{"id":{"repo_id":"vt","oai_identifier":"oai:vtechworks.lib.vt.edu:10919/143545"},"canonical_url":"https://search.ndltd.org/etd/vt/oai:vtechworks.lib.vt.edu:10919/143545","repository":{"repo_id":"vt","name":"Virginia Tech","base_url":"https://vtechworks.lib.vt.edu/oai/request"},"display":{"title":"Effect of Surface Roughness on Cloud Cavitation","abstract":"Cloud cavitation in hydraulic systems produces severe noise and erosion through collective bubble collapse and shock formation, yet the influence of wall surface roughness on cloud dynamics remains incompletely understood despite its practical importance in marine propulsion, turbomachinery, and biomedical devices. This study investigates the effect of controlled surface roughness on cloud cavitation dynamics in a converging-diverging Venturi test section with throat dimensions 50 × 5 mm. Four roughness levels (Ra = 5, 20, 55, 80 μm) were produced by laser etching on the diverging wall, spanning hydraulically smooth (k+ = 4.68), transitionally rough (k+ = 18.71 and 51.45), and fully rough (k+ = 74.84) regimes at a Reynolds number of 215492. High-speed videography combined with optical flow algorithm (RAFT) enabled quantitative extraction of cavity length, shedding frequency, and re-entrant jet characteristics. Results demonstrate that increasing surface roughness systematically reduces mean cavity length and increases shedding frequency. Re-entrant jets become progressively thinner and shorter as roughness increases, while microscale grooves on roughness elements act as nucleation sites that trap bubbles and, at higher roughness levels, disrupt the boundary layer and alter vorticity production. These findings confirm that roughness modifies cloud cavitation through coupled mechanisms such as, enhanced nucleation at element-scale features and altered boundary-layer dynamics that weaken large-scale re-entrant jet formation.","abstract_html":"Cloud cavitation in hydraulic systems produces severe noise and erosion through collective bubble collapse and shock formation, yet the influence of wall surface roughness on cloud dynamics remains incompletely understood despite its practical importance in marine propulsion, turbomachinery, and biomedical devices. This study investigates the effect of controlled surface roughness on cloud cavitation dynamics in a converging-diverging Venturi test section with throat dimensions 50 × 5 mm. Four roughness levels (Ra = 5, 20, 55, 80 μm) were produced by laser etching on the diverging wall, spanning hydraulically smooth (k+ = 4.68), transitionally rough (k+ = 18.71 and 51.45), and fully rough (k+ = 74.84) regimes at a Reynolds number of 215492. High-speed videography combined with optical flow algorithm (RAFT) enabled quantitative extraction of cavity length, shedding frequency, and re-entrant jet characteristics. Results demonstrate that increasing surface roughness systematically reduces mean cavity length and increases shedding frequency. Re-entrant jets become progressively thinner and shorter as roughness increases, while microscale grooves on roughness elements act as nucleation sites that trap bubbles and, at higher roughness levels, disrupt the boundary layer and alter vorticity production. These findings confirm that roughness modifies cloud cavitation through coupled mechanisms such as, enhanced nucleation at element-scale features and altered boundary-layer dynamics that weaken large-scale re-entrant jet formation.","abstract_has_math":false,"creators":["Suman, Samyukta"],"institution":"Virginia Tech","degree_name":"Master of Science","degree_level":"masters","degree_discipline":"Aerospace Engineering","degree_department":"Aerospace and Ocean Engineering","school":null,"contributors":[],"advisors":[],"committee_chairs":["Coutier-Delgosha, Olivier"],"committee_members":["Lowe, Kevin T.","Devenport, William J."],"year":2026,"date_issued":"2026-06-30","date_published":"2026-06-30","updated_at":"2026-11-18T20:01:58Z","subjects":["Cloud cavitation","surface roughness"],"languages":["en"],"rights":["In Copyright"],"rights_urls":["http://rightsstatements.org/vocab/InC/1.0/"],"identifier_entries":[{"key":"dc:identifier.other","label":"Dc Identifier Other","values":["vt_gsexam:47345"],"render_values":[{"text":"vt_gsexam:47345","href":null,"code":true}]}],"person_identifier_entries":[]},"links":{"outbound_url":"https://hdl.handle.net/10919/143545","outbound_label":"Handle","outbound_source":"dc:identifier.uri","record_url":"https://hdl.handle.net/10919/143545","record_label":"Repository record","record_kind":"handle","record_source":"dc:identifier.uri","download_url":null,"download_label":null,"download_source":null,"access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://vtechworks.lib.vt.edu/oai/request?verb=GetRecord&metadataPrefix=dim&identifier=oai%3Avtechworks.lib.vt.edu%3A10919%2F143545","prefix":"dim"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.committeechair","label":"Committee Chair","values":["Coutier-Delgosha, Olivier"]},{"key":"dc:contributor.committeemember","label":"Committee Member","values":["Lowe, Kevin T.","Devenport, William J."]},{"key":"dc:contributor.department","label":"Department","values":["Aerospace and Ocean Engineering"]},{"key":"dc:creator","label":"Author","values":["Suman, Samyukta"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.accessioned","label":"Dc Date Accessioned","values":["2026-07-01T08:00:58Z"]},{"key":"dc:date.available","label":"Dc Date Available","values":["2026-07-01T08:00:58Z"]},{"key":"dc:date.issued","label":"Date","values":["2026-06-30"]},{"key":"dc:publisher","label":"Institution","values":["Virginia Tech"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Aerospace Engineering"]},{"key":"thesis:degree_level","label":"Degree Level","values":["masters"]},{"key":"thesis:degree_name","label":"Degree Name","values":["Master of Science"]},{"key":"thesis:institution_name","label":"Thesis Institution Name","values":["Virginia Polytechnic Institute and State University"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["Cloud cavitation","surface roughness"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.iso","label":"Language (ISO)","values":["en"]},{"key":"dc:rights","label":"Dc Rights","values":["In Copyright"]},{"key":"dc:rights.uri","label":"Rights URI","values":["http://rightsstatements.org/vocab/InC/1.0/"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.other","label":"Dc Identifier Other","values":["vt_gsexam:47345"]},{"key":"dc:identifier.uri","label":"Identifier URI","values":["https://hdl.handle.net/10919/143545"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["Cloud cavitation in hydraulic systems produces severe noise and erosion through collective bubble collapse and shock formation, yet the influence of wall surface roughness on cloud dynamics remains incompletely understood despite its practical importance in marine propulsion, turbomachinery, and biomedical devices. This study investigates the effect of controlled surface roughness on cloud cavitation dynamics in a converging-diverging Venturi test section with throat dimensions 50 × 5 mm. Four roughness levels (Ra = 5, 20, 55, 80 μm) were produced by laser etching on the diverging wall, spanning hydraulically smooth (k+ = 4.68), transitionally rough (k+ = 18.71 and 51.45), and fully rough (k+ = 74.84) regimes at a Reynolds number of 215492. High-speed videography combined with optical flow algorithm (RAFT) enabled quantitative extraction of cavity length, shedding frequency, and re-entrant jet characteristics. Results demonstrate that increasing surface roughness systematically reduces mean cavity length and increases shedding frequency. Re-entrant jets become progressively thinner and shorter as roughness increases, while microscale grooves on roughness elements act as nucleation sites that trap bubbles and, at higher roughness levels, disrupt the boundary layer and alter vorticity production. These findings confirm that roughness modifies cloud cavitation through coupled mechanisms such as, enhanced nucleation at element-scale features and altered boundary-layer dynamics that weaken large-scale re-entrant jet formation."]},{"key":"dc:description.abstractgeneral","label":"General Abstract","values":["When water (or any liquid) flows very fast or experiences a sudden drop in pressure, tiny vapor bubbles can form inside it, this process called cavitation. This happens in pumps, ship propellers, and even some medical devices. The problem arises when groups of these bubbles travel into a region of higher pressure and collapse together violently, almost like tiny implosions. This is know as cloud cavitation. It produces loud noise, strong vibrations, and over time can erode and damage metal surfaces, shortening the life of expensive equipment. Most engineering designs assume that surfaces are perfectly smooth, but real-world surfaces are never fully smooth, they have manufacturing defects such as small scratches and degradation over time. This study looks at how these small surface bumps and grooves, which is barely visible, affect the way bubble clouds form and collapse. Using high-speed cameras and computer-based motion-tracking, the top surface of a Venturi was given four different levels of roughness, and the resulting bubble clouds were measured and compared. The findings in this study will help us understand if surface texture, often viewed as an unwanted manufacturing imperfection, could instead be used as a simple, low-cost tool to help engineers control where and how cavitation damage occurs in real machines."]},{"key":"dc:description.degree","label":"Dc Description Degree","values":["Master of Science"]},{"key":"dc:format.medium","label":"Dc Format Medium","values":["ETD"]},{"key":"dc:title","label":"Title","values":["Effect of Surface Roughness on Cloud Cavitation"]}]}],"canonical_facts":{"dc:contributor.committeechair":["Coutier-Delgosha, Olivier"],"dc:contributor.committeemember":["Lowe, Kevin T.","Devenport, William J."],"dc:contributor.department":["Aerospace and Ocean Engineering"],"dc:creator":["Suman, Samyukta"],"dc:date.accessioned":["2026-07-01T08:00:58Z"],"dc:date.available":["2026-07-01T08:00:58Z"],"dc:date.issued":["2026-06-30"],"dc:description.abstract":["Cloud cavitation in hydraulic systems produces severe noise and erosion through collective bubble collapse and shock formation, yet the influence of wall surface roughness on cloud dynamics remains incompletely understood despite its practical importance in marine propulsion, turbomachinery, and biomedical devices. This study investigates the effect of controlled surface roughness on cloud cavitation dynamics in a converging-diverging Venturi test section with throat dimensions 50 × 5 mm. Four roughness levels (Ra = 5, 20, 55, 80 μm) were produced by laser etching on the diverging wall, spanning hydraulically smooth (k+ = 4.68), transitionally rough (k+ = 18.71 and 51.45), and fully rough (k+ = 74.84) regimes at a Reynolds number of 215492. High-speed videography combined with optical flow algorithm (RAFT) enabled quantitative extraction of cavity length, shedding frequency, and re-entrant jet characteristics. Results demonstrate that increasing surface roughness systematically reduces mean cavity length and increases shedding frequency. Re-entrant jets become progressively thinner and shorter as roughness increases, while microscale grooves on roughness elements act as nucleation sites that trap bubbles and, at higher roughness levels, disrupt the boundary layer and alter vorticity production. These findings confirm that roughness modifies cloud cavitation through coupled mechanisms such as, enhanced nucleation at element-scale features and altered boundary-layer dynamics that weaken large-scale re-entrant jet formation."],"dc:description.abstractgeneral":["When water (or any liquid) flows very fast or experiences a sudden drop in pressure, tiny vapor bubbles can form inside it, this process called cavitation. This happens in pumps, ship propellers, and even some medical devices. The problem arises when groups of these bubbles travel into a region of higher pressure and collapse together violently, almost like tiny implosions. This is know as cloud cavitation. It produces loud noise, strong vibrations, and over time can erode and damage metal surfaces, shortening the life of expensive equipment. Most engineering designs assume that surfaces are perfectly smooth, but real-world surfaces are never fully smooth, they have manufacturing defects such as small scratches and degradation over time. This study looks at how these small surface bumps and grooves, which is barely visible, affect the way bubble clouds form and collapse. Using high-speed cameras and computer-based motion-tracking, the top surface of a Venturi was given four different levels of roughness, and the resulting bubble clouds were measured and compared. The findings in this study will help us understand if surface texture, often viewed as an unwanted manufacturing imperfection, could instead be used as a simple, low-cost tool to help engineers control where and how cavitation damage occurs in real machines."],"dc:description.degree":["Master of Science"],"dc:format.medium":["ETD"],"dc:identifier.other":["vt_gsexam:47345"],"dc:identifier.uri":["https://hdl.handle.net/10919/143545"],"dc:language.iso":["en"],"dc:publisher":["Virginia Tech"],"dc:rights":["In Copyright"],"dc:rights.uri":["http://rightsstatements.org/vocab/InC/1.0/"],"dc:subject":["Cloud cavitation","surface roughness"],"dc:title":["Effect of Surface Roughness on Cloud Cavitation"],"dc:type":["Thesis"],"thesis:degree_discipline":["Aerospace Engineering"],"thesis:degree_level":["masters"],"thesis:degree_name":["Master of Science"],"thesis:institution_name":["Virginia Polytechnic Institute and State University"]},"updated_at":"2026-11-18T20:01:58Z"}