{"id":{"repo_id":"unf","oai_identifier":"oai:digitalcommons.unf.edu:etd-2256"},"canonical_url":"https://search.ndltd.org/etd/unf/oai:digitalcommons.unf.edu:etd-2256","repository":{"repo_id":"unf","name":"University of North Florida","base_url":"https://digitalcommons.unf.edu/do/oai/"},"display":{"title":"Investigation of microstructurally dependent mechanical properties of cold sprayed copper using correlative microscopy","abstract":"This project employs multi-instrument materials characterization to analyze material made with the “Cold Spray” additive manufacturing process. Cold spray is an emerging additive manufacturing technique with unique benefits resulting from its low temperature adhesion process induced by plastic deformation. Metallic powder collides at high speeds creating three dimensional materials and coatings without the need for melting. Copper cold sprayed specimens were analyzed using a series of imaging techniques to characterize the microstructure at varying levels of detail and magnification. Scanning electron microscopy and electron back scattered diffraction were paired with microhardness testing to generate a correlative comparison between microstructure and physical properties of cold sprayed material. This research investigates how microhardness changes across the surface of highly deformed cold sprayed materials and the role inhomogeneous plastic deformation plays in level of microhardness. Both sprayed and transverse orientations were investigated providing a better understanding of the anisotropic mechanical properties created by the cold spray process. Results demonstrated that the cold sprayed microstructure exhibits an increase in microhardness with increasing levels of grain refinement in the sprayed orientation. This correlation was less apparent in the transverse orientation which reinforces the documented evidence that shows as-sprayed cold sprayed materials possess both anisotropic microstructure and properties.","abstract_html":"This project employs multi-instrument materials characterization to analyze material made with the “Cold Spray” additive manufacturing process. Cold spray is an emerging additive manufacturing technique with unique benefits resulting from its low temperature adhesion process induced by plastic deformation. Metallic powder collides at high speeds creating three dimensional materials and coatings without the need for melting. Copper cold sprayed specimens were analyzed using a series of imaging techniques to characterize the microstructure at varying levels of detail and magnification. Scanning electron microscopy and electron back scattered diffraction were paired with microhardness testing to generate a correlative comparison between microstructure and physical properties of cold sprayed material. This research investigates how microhardness changes across the surface of highly deformed cold sprayed materials and the role inhomogeneous plastic deformation plays in level of microhardness. Both sprayed and transverse orientations were investigated providing a better understanding of the anisotropic mechanical properties created by the cold spray process. Results demonstrated that the cold sprayed microstructure exhibits an increase in microhardness with increasing levels of grain refinement in the sprayed orientation. This correlation was less apparent in the transverse orientation which reinforces the documented evidence that shows as-sprayed cold sprayed materials possess both anisotropic microstructure and properties.","abstract_has_math":false,"creators":["Otto, Quintin","Otto, Quintin, 1995-"],"institution":"University of North Florida. School of Engineering","degree_name":"Master of Science in Mechanical Engineering (MSME)","degree_level":null,"degree_discipline":"Engineering","degree_department":null,"school":null,"contributors":["Dr. Paul Eason","Dr. Stephen Stagon","Dr. Grant Bevill"],"advisors":["Eason, Paul","Stagon, Stephen","Bevill, Grant"],"committee_chairs":[],"committee_members":[],"year":null,"date_issued":"Spring","date_published":"Spring","updated_at":"2026-11-18T20:04:21Z","subjects":["Thesis","University of North Florida","UNF","Dissertations, Academic -- UNF -- Master of Science in Mechanical Engineering","Dissertations, Academic -- UNF -- Engineering","Cold Spray","Bonding, Grain Refinement, Microhardness","Manufacturing","Metallurgy","Other Materials Science and Engineering","Structural Materials","Copper powder -- Microstructure -- Analysis -- Technological innovations; Metal powders -- Microstructure -- Analysis -- Technological innovations; Copper -- Additives -- Microstructure -- Analysis -- Technological innovations; Copper powder -- Mechanical properties -- Analysis -- Technological innovations; Metal powders -- Mechanical properties -- Analysis -- Technological innovations; Copper -- Additives -- Mechanical properties -- Analysis -- Technological innovations; Copper powder -- Hardenability; Metal powders -- Hardenability; Copper -- Additives -- Hardenability; Copper powder -- Microstructure -- Imaging -- Technological innovations; Metal powders -- Microstructure -- Imaging -- Technological innovations; Copper -- Additives -- Microstructure -- Imaging -- Technological innovations; Electron microscopy -- Technique -- Testing; Microscopy -- Technique -- Testing; Microscopes -- Industrial applications -- Testing; Electron microscopy -- Industrial applications -- Testing; Additive manufacturing -- Microscopy; Metal coating -- Research"],"languages":[],"rights":[],"rights_urls":["http://rightsstatements.org/vocab/InC/1.0/"],"identifier_entries":[],"person_identifier_entries":[]},"links":{"outbound_url":"https://digitalcommons.unf.edu/etd/1187","outbound_label":"Repository record","outbound_source":"dc:identifier","record_url":"https://digitalcommons.unf.edu/etd/1187","record_label":"Repository record","record_kind":"record","record_source":"dc:identifier","download_url":"https://digitalcommons.unf.edu/context/etd/article/2256/viewcontent/ETD1753PA.pdf","download_label":"Download PDF","download_source":"dc:identifier","access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://digitalcommons.unf.edu/do/oai/?verb=GetRecord&metadataPrefix=oai_etdms&identifier=oai%3Adigitalcommons.unf.edu%3Aetd-2256","prefix":"oai_etdms"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor","label":"Contributor","values":["Dr. Paul Eason","Dr. Stephen Stagon","Dr. Grant Bevill"]},{"key":"dc:contributor.advisor","label":"Advisor","values":["Eason, Paul","Stagon, Stephen","Bevill, Grant"]},{"key":"dc:creator","label":"Author","values":["Otto, Quintin","Otto, Quintin, 1995-"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.available","label":"Dc Date Available","values":["2023-05-17T07:00:00Z"]},{"key":"dc:date.created","label":"Dc Date Created","values":["2023-01-01T08:00:00Z"]},{"key":"dc:date.issued","label":"Date","values":["Spring"]},{"key":"dc:type","label":"Dc Type","values":["Master's Thesis"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Engineering"]},{"key":"thesis:degree_name","label":"Degree Name","values":["Master of Science in Mechanical Engineering (MSME)"]},{"key":"thesis:institution_name","label":"Thesis Institution Name","values":["University of North Florida. School of Engineering"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["Thesis","University of North Florida","UNF","Dissertations, Academic -- UNF -- Master of Science in Mechanical Engineering","Dissertations, Academic -- UNF -- Engineering","Cold Spray","Bonding, Grain Refinement, Microhardness","Manufacturing","Metallurgy","Other Materials Science and Engineering","Structural Materials"]},{"key":"dc:subject.lcsh","label":"Dc Subject Lcsh","values":["Copper powder -- Microstructure -- Analysis -- Technological innovations; Metal powders -- Microstructure -- Analysis -- Technological innovations; Copper -- Additives -- Microstructure -- Analysis -- Technological innovations; Copper powder -- Mechanical properties -- Analysis -- Technological innovations; Metal powders -- Mechanical properties -- Analysis -- Technological innovations; Copper -- Additives -- Mechanical properties -- Analysis -- Technological innovations; Copper powder -- Hardenability; Metal powders -- Hardenability; Copper -- Additives -- Hardenability; Copper powder -- Microstructure -- Imaging -- Technological innovations; Metal powders -- Microstructure -- Imaging -- Technological innovations; Copper -- Additives -- Microstructure -- Imaging -- Technological innovations; Electron microscopy -- Technique -- Testing; Microscopy -- Technique -- Testing; Microscopes -- Industrial applications -- Testing; Electron microscopy -- Industrial applications -- Testing; Additive manufacturing -- Microscopy; Metal coating -- Research"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:rights","label":"Dc Rights","values":["http://rightsstatements.org/vocab/InC/1.0/"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier","label":"Identifier","values":["https://digitalcommons.unf.edu/etd/1187","https://digitalcommons.unf.edu/context/etd/article/2256/viewcontent/ETD1753PA.pdf"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["This project employs multi-instrument materials characterization to analyze material made with the “Cold Spray” additive manufacturing process. Cold spray is an emerging additive manufacturing technique with unique benefits resulting from its low temperature adhesion process induced by plastic deformation. Metallic powder collides at high speeds creating three dimensional materials and coatings without the need for melting. Copper cold sprayed specimens were analyzed using a series of imaging techniques to characterize the microstructure at varying levels of detail and magnification. Scanning electron microscopy and electron back scattered diffraction were paired with microhardness testing to generate a correlative comparison between microstructure and physical properties of cold sprayed material. This research investigates how microhardness changes across the surface of highly deformed cold sprayed materials and the role inhomogeneous plastic deformation plays in level of microhardness. Both sprayed and transverse orientations were investigated providing a better understanding of the anisotropic mechanical properties created by the cold spray process. Results demonstrated that the cold sprayed microstructure exhibits an increase in microhardness with increasing levels of grain refinement in the sprayed orientation. This correlation was less apparent in the transverse orientation which reinforces the documented evidence that shows as-sprayed cold sprayed materials possess both anisotropic microstructure and properties."]},{"key":"dc:description.note","label":"Dc Description Note","values":["ProQuest: Yes"]},{"key":"dc:title","label":"Title","values":["Investigation of microstructurally dependent mechanical properties of cold sprayed copper using correlative microscopy"]}]}],"canonical_facts":{"dc:contributor":["Dr. Paul Eason","Dr. Stephen Stagon","Dr. Grant Bevill"],"dc:contributor.advisor":["Eason, Paul","Stagon, Stephen","Bevill, Grant"],"dc:creator":["Otto, Quintin","Otto, Quintin, 1995-"],"dc:date.available":["2023-05-17T07:00:00Z"],"dc:date.created":["2023-01-01T08:00:00Z"],"dc:date.issued":["Spring"],"dc:description.abstract":["This project employs multi-instrument materials characterization to analyze material made with the “Cold Spray” additive manufacturing process. Cold spray is an emerging additive manufacturing technique with unique benefits resulting from its low temperature adhesion process induced by plastic deformation. Metallic powder collides at high speeds creating three dimensional materials and coatings without the need for melting. Copper cold sprayed specimens were analyzed using a series of imaging techniques to characterize the microstructure at varying levels of detail and magnification. Scanning electron microscopy and electron back scattered diffraction were paired with microhardness testing to generate a correlative comparison between microstructure and physical properties of cold sprayed material. This research investigates how microhardness changes across the surface of highly deformed cold sprayed materials and the role inhomogeneous plastic deformation plays in level of microhardness. Both sprayed and transverse orientations were investigated providing a better understanding of the anisotropic mechanical properties created by the cold spray process. Results demonstrated that the cold sprayed microstructure exhibits an increase in microhardness with increasing levels of grain refinement in the sprayed orientation. This correlation was less apparent in the transverse orientation which reinforces the documented evidence that shows as-sprayed cold sprayed materials possess both anisotropic microstructure and properties."],"dc:description.note":["ProQuest: Yes"],"dc:identifier":["https://digitalcommons.unf.edu/etd/1187","https://digitalcommons.unf.edu/context/etd/article/2256/viewcontent/ETD1753PA.pdf"],"dc:rights":["http://rightsstatements.org/vocab/InC/1.0/"],"dc:subject":["Thesis","University of North Florida","UNF","Dissertations, Academic -- UNF -- Master of Science in Mechanical Engineering","Dissertations, Academic -- UNF -- Engineering","Cold Spray","Bonding, Grain Refinement, Microhardness","Manufacturing","Metallurgy","Other Materials Science and Engineering","Structural Materials"],"dc:subject.lcsh":["Copper powder -- Microstructure -- Analysis -- Technological innovations; Metal powders -- Microstructure -- Analysis -- Technological innovations; Copper -- Additives -- Microstructure -- Analysis -- Technological innovations; Copper powder -- Mechanical properties -- Analysis -- Technological innovations; Metal powders -- Mechanical properties -- Analysis -- Technological innovations; Copper -- Additives -- Mechanical properties -- Analysis -- Technological innovations; Copper powder -- Hardenability; Metal powders -- Hardenability; Copper -- Additives -- Hardenability; Copper powder -- Microstructure -- Imaging -- Technological innovations; Metal powders -- Microstructure -- Imaging -- Technological innovations; Copper -- Additives -- Microstructure -- Imaging -- Technological innovations; Electron microscopy -- Technique -- Testing; Microscopy -- Technique -- Testing; Microscopes -- Industrial applications -- Testing; Electron microscopy -- Industrial applications -- Testing; Additive manufacturing -- Microscopy; Metal coating -- Research"],"dc:title":["Investigation of microstructurally dependent mechanical properties of cold sprayed copper using correlative microscopy"],"dc:type":["Master's Thesis"],"thesis:degree_discipline":["Engineering"],"thesis:degree_name":["Master of Science in Mechanical Engineering (MSME)"],"thesis:institution_name":["University of North Florida. School of Engineering"]},"updated_at":"2026-11-18T20:04:21Z"}