{"id":{"repo_id":"vt","oai_identifier":"oai:vtechworks.lib.vt.edu:10919/39557"},"canonical_url":"https://search.ndltd.org/etd/vt/oai:vtechworks.lib.vt.edu:10919/39557","repository":{"repo_id":"vt","name":"Virginia Tech","base_url":"https://vtechworks.lib.vt.edu/oai/request"},"display":{"title":"Damage analysis and mechanical response of as-received and heat-treated Nicalon/CAS-II glass-ceramic matrix composites","abstract":"Experimental results of damage development in and mechanical response of heat-treated NicaloniCAS-II laminates subjected to monotonic flexure and axial loading and to cyclic tensile loading are reported. The specimens were subjected to post-processing heat treatments at 900°, 1000°, and l100°C in air for 100 hours. Changes at the fiber/matrix interface/interphase due to post-processing heat treatments were also characterized. The combined effect of fiber debonding and transverse matrix cracking in both 90° and 0° plies plays an important role in damage development in [0/90]₄₅ Nicalon/CAS-II laminates, especially in developing the secondary damage modes such as longitudinal matrix cracking and delamination. Frictional wear effects found in cyclically loaded specimens may be responsible for the observed temperature profiles during the intermediate stage of fatigue life. It is also believed that frictional wear is critical to the failure of notch sensitive fibers. Different damage modes such as \"brittle\" matrix crack propagation and \"quasi-brittle\" matrix crack propagation were observed in heat-treated specimens. Results obtained from microanalysis using an analytical scanning transmission electron microscope equipped with an energy dispersive spectrometer, and microindentation indicated that the changes of damage and failure modes were directly related to the changes of characteristics at the fiber/matreix interface/interphase.","abstract_html":"Experimental results of damage development in and mechanical response of heat-treated NicaloniCAS-II laminates subjected to monotonic flexure and axial loading and to cyclic tensile loading are reported. The specimens were subjected to post-processing heat treatments at 900°, 1000°, and l100°C in air for 100 hours. Changes at the fiber/matrix interface/interphase due to post-processing heat treatments were also characterized. The combined effect of fiber debonding and transverse matrix cracking in both 90° and 0° plies plays an important role in damage development in [0/90]₄₅ Nicalon/CAS-II laminates, especially in developing the secondary damage modes such as longitudinal matrix cracking and delamination. Frictional wear effects found in cyclically loaded specimens may be responsible for the observed temperature profiles during the intermediate stage of fatigue life. It is also believed that frictional wear is critical to the failure of notch sensitive fibers. Different damage modes such as &quot;brittle&quot; matrix crack propagation and &quot;quasi-brittle&quot; matrix crack propagation were observed in heat-treated specimens. Results obtained from microanalysis using an analytical scanning transmission electron microscope equipped with an energy dispersive spectrometer, and microindentation indicated that the changes of damage and failure modes were directly related to the changes of characteristics at the fiber/matreix interface/interphase.","abstract_has_math":false,"creators":["Lee, Shin Steven"],"institution":"Virginia Tech","degree_name":"Ph. D.","degree_level":"doctoral","degree_discipline":"Engineering Mechanics","degree_department":"Engineering Mechanics","school":null,"contributors":[],"advisors":[],"committee_chairs":["Stinchcomb, Wayne W."],"committee_members":["Hasselman, D.P.H.","Henneke, Edmund G.","Reifsnider, Kenneth L.","Ribbe, Paul H.","Smith, Charles W."],"year":1993,"date_issued":"1993-04-05","date_published":"1993-04-05","updated_at":"2026-11-18T19:59:49Z","subjects":["Ceramic-matrix composites -- Effect of temperature on","Ceramic-matrix composites -- Mechanical properties","Fiber-reinforced ceramics -- Effect of temperature on","Fiber-reinforced ceramics -- Mechanical properties","Glass-ceramics -- Effect of temperature on","Glass-ceramics -- Mechanical properties"],"languages":["en"],"rights":["In Copyright"],"rights_urls":["http://rightsstatements.org/vocab/InC/1.0/"],"identifier_entries":[{"key":"dc:identifier.other","label":"Dc Identifier Other","values":["etd-10032007-171633"],"render_values":[{"text":"etd-10032007-171633","href":null,"code":true}]},{"key":"dc:identifier.sourceurl","label":"Source URL","values":["http://scholar.lib.vt.edu/theses/available/etd-10032007-171633/"],"render_values":[{"text":"http://scholar.lib.vt.edu/theses/available/etd-10032007-171633/","href":"http://scholar.lib.vt.edu/theses/available/etd-10032007-171633/","code":true}]}],"person_identifier_entries":[]},"links":{"outbound_url":"http://hdl.handle.net/10919/39557","outbound_label":"Handle","outbound_source":"dc:identifier.uri","record_url":"http://hdl.handle.net/10919/39557","record_label":"Repository record","record_kind":"handle","record_source":"dc:identifier.uri","download_url":null,"download_label":null,"download_source":null,"access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://vtechworks.lib.vt.edu/oai/request?verb=GetRecord&metadataPrefix=dim&identifier=oai%3Avtechworks.lib.vt.edu%3A10919%2F39557","prefix":"dim"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.committeechair","label":"Committee Chair","values":["Stinchcomb, Wayne W."]},{"key":"dc:contributor.committeemember","label":"Committee Member","values":["Hasselman, D.P.H.","Henneke, Edmund G.","Reifsnider, Kenneth L.","Ribbe, Paul H.","Smith, Charles W."]},{"key":"dc:contributor.department","label":"Department","values":["Engineering Mechanics"]},{"key":"dc:creator","label":"Author","values":["Lee, Shin Steven"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.accepted","label":"Dc Date Accepted","values":["2007-10-03"]},{"key":"dc:date.accessioned","label":"Dc Date Accessioned","values":["2014-03-14T21:19:42Z"]},{"key":"dc:date.available","label":"Dc Date Available","values":["2014-03-14T21:19:42Z","2007-10-03"]},{"key":"dc:date.issued","label":"Date","values":["1993-04-05"]},{"key":"dc:date.submitted","label":"Dc Date Submitted","values":["2007-10-03"]},{"key":"dc:publisher","label":"Institution","values":["Virginia Tech"]},{"key":"dc:relation.haspart","label":"Dc Relation Haspart","values":["LD5655.V856_1993.L49.pdf"]},{"key":"dc:relation.isformatof","label":"Dc Relation Isformatof","values":["OCLC# 28564094"]},{"key":"dc:type","label":"Dc Type","values":["Dissertation"]},{"key":"dc:type.dcmitype","label":"Dc Type Dcmitype","values":["Text"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Engineering Mechanics"]},{"key":"thesis:degree_level","label":"Degree Level","values":["doctoral"]},{"key":"thesis:degree_name","label":"Degree Name","values":["Ph. D."]},{"key":"thesis:institution_name","label":"Thesis Institution Name","values":["Virginia Polytechnic Institute and State University"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject.lcc","label":"Dc Subject Lcc","values":["LD5655.V856 1993.L49"]},{"key":"dc:subject.lcsh","label":"Dc Subject Lcsh","values":["Ceramic-matrix composites -- Effect of temperature on","Ceramic-matrix composites -- Mechanical properties","Fiber-reinforced ceramics -- Effect of temperature on","Fiber-reinforced ceramics -- Mechanical properties","Glass-ceramics -- Effect of temperature on","Glass-ceramics -- Mechanical properties"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.iso","label":"Language (ISO)","values":["en"]},{"key":"dc:rights","label":"Dc Rights","values":["In Copyright"]},{"key":"dc:rights.uri","label":"Rights URI","values":["http://rightsstatements.org/vocab/InC/1.0/"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.other","label":"Dc Identifier Other","values":["etd-10032007-171633"]},{"key":"dc:identifier.sourceurl","label":"Source URL","values":["http://scholar.lib.vt.edu/theses/available/etd-10032007-171633/"]},{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://hdl.handle.net/10919/39557"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["Experimental results of damage development in and mechanical response of heat-treated NicaloniCAS-II laminates subjected to monotonic flexure and axial loading and to cyclic tensile loading are reported. The specimens were subjected to post-processing heat treatments at 900°, 1000°, and l100°C in air for 100 hours. Changes at the fiber/matrix interface/interphase due to post-processing heat treatments were also characterized. The combined effect of fiber debonding and transverse matrix cracking in both 90° and 0° plies plays an important role in damage development in [0/90]₄₅ Nicalon/CAS-II laminates, especially in developing the secondary damage modes such as longitudinal matrix cracking and delamination. Frictional wear effects found in cyclically loaded specimens may be responsible for the observed temperature profiles during the intermediate stage of fatigue life. It is also believed that frictional wear is critical to the failure of notch sensitive fibers. Different damage modes such as \"brittle\" matrix crack propagation and \"quasi-brittle\" matrix crack propagation were observed in heat-treated specimens. Results obtained from microanalysis using an analytical scanning transmission electron microscope equipped with an energy dispersive spectrometer, and microindentation indicated that the changes of damage and failure modes were directly related to the changes of characteristics at the fiber/matreix interface/interphase."]},{"key":"dc:description.degree","label":"Dc Description Degree","values":["Ph. D."]},{"key":"dc:format.extent","label":"Dc Format Extent","values":["xi, 180 leaves"]},{"key":"dc:format.medium","label":"Dc Format Medium","values":["BTD"]},{"key":"dc:format.mimetype","label":"Dc Format Mimetype","values":["application/pdf"]},{"key":"dc:title","label":"Title","values":["Damage analysis and mechanical response of as-received and heat-treated Nicalon/CAS-II glass-ceramic matrix composites"]}]}],"canonical_facts":{"dc:contributor.committeechair":["Stinchcomb, Wayne W."],"dc:contributor.committeemember":["Hasselman, D.P.H.","Henneke, Edmund G.","Reifsnider, Kenneth L.","Ribbe, Paul H.","Smith, Charles W."],"dc:contributor.department":["Engineering Mechanics"],"dc:creator":["Lee, Shin Steven"],"dc:date.accepted":["2007-10-03"],"dc:date.accessioned":["2014-03-14T21:19:42Z"],"dc:date.available":["2014-03-14T21:19:42Z","2007-10-03"],"dc:date.issued":["1993-04-05"],"dc:date.submitted":["2007-10-03"],"dc:description.abstract":["Experimental results of damage development in and mechanical response of heat-treated NicaloniCAS-II laminates subjected to monotonic flexure and axial loading and to cyclic tensile loading are reported. The specimens were subjected to post-processing heat treatments at 900°, 1000°, and l100°C in air for 100 hours. Changes at the fiber/matrix interface/interphase due to post-processing heat treatments were also characterized. The combined effect of fiber debonding and transverse matrix cracking in both 90° and 0° plies plays an important role in damage development in [0/90]₄₅ Nicalon/CAS-II laminates, especially in developing the secondary damage modes such as longitudinal matrix cracking and delamination. Frictional wear effects found in cyclically loaded specimens may be responsible for the observed temperature profiles during the intermediate stage of fatigue life. It is also believed that frictional wear is critical to the failure of notch sensitive fibers. Different damage modes such as \"brittle\" matrix crack propagation and \"quasi-brittle\" matrix crack propagation were observed in heat-treated specimens. Results obtained from microanalysis using an analytical scanning transmission electron microscope equipped with an energy dispersive spectrometer, and microindentation indicated that the changes of damage and failure modes were directly related to the changes of characteristics at the fiber/matreix interface/interphase."],"dc:description.degree":["Ph. D."],"dc:format.extent":["xi, 180 leaves"],"dc:format.medium":["BTD"],"dc:format.mimetype":["application/pdf"],"dc:identifier.other":["etd-10032007-171633"],"dc:identifier.sourceurl":["http://scholar.lib.vt.edu/theses/available/etd-10032007-171633/"],"dc:identifier.uri":["http://hdl.handle.net/10919/39557"],"dc:language.iso":["en"],"dc:publisher":["Virginia Tech"],"dc:relation.haspart":["LD5655.V856_1993.L49.pdf"],"dc:relation.isformatof":["OCLC# 28564094"],"dc:rights":["In Copyright"],"dc:rights.uri":["http://rightsstatements.org/vocab/InC/1.0/"],"dc:subject.lcc":["LD5655.V856 1993.L49"],"dc:subject.lcsh":["Ceramic-matrix composites -- Effect of temperature on","Ceramic-matrix composites -- Mechanical properties","Fiber-reinforced ceramics -- Effect of temperature on","Fiber-reinforced ceramics -- Mechanical properties","Glass-ceramics -- Effect of temperature on","Glass-ceramics -- Mechanical properties"],"dc:title":["Damage analysis and mechanical response of as-received and heat-treated Nicalon/CAS-II glass-ceramic matrix composites"],"dc:type":["Dissertation"],"dc:type.dcmitype":["Text"],"thesis:degree_discipline":["Engineering Mechanics"],"thesis:degree_level":["doctoral"],"thesis:degree_name":["Ph. D."],"thesis:institution_name":["Virginia Polytechnic Institute and State University"]},"updated_at":"2026-11-18T19:59:49Z"}