Back to results

University of Ontario Institute of Technology

Design and implementation process for controls integration using CAN bus on a full function electric vehicle conversion

Abstract

dc:description.abstract

From the electrical engineering perspective, this thesis addresses the design and implementation of the conversion process from a hybrid electric to a full function electric vehicle (FFEV). The architecture selection process and main components of an electric vehicle (EV) are described, and an exhaustive literature review on the controller area network (CAN) is presented. The electrical and control system integration strategy is explained, along with the model-based algorithm programmed into the vehicle integration module (VIM). Emulating electronic control units (ECUs) from the original powertrain and controlling additional ones for the electrical drivetrain through CAN bus, along with keeping the same functionalities of a typical production vehicle makes this vehicle conversion similar to a factory built model. Finally, the tests and results originating from this conversion to a full electric powertrain are discussed. The vehicle features a 83.5 kWh Li-ion battery built in-house, resulting in an estimated range of 482 km.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science (MASc)
Level thesis:degree_level
Master of Applied Science (MASc)
Discipline thesis:degree_discipline
Automotive Engineering
Grantor
University of Ontario Institute of Technology
Year dc:date.issued
2014

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Provencher, Hugo
Advisor dc:contributor.advisor
  • Rohrauer, Greg

Subjects

dc:subject × 5

Rights

Language dc:language.iso
en

Identifiers

dc:identifier.*
Handle dc:identifier.uri
https://hdl.handle.net/10155/428

Chain of custody

source
Harvested from
Ontario Institute of Technology
Base URL
ontariotechu.scholaris.ca/server/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Provencher, Hugo. Design and implementation process for controls integration using CAN bus on a full function electric vehicle conversion. Master of Applied Science (MASc) thesis, University of Ontario Institute of Technology, 2014. https://hdl.handle.net/10155/428