{"id":{"repo_id":"usf","oai_identifier":"oai:digitalcommons.usf.edu:etd-1277"},"canonical_url":"https://search.ndltd.org/etd/usf/oai:digitalcommons.usf.edu:etd-1277","repository":{"repo_id":"usf","name":"University of South Florida","base_url":"https://digitalcommons.usf.edu/do/oai/"},"display":{"title":"Mechanical Properties of Particulate-Reinforced Boron Carbide Composites","abstract":"The mechanical properties of boron carbide (B4C) with 10 and 20 vol% particulate inclusions of commercially available nano-sized alpha-phase silicon carbide (a-SiC) or micron-sized titanium diboride (TiB2) were investigated so as to produce a fine-grained material with high hardness, toughness, and overall strength in order to increase the effectiveness of B4C as a structural ceramic, whose use in the field has been limited because of the extreme brittle nature of the material. Full density sintering of the ceramics (≥99% theoretical) was completed using the novel Plasma Pressure Compaction (P²C®) technique, which limited grain growth due to a reduced processing temperature and a significantly reduced consolidation time. The reinforced ceramic composites had particulate grains homogeneously distributed within the B4C matrix. X-ray diffraction patterns confirmed that the constituents did not interdiffuse. The four-point flexure strength for the monolithic B4C ceramic was found to be significantly larger than any recorded value found in scientific literature, and was most likely attributed to the fine-grained microstructure resulting from the P²C® processing. The mechanical properties of the nano-sized a-SiC-B4C ceramics showed a slight increase in the Chevron-notched four-point bend fracture toughness due to the crack deflection toughening mechanism. A slight decrease in the Vickers microhardness and the static elastic modulus values were also observed. A significant increase in the fracture toughness as well as a slight increase in the microhardness and elastic modulus of the micron-sized TiB2-B4C materials was found. The toughening mechanism of this composite was attributed to the slight chemical bond between the B4C matrix and the ultra-small, ultra-tough TiB2 particulates, which forced a propagating crack to completely rip apart the TiB2 reinforcing particles. This cleaving nature resulted in significant amounts of energy being absorbed by the micron-sized particulates. It was concluded that the composite with 20 vol% TiB2 allowed for the largest gain in toughness because it possessed the largest number of ultra small, ultra tough particulate-cracktip interactions.","abstract_html":"The mechanical properties of boron carbide (B4C) with 10 and 20 vol% particulate inclusions of commercially available nano-sized alpha-phase silicon carbide (a-SiC) or micron-sized titanium diboride (TiB2) were investigated so as to produce a fine-grained material with high hardness, toughness, and overall strength in order to increase the effectiveness of B4C as a structural ceramic, whose use in the field has been limited because of the extreme brittle nature of the material. Full density sintering of the ceramics (≥99% theoretical) was completed using the novel Plasma Pressure Compaction (P²C®) technique, which limited grain growth due to a reduced processing temperature and a significantly reduced consolidation time. The reinforced ceramic composites had particulate grains homogeneously distributed within the B4C matrix. X-ray diffraction patterns confirmed that the constituents did not interdiffuse. The four-point flexure strength for the monolithic B4C ceramic was found to be significantly larger than any recorded value found in scientific literature, and was most likely attributed to the fine-grained microstructure resulting from the P²C® processing. The mechanical properties of the nano-sized a-SiC-B4C ceramics showed a slight increase in the Chevron-notched four-point bend fracture toughness due to the crack deflection toughening mechanism. A slight decrease in the Vickers microhardness and the static elastic modulus values were also observed. A significant increase in the fracture toughness as well as a slight increase in the microhardness and elastic modulus of the micron-sized TiB2-B4C materials was found. The toughening mechanism of this composite was attributed to the slight chemical bond between the B4C matrix and the ultra-small, ultra-tough TiB2 particulates, which forced a propagating crack to completely rip apart the TiB2 reinforcing particles. This cleaving nature resulted in significant amounts of energy being absorbed by the micron-sized particulates. It was concluded that the composite with 20 vol% TiB2 allowed for the largest gain in toughness because it possessed the largest number of ultra small, ultra tough particulate-cracktip interactions.","abstract_has_math":false,"creators":["Hankla, Lorenzo W"],"institution":"University of South Florida","degree_name":null,"degree_level":"Thesis","degree_discipline":"Mechanical Engineering","degree_department":null,"school":null,"contributors":["Ashok Kumar, Ph.D.","Nathan Crane, Ph.D.","Muhammad Rahman, Ph.D.","Makoto Hirai, Ph.D.","Ramachandran Radhakrishnan, Ph.D."],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2008,"date_issued":"2008-07-07T07:00:00Z","date_published":"2008-07-07T07:00:00Z","updated_at":"2026-11-19T08:33:30Z","subjects":["B4C","silicon carbide","SiC","titanium diboride","TiB2","microhardness","fracture toughness","flexure strength","modulus of rupture","elastic modulus","Plasma Pressure Compaction","P2 C®","American Studies","Arts and Humanities"],"languages":["EN-US"],"rights":[],"rights_urls":[],"identifier_entries":[],"person_identifier_entries":[]},"links":{"outbound_url":"https://digitalcommons.usf.edu/etd/278","outbound_label":"Repository record","outbound_source":"dc:identifier","record_url":"https://digitalcommons.usf.edu/etd/278","record_label":"Repository record","record_kind":"record","record_source":"dc:identifier","download_url":null,"download_label":null,"download_source":null,"access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://digitalcommons.usf.edu/do/oai/?verb=GetRecord&metadataPrefix=oai_etdms&identifier=oai%3Adigitalcommons.usf.edu%3Aetd-1277","prefix":"oai_etdms"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor","label":"Contributor","values":["Ashok Kumar, Ph.D.","Nathan Crane, Ph.D.","Muhammad Rahman, Ph.D.","Makoto Hirai, Ph.D.","Ramachandran Radhakrishnan, Ph.D."]},{"key":"dc:creator","label":"Author","values":["Hankla, Lorenzo W"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2008-07-07T07:00:00Z"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Mechanical Engineering"]},{"key":"thesis:degree_level","label":"Degree Level","values":["Thesis","M.S.M.E."]},{"key":"thesis:institution_name","label":"Thesis Institution Name","values":["University of South Florida"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["B4C","silicon carbide","SiC","titanium diboride","TiB2","microhardness","fracture toughness","flexure strength","modulus of rupture","elastic modulus","Plasma Pressure Compaction","P2 C®","American Studies","Arts and Humanities"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language","label":"Dc Language","values":["EN-US"]},{"key":"dc:rights.license","label":"Dc Rights License","values":["default"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier","label":"Identifier","values":["https://digitalcommons.usf.edu/etd/278"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description","label":"Description","values":["The mechanical properties of boron carbide (B4C) with 10 and 20 vol% particulate inclusions of commercially available nano-sized alpha-phase silicon carbide (a-SiC) or micron-sized titanium diboride (TiB2) were investigated so as to produce a fine-grained material with high hardness, toughness, and overall strength in order to increase the effectiveness of B4C as a structural ceramic, whose use in the field has been limited because of the extreme brittle nature of the material. Full density sintering of the ceramics (≥99% theoretical) was completed using the novel Plasma Pressure Compaction (P²C®) technique, which limited grain growth due to a reduced processing temperature and a significantly reduced consolidation time. The reinforced ceramic composites had particulate grains homogeneously distributed within the B4C matrix. X-ray diffraction patterns confirmed that the constituents did not interdiffuse. The four-point flexure strength for the monolithic B4C ceramic was found to be significantly larger than any recorded value found in scientific literature, and was most likely attributed to the fine-grained microstructure resulting from the P²C® processing. The mechanical properties of the nano-sized a-SiC-B4C ceramics showed a slight increase in the Chevron-notched four-point bend fracture toughness due to the crack deflection toughening mechanism. A slight decrease in the Vickers microhardness and the static elastic modulus values were also observed. A significant increase in the fracture toughness as well as a slight increase in the microhardness and elastic modulus of the micron-sized TiB2-B4C materials was found. The toughening mechanism of this composite was attributed to the slight chemical bond between the B4C matrix and the ultra-small, ultra-tough TiB2 particulates, which forced a propagating crack to completely rip apart the TiB2 reinforcing particles. This cleaving nature resulted in significant amounts of energy being absorbed by the micron-sized particulates. It was concluded that the composite with 20 vol% TiB2 allowed for the largest gain in toughness because it possessed the largest number of ultra small, ultra tough particulate-cracktip interactions."]},{"key":"dc:title","label":"Title","values":["Mechanical Properties of Particulate-Reinforced Boron Carbide Composites"]}]}],"canonical_facts":{"dc:contributor":["Ashok Kumar, Ph.D.","Nathan Crane, Ph.D.","Muhammad Rahman, Ph.D.","Makoto Hirai, Ph.D.","Ramachandran Radhakrishnan, Ph.D."],"dc:creator":["Hankla, Lorenzo W"],"dc:date":["2008-07-07T07:00:00Z"],"dc:description":["The mechanical properties of boron carbide (B4C) with 10 and 20 vol% particulate inclusions of commercially available nano-sized alpha-phase silicon carbide (a-SiC) or micron-sized titanium diboride (TiB2) were investigated so as to produce a fine-grained material with high hardness, toughness, and overall strength in order to increase the effectiveness of B4C as a structural ceramic, whose use in the field has been limited because of the extreme brittle nature of the material. Full density sintering of the ceramics (≥99% theoretical) was completed using the novel Plasma Pressure Compaction (P²C®) technique, which limited grain growth due to a reduced processing temperature and a significantly reduced consolidation time. The reinforced ceramic composites had particulate grains homogeneously distributed within the B4C matrix. X-ray diffraction patterns confirmed that the constituents did not interdiffuse. The four-point flexure strength for the monolithic B4C ceramic was found to be significantly larger than any recorded value found in scientific literature, and was most likely attributed to the fine-grained microstructure resulting from the P²C® processing. The mechanical properties of the nano-sized a-SiC-B4C ceramics showed a slight increase in the Chevron-notched four-point bend fracture toughness due to the crack deflection toughening mechanism. A slight decrease in the Vickers microhardness and the static elastic modulus values were also observed. A significant increase in the fracture toughness as well as a slight increase in the microhardness and elastic modulus of the micron-sized TiB2-B4C materials was found. The toughening mechanism of this composite was attributed to the slight chemical bond between the B4C matrix and the ultra-small, ultra-tough TiB2 particulates, which forced a propagating crack to completely rip apart the TiB2 reinforcing particles. This cleaving nature resulted in significant amounts of energy being absorbed by the micron-sized particulates. It was concluded that the composite with 20 vol% TiB2 allowed for the largest gain in toughness because it possessed the largest number of ultra small, ultra tough particulate-cracktip interactions."],"dc:identifier":["https://digitalcommons.usf.edu/etd/278"],"dc:language":["EN-US"],"dc:rights.license":["default"],"dc:subject":["B4C","silicon carbide","SiC","titanium diboride","TiB2","microhardness","fracture toughness","flexure strength","modulus of rupture","elastic modulus","Plasma Pressure Compaction","P2 C®","American Studies","Arts and Humanities"],"dc:title":["Mechanical Properties of Particulate-Reinforced Boron Carbide Composites"],"thesis:degree_discipline":["Mechanical Engineering"],"thesis:degree_level":["Thesis","M.S.M.E."],"thesis:institution_name":["University of South Florida"]},"updated_at":"2026-11-19T08:33:30Z"}