. B., and Keane, A. J., “Comparative study of projection schemes for stochastic finite element analysis,” Comput. Methods Appl. Mech. Engrg., Vol. 195, 2006, pp. 2371–2392. [49] Nair, P. B. and Keane, A. J., “Stochastic reduced basis methods,” AIAA Journal , Vol. 40, No. 8, 2002. [50] Bae, H. R., Grandhi, R. V., and Canfield, R. A., “Uncertainty quantification of structural response using evidence theory,” 43rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Denver, Colorado, 2002. [51] Worden, K., Manson, G., and Denoeux, T., “Evidence-based damage classification for an aircraft structure,” First International Conference on Uncertainty in Structural Dynamics USD, Sheffield, UK, 2007. [52] Lucas, C. and Araabi, B. N., “Generalization of the Dempster-Shafer theory: a fuzzy-valued measure,” IEEE Transactions on Fuzzy Systems, Vol. 7, No. 3, 1999, pp. 255–270. [53] Schu¨eller, G. I., Pradlwarter, H. J., and Koutsourelakis, P. S., “A critical appraisal of reliability estimation procedures for high dimensions,” Probabilistic Engineering Mechanics, Vol. 19, 2004, pp. 463–474. [54] Au, S. K. and Beck, J. L., “Important sampling in high dimensions,” Journal of Structural Safety, Vol. 25, No. 2, 2003, pp. 139–163. [55] Nie, J. and Ellingwood, R., “Directional methods for structural reliability,” Journal of Structural Safety, Vol. 22, 2000, pp. 233. [56] Au, S. K. and Beck, J. L., “Estimation of small failure probabilities in high dimensions by subset simulation,” Probabilistic Engineering Mechanics, Vol. 16, 2001, pp. 263–277. [57] Koutsourelakis, P. S., Pradlwarter, H. J., and Schu¨eller, G. I., “Reliability of structures in high dimensions, part I: algorithms and applications,” Probabilistic Engineering Mechanics, Vol. 19, 2004, pp. 409–417. [58] McKay, M. D., Beckman, R. J., and Conover, W. J., “A comparision of three methods for selecting values of input variables in the analysis of output from a computer code,” Technometrics, Vol. 42, No. 1, 2000. [59] Moens, D. and Vandepitte, D., “Fuzzy finite element method for frequency response function analysis of uncertain structures,” AIAA Journal , Vol. 40, No. 1, 2002, pp. 126–136. [60] Guyan, R. J., “Reduction of stiffness and mass matrices,” AIAA Journal , Vol. 3, No. 2, 1965, pp. 380. [61] Craig, R. R., J. and Bampton, M., “Coupling of substructures for dynamic analysis,” AIAA Journal , Vol. 6, 1968, pp. 1313–1319. [62] Saltelli, A., Chan, K., and Scott, E. M., Sensitivity Analysis, Wiley, 2000. [63] Schu¨eller, G. I., Bucher, C. G., and Pradlwarter, H. J., “The response surface method - an efficient tool to determine the failure probability of large structural systems,” International Conference on Spacecraft Structures and Mechanical Testing, Noordwijk, The Netherlands, 1991. [64] Fox, R. L. and Kapoor, M. P., “Rate of change of eigenvalues and eigenvectors,” AIAA Journal , Vol. 6, No. 12, 1968, pp. 2426–2429. [65] Nelson, R. B., “Simplified calculation of eigenvector derivatives,” AIAA Journal , Vol. 14, No. 9, 1976. [66] Alvin, K. F., “Efficient computation of eigenvector sensitivities for structural dynamics,” AIAA Journal , Vol. 35, No. 11, 1997. [67] Adhikari, S. and Friswell, M. I., “Eigenderivative analysis of asymmetric nonconservative systems,” International Journal for Numerical Methods in Engineering, Vol. 51, 2001, pp. 709–733. [68] Mills-Curran, W. C., “Calculation of eigenvector derivatives for structures with repeated eigenvalues,” AIAA Journal , Vol. 26, No. 7, 1988, pp. 867 – 871. [69] Vessel, K., Ram, Y., and Pang, S.-S., “Sensitivity of repeated eigenvalues to perturbations,” AIAA Journal , Vol. 43, No. 3, 2005, pp. 582 – 5. [70] Adhikari, S., “Rates of change of eigenvalues and eigenvectors in damped dynamic system,” AIAA Journal , Vol. 39, No. 11, 1999. [71] Adhikari, S., “Derivative of eigensolutions of nonviscously damped linear systems,” AIAA Journal , Vol. 40, No. 10, 2002. [72] Bhaskar, A., “Gross modifications in structural dynamics via interpolated modes,” Seventh International Conference of Recent Advances in Structural Dynamics, Southampton, UK, 2000. [73] Bhaskar, A., Sahu, S. S., and Nakra, B. C., “Approximations and reanalysis over a parameter interval for dynamic design,” Journal of Sound and Vibration, Vol. 248, No. 1, 2001, pp. 178–186. [74] Brenner, C., Ein Beitrag zur Zuverl¨assigkeitsanalyse von Strukturen unter Ber¨ucksichtigung von Systemunsicherheiten mit Hilfe der Methode der Stochastischen Finiten Elemente, Ph.D. thesis, University of Innsbruck, 1995. [75] Charmpis, D. C. and Schu¨eller, G. I., “The need for linking micromechanics of materials with stochastic finite elements: a challenge for material science.” NSF Workshop ”Probability and Materials: From Nano- to Macro-Scale”, Baltimore, 2005. [76] Bah, M. T., Nair, P. B., Bhaskar, A., and Keane, A. J., “Stochastic component mode synthesis,” 44th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics, and Materials Conference, AIAA-2003-1750, Norfolk, 2003. [77] Sunar, M., “Encyclopedia of Vibration,” Vol. 3, Academic Press, 2002, pp. 1332–1335. [78] Bennighof, J. and Kim, C., “Adaptive multilevel substructuring method for efficient modeling of complex structures,” 33rd AIAA/ASME/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 1993. [79] Hurty, W. C., “Dynamic analysis of structural systems using component modes,” AIAA Journal , Vol. 3, 1965, pp. 678–685. [80] Craig, R. R., J. and Chang, C. J., “Free-interface methods of substructure coupling for dynamic analysis,” AIAA Journal , Vol. 14, 1976, pp. 1633–1635. [81] Craig, R. R., J., “Methods of component mode synthesis,” Shock and Vib. Digest , Vol. 9, 1977, pp. 3–10. [82] Craig, R. R., J., Structural Dynamics - An Introduction to Computer Methods, Wiley, 1981. [83] Meirovitch, L., Computational Methods in Structural Dynamics, Sijthoff and Noordhoff, Alphen aan der Rijn, Netherlands, 1980. [84] Hintz, R. B., “Analytical methods in component modal synthesis,” AIAA Journal , Vol. 13, No. 8, 1975, pp. 1007–1016. [85] Craig, R. R., J. and Chang, C. J., “On the use of attachment modes in substructure coupling for dynamic analysis,” AIAA/ASME 18th Struc., Struc. Dyn. and Materials Conf., San Diego, CA, 1977. [86] Craig, R. R., J., “A review of time-domain and frequency-domain component mode synthesis methods,” Journal of Modal Analysis, Vol. 2, No. 2, 1987, pp. 59–72. [87] Craig, R. R., J., “Substructure methods in vibration,” Transactions of ASME, 1995. [88] Craig, R. R., J. and Chang, C. J., “A review of substructure coupling methods for dynamic analysis,” NASA CP-2001, National Aeronautics and Space Admin., Washington, DC, 1976. [89] Castanier, M. P., Tan, Y. C., and Pierre, C., “Characteristic constraint modes for component mode synthesis,” AIAA Journal , Vol. 39, No. 6, 2001. [90] Tran, D. M., “Component mode synthesis methods using interface modes. Application to structures with cyclic symmetry.” Computers and Structures, Vol. 79, 2001, pp. 209–222. [91] Balmes, E., “Use of generalized interface degrees of freedom in component mode synthesis.” International Modal Analysis Conference - IMAC, 1996. [92] Cuppens, K., Sas, P., and Hermans, L., “Evaluation of the FRF based substructuring and modal synthesis technique applied to vehicle FE data,” ISMA 25 , Leuven, 2000. [93] Iankov, R., Moens, D., Sas, P., and Hermans, L., “Propagation of variances of FRFs through FRF-based coupling calculations,” ISMA, Leuven, 2002. [94] Lim, T. C. and Li, J., “A theoretical and computational study of the FRFbased substructuring technique applying enhanced least square and TSVD approaches.” Journal of Sound and Vibration, Vol. 231, No. 4, 2000, pp. 1135– 1157. [95] Mace, B. R. and Shorter, P. J., “A local modal/perturbational method for estimating frequency response statistics of built-up structures with uncertain properties,” Journal of Sound and Vibration, Vol. 5, No. 242, 2001, pp. 793– 811. [96] De Gersem, H., Moens, D., Desmet, W., and Vandepitte, D., “On the use of deviatoric component modes for the assessment of uncertainty in component mode synthesis.” First International Conference on Uncertainty in Structural Dynamics USD, Sheffield, UK, 2007. [97] Moens, D. and Vandepitte, D., “A fuzzy finite element procedure for the calculation of uncertain frequency response functions of damped structures: Part 1 - Procedure.” Journal of Sound and Vibration, Vol. 288, 2005, pp. 431– 462. [98] Ewins, D. J., Modal Testing - Theory, Practice and Applications, Second Edition, Research Studies Press Ltd., 2001. [99] Metropolis, N. and Ulam, S., “The Monte Carlo method,” Journal of the American Statistical Society, Vol. 44, 1949, pp. 335–41. [100] Schu¨eller, G. I. and Stix, R., “A critical appraisal of methods to determine failure probabilities,” Structural Safety, Vol. 4, 1987, pp. 293–309. [101] Pellissetti, M. F., Pradlwarter, H. J., and Schu¨eller, G. I., “Reliability analysis of large FE-systems using Line Sampling,” ICOSSAR 2005 , 2005. [102] Pradlwarter, H. J., Pellissetti, M. F., and Schu¨eller, G. I., “Sensitivity and uncertainty in complex FE-models,” ICOSSAR 2005 , 2005. [103] Scionti, M. and Lardeur, P., “Experimental and numerical study of the intra/ inter variability of an acoustic windscreen,” International Conference on Noise and Vibration - ISMA 2006 , Leuven, Belgium, 2006. [104] Scigliano, R., Scionti, M., and Lardeur, P., “Intra variability"],"dcterms:accessrights":["public"],"dc:title":["Modelling approaches for the low-frequency analysis of built-up structures with non-deterministic properties"],"dc:type":["Thesis"],"dc:type.qualificationlevel":["doctoral"],"dc:type.qualificationname":["Ph.D."]},"updated_at":"2026-11-19T09:29:43Z"}